At Sandvik Materials Technology, Argon gas is used as furnace atmosphere when heattreating hot rolled Wire. Upon heating chromium steel Wire, a rich oxidelayer forms on the Wire surface. The abstract of this masters thesis is to enhance the understanding of the constitution of the oxidelayers and the influence of the furnace atmosphere. This will be achieved by performing a number of annealing experiments on laboratory level. Also, the aim is to understand the chemical reactions and physical mecanisms controlling the pickling process.

This report investigates a possible solution to the problem with adapting wave powerplants to work in countries with tidal water. The Wire connecting the buoy at the surface with the generator at the bottom needs to adjust to the varying water depth. Our solution to this problem is to attach the Wire to a jack which is then placed inside the buoy. The jack is then powered by an electric engine. The report discuss what forces the buoy will be exposed to and then the structural integrity of the design is evaluated through simulations.

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping Wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel Wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

Sandvik Wire needed a review of the administrative part of the order fulfillment process and especially the work around packing and the inventory of finished goods. Therefore we acquired the assignment to investigate the administrative part of the order fulfillment process in the company with the purpose to identify potential for improvement. This investigation was performed with focus on the terminal and packing functions. The purpose with the investigation was also to identify critical factors for an efficient order fulfillment process and investigate if information quality is such a factor.Data was collected through interviews and observations on Sandvik Wire. With the help of this data the information and material flows was mapped, the work within terminal and packing, and adjacent functions was investigated.

This master thesis was conducted at Motala Wire Works Ltd (MWW) in Motala during the autumn and winter of 2007-2008. The thesis named ?Future layout of Motala Wire Works? focuses on making a better planed layout for the factory, which also take in to consideration future changes.Motala Wire Work produces Wire mesh products of varying sorts for the white goods industry. The factory was started by Electrolux during the 1950?s.

In order to decrease the disturbance from a cable testing equipment, the company Ericsson Network Technologies in Falun determined to design a new series resonant test system with a lower frequency. The new equipment is of series resonant type with a system frequency of 500 Hz. This equipment consists of an inductor, a capacitor and a voltage source. The voltage source is the same as the old one, the cable acts as the capacitor but the inductor has to be designed especially for the new equipment. In this thesis work several air coil inductor types were examined.

 Titel: Säkerheten Främst ? en kvalitativ studie av Sandviks interna säkerhetskampanjNivå: C-uppsats i medie- och kommunikationsvetenskap, 15 högskolepoängFörfattare: Caroline HolmströmHandledare: Mats HyvönenExaminator: Mathias Sylwan Syfte: Syftet med uppsatsen är att studera hur de anställda på produktionsenheterna Wire Sandviken (WS) och Primary (PP) som ingår i produktområdet Wire and Heating Technology (WHT) inom affärsområdet Sandvik Materials Technology (SMT) på Sandvik har tagit emot kampanjen Säkerheten Främst samt att undersöka huruvida operatörer och flödeschefer har förslag på hur kommunikationsavdelningen vidare kan stötta säkerhetsarbetet och utveckla kampanjen. Dessa resultat diskuteras i förhållande till resultatet från en enkätundersökning vilken genomfördes 2014 vid WHT.                                                Frågeställningar:     - Hur har kampanjen Säkerheten Främst tagits emot av anställda vid produktion på WS och PP?- Hur kan kampanjen Säkerheten Främst ytterligare utvecklas? Metod: Kvalitativa, semistrukturerade intervjuer med flödeschefer och operatörer vid WS och PP. Totalt åtta respondenter vid fyra olika avdelningar.

AimThe aim of this study was to evaluate the activity recorded with electromyography (EMG) fine-Wire electrodes, in transversus abdominis (TrA) and rectus abdominis (RA) while performing various stabilization exercises, and to investigate how the level of activation was affected by specific instructionsMethodTen physically active women (27.1 ± 5.5year, 1.74 ± 0.05 m, 67.1 ± 8.6 kg) performed six different stabilization exercises (four lying supine with bent knees and hips and two in four point kneeling). They performed two sets of exercises, the first without and the second with specific instructions. The specific instruction was ?abdominal hollowing to activate? TrA. The fine-Wire electrodes were inserted bilateral into TrA and RA with an injection needle with guidance from an ultrasound.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel Wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the Wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

The main goal with the master thesis has been to do a status evaluation of the chain machinery with its start chain and Wire to secure the production on a short basis due to that a reconstruction is not planned at this time. An evaluation of the condition of the start chain and the rollers in the chain depository has been done. An offer has been requested for a new start chain and the evaluation of the start chains may be a basis for the decision taking. The production has been able to go on, although it has arisen some problems which have been difficult to find the causes for. There is no gathered ?picture? of the machinery status and a mapping of each machinery has been compiled of comprehensive logs.

This thesis was performed at Indusec ABin Stockholm. Indusec AB is a companythat develops security solutions.Together with the Police of Sweden theyhave gotten the assignment to develop anapplication based on one of theiralready existing product Inferno soundbarrier. This application is supposed tobe mounted on a ballistic shield thatthe police use, the application consistsof a speaker box (the sound barrier) anda trigger with Wire. The trigger withWire is the part that will be addressedin this thesis. The application willthen be used as a tool to surprise atarget at various skirmishes.The project consists of three majorphases, pre-study, concept generationand modeling.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated Wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated Wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the Wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated Wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated Wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the Wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated Wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated Wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the Wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.