The first commercially produced wind turbines in Sweden are starting to reach theend of their lifetime after approximately 25 years of producing energy. The cost fordismantling the turbines, according to Ardefors et al. (2009), is calculated to be 1-2 %of the total investment of the wind turbines. The purpose of this master thesis is tomap the dismantling process of wind turbines in Sweden and try to find a sustainablesolution for the future.To make sure that a correct dismantling process takes place, and that the financialaspect is covered, a proposal for a financial guarantee is worked upon. A nationalunanimity will be created through a financial guarantee and the risk will be minimalof a third party getting afflicted.Studies of literature and interviews have been carried out.

ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other methods than those available today, and particularly, I consider how these methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

Wind damages next to strip roads in 1st and 2nd thinning in Boxholm, Östergötland Anneli Fransson, SLU, inst f sydsvensk skogsvetenskap, Examensarbete no 108 Wind damage is something we are all familiar with since the storms Gudrun (2005) and Per (2007). Research about strip roads and wind damage is very limited. It is commonly known that the trees next to the strip roads more often fall whit heavy winds, and the purpose of this thesis was to verify this statement. Data was collected from first- and second thinnings at Boxholms Skogar AB, Östergötland. In first thinnings data was collected from both spruce and pine stands and second thinnings only data from spruce stands was collected.

Consumers don´t buy products, they buy brands. To create a succesful brand, you need a clear identity,and it will be strengthened by for instance a graphic profile. This project includes a theoretical partabout corporate identity and graphic profiling, and a description of the work with the graphic profile ofEM-loppet. The aim with this project is to strengthen the identity of EM-loppet, by making a clear andunified profile. The project has been accomplished by studying literature, searching information on theInternet and via personal contacts.

The Swedish Parliament has decided to increase the share of electricity produced by wind power. The same parliament has decided that the Sami have the right to herd reindeer over 50% of the country's land area. In this literature review the potential impact wind power development and associated infrastructure may have on reindeer husbandry conditions are examined. The unique physiology of the reindeer enables it to live out of grazing in the arctic climate in the north of Sweden. For reindeer husbandry to be long-term productive and sustainable, it is important that there is enough land for grazing. The research available on how reindeer are disturbed by human activities such as roads, mines, hikers, etc., clearly indicates that the reindeer avoids areas close to such disturbance.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

Design, Grafiskt program, Symbol, Hair.

This master thesis has been performed at Solvina in Gothenburg for Skellefteå Kraftand Vattenfall Eldistribution. The aim of it is to investigate the consequences of theinstallation of a wind power plant on the mountain Uljabuouda in the vicinity ofArjeplog. Especially the impacts on voltage and transient stability are examined.Furthermore, the amount of extra strain on the voltage regulation equipment and theneeds for increased regulation capabilities are looked into.The wind power plant is planned to be built by Skellefteå Kraft and connected to a130 kV grid owned by Vattenfall Eldistribution. The work comprehends the followingmain parts:- Theoretical studies aimed at wind turbines and power system stability issues.- Modelling of the type of wind turbines assumed to be built on Uljabuouda.- Simulations of different operation cases and analysis of the simulation results.The results from the simulations show that, as far as voltage stability and extraworkload on tap-changers are concerned, the wind power plant does not, in anysignificant manner, worsen the present conditions. The problem of overloading theline between Arvidsjaur and Vargfors is also minor.

This is a feasibility study that examines various aspects of building a wind farm on Malmön in Norrköping. The feasibility study deals with interests of conflict, park design, electrical connections, production calculation, financial calculations and operating- and timetable.The report is divided into two distinct parts. First a theoretical part, which deals with conflicting interests, park design and electrical connections. Second a part with simulations dealing with production calculations, and financial calculations.Opposing interests are mapped so that problem areas can be found, and help put focus on the right places at a future environmental impact assessment (EIA). There are a number of areas where planners have to assess on an EIA, this thesis point on the most important areas.

The aim with this study was to collect fundamental information, and to plan, a windpower farm in Juddhult , Småland in southern Sweden. The goal is to collect the bestavailable projecting planning support. The pieces of this projecting planning supportthat will be presented is; Environmental Consequence Description (MKB), productioncalculations, comparisons between different plant types, economic calculations, evaluatethe economy and give some farm design suggestions. The imagined wind farm will belocated in forest environment and which may cause a number of new problems. Specialinterest that will be affected, where special consideration because of the forestenvironmental is requested is, hunting, wetlands, ancient monuments and windturbulence.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

The Swedish Government has decided that Wind power should have a higher contribution to the electricity generation in Sweden. Their goal is that, by 2015, the yearly production by Wind power should generate 10 TWh. In year of 2006, the 760 wind mills in Sweden generated only 0,936 TWh. Despite good wind conditions in a large extend of Sweden's land- and coast areas, the slow rate of new wind mills establishments will likely result in unattainable goals. The major problem for new establishments of wind mills is the extensive and complicated permission process. An expert group of environmental studies (Expertgruppen för miljöstudier) was commissioned by the Government to make a report concerning the problems with the expansion of wind power in Sweden.

This report describes the development of an application in collaboration with Designingenjörerna AB. The company has worked for a long time with a community platform and they required an application where users can create their own unique profile representations, called Avatar Creator. An Avatar Creator is computer based application, which makes it possible to create a virtual character. The problem area behind this is that, large websites require a lot of administrative work when people upload profile pictures on different community pages. They can contain abusive material or pictures of other people rather than those who created the profile.The questions in this report are, how can an Avatar Creator help user to get a unique profile of himself? What are the advantages and disadvantages of an Avatar Creator? How to create a user-friendly application?To understand how an Avatar Creator works and get ideas to create an application, exiting Avatar Creators were reviewed on the Web.Collaborative work with Designingenjörerna AB was done to pin down the requirements for the Avatar creator application.

A strong brand can help a company to be easier to recognize and be remembered by their customers. Part of branding is to create a visual appearance which is called a graphic profile and contains information on for instance a logo, colours or typography.The objective of this thesis was to create a graphic profile for Stjørdal Tannhelsesenter that could serve as a base for a brand work in the future. It was important to analyze how the clinic wants to be perceived and how it is perceived today. The methods used to carry out this study were questionnaires, researches and a focus group.The work resulted in the generation of a graphic profile that included a new logo, colours, decorative elements, fonts, templates for stationery, business card / badge, imagery, and examples of some publications.According to the test which was made to examine the results of the project showed that I was successful and that the new design meets all the requests from the previous questionnaires..

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.