The storm Gudrun January 8-9 2005 felled about 70 millions cubic metres forest in southern Sweden. The majority of the wind damaged forest was spruce (Picea abies). In order to decrease the risk of wind damages in the future other trees species are of interest for forestry in southern Sweden. The purpose of this master thesis was to study if larch were more wind tolerant than spruce. The method was to compare larch, Japanese larch (Larix kaempferi Lamb.), European larch (L.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Grid codes are becoming more demanding on power generating units due to the factthat the complexity of the power grid is increasing. The penetration of wind powerhas grown over the last years and it is clear that wind farms need to be addressedwith the same type of grid codes as conventional generation units. There is howeveran undeniable difference between the technology in conventional synchronousgeneration units, and the asynchronous generation units in wind farms.This thesis has reviewed the current grid code in Sweden and compared it to the newcode proposed by ENTSO-E, ?the Requirements for Generators?, in the aspect ofwind farms with an installed power of 30 MW or more. The comparison has beencomplemented by an analysis of how wind farms of two different technologies(Doubly fed induction generators and full power converters) can meet therequirements and technical proposals have been given on how to be able to meetcompliance with the new grid codes.The Requirements for Generators contains many non-exhaustive and optionalrequirements, because of this it has been difficult to, at this stage, exactly point outthe technical impact on the grid connection of future wind farms in Sweden.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

To achieve a sustainable development, three aspects have to take equal place in the society; environmental, economical and social. To reduce the impact on the environment and the amount of greenhouse gases supplied to the atmosphere, industrialized countries and less developed countries must start cooperating. Also the use of renewable energy sources, like solar, hydro and wind power, have to increase.Wind power has great potential as a future energy supply. It is cost efficient, quickly developed and the resource is abundant and available worldwide.Examinations made in Sweden, indicates that there are difficulties establishing wind power at the same pace as the environmental goals, set by the Swedish government, requires. Mainly because people living nearby potential areas for wind power farms, appeal against the decision.This study aims to investigate differences between how people in Sweden and Brazil look at wind power as a future energy source and at the establishing process.

Flow measurement is one of the greatest challenges in order to calculate efficiency in hydropower. Most hydropower plants in Sweden use differential pressure methods for flow measurement. These methods are dependent on constant conditions in the waterways. A change in these conditions, like turbine improvements, prevents differential pressure methods to verify efficiency improvements. Since efficiency improvements can?t be verified by one measurement system, another method, which isn?t affected by changing conditions, can be used.

The student project Elba at KTH started in 2011 and is a project where a battery driven prototype car is developed. The vehicle competes in Eco Shell Marathon in Rotterdam, Holland. In this competition the vehicle that travels a certain distance including several starts and stops with the lowest energy consumption wins. To minimize the consumption is therefore very important, which requires knowledge of the vehicles energy losses.A vehicle's energy losses depends on several factors and can be divided into the powertrain efficiency and the driving resistance. The driving resistance can then be divided in to rolling and air resistance, if smaller losses like vibrations are ignored.

The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

This thesis analyzes the expected profitability in land based wind power plants. The expected profitability is calculated on the basis of a wind power project in Vartofta, Falköping. The information required to calculate the expected outcome is then concentrated to this project, which is in this thesis called project Näs. In project Näs they plan to build three wind power plants, with each an effect of 2 MWh. These wind power plants are very capital intensive investments with a long and uncertain payback time.

Wind power is a growing energy sector in Sweden. However, it still represents only a small part of the total electricity production, about 0.7%. In order to create good conditions and to facilitate the establishment of wind power in Sweden, the government has for example, created a national centre for wind use. The objective has been to reach the governmental goal, which is an expansion of wind power by 10 TWh by year 2015 compared to the level in 2002. The Swedish electricity market was deregulated in 1996 which refers to the introduction of a competitive market in electricity production and trade.

The dependency of fossil fuels has to decrease in order to reduce emissions of green house gases. Wind turbines generate electricity with low environmental impact, but the local opinion in Sweden is sometimes an obstacle to new developments. The acceptance of nuclear power increases at the same time. Mining uranium is once again on the agenda and prospectors are currently drilling for uranium. This cross-sectional study deals with acceptance of wind farms and uranium drilling.

The first commercially produced wind turbines in Sweden are starting to reach theend of their lifetime after approximately 25 years of producing energy. The cost fordismantling the turbines, according to Ardefors et al. (2009), is calculated to be 1-2 %of the total investment of the wind turbines. The purpose of this master thesis is tomap the dismantling process of wind turbines in Sweden and try to find a sustainablesolution for the future.To make sure that a correct dismantling process takes place, and that the financialaspect is covered, a proposal for a financial guarantee is worked upon. A nationalunanimity will be created through a financial guarantee and the risk will be minimalof a third party getting afflicted.Studies of literature and interviews have been carried out.

Ribs from sheep, goat and pig are rarely assessed  to species due to the fact that they are very similar in their morphology and size. The ribs are instead considered unidentifiable although it is possible to see what kind of bone it is. If these ribs would be identified to species not only would species assessment degree of archaeological source material   increase, the relationship between meat-rich and meat poor regions would change.To find out whether there are morphologically measurable differences between sheep, goat and pig ribs, three measurement points on each rib has been defined and measured. At each measurement point two measurements were measured, one medial-lateral measurement and one cranial-caudal measurement. The ratio between the medial- lateral measurement and the cranial-caudal measurement was calculated for each point.

ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other methods than those available today, and particularly, I consider how these methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

Wind damages next to strip roads in 1st and 2nd thinning in Boxholm, Östergötland Anneli Fransson, SLU, inst f sydsvensk skogsvetenskap, Examensarbete no 108 Wind damage is something we are all familiar with since the storms Gudrun (2005) and Per (2007). Research about strip roads and wind damage is very limited. It is commonly known that the trees next to the strip roads more often fall whit heavy winds, and the purpose of this thesis was to verify this statement. Data was collected from first- and second thinnings at Boxholms Skogar AB, Östergötland. In first thinnings data was collected from both spruce and pine stands and second thinnings only data from spruce stands was collected.