Heat and power stations are often in need of optimizations. A simulation model is a tool for findingways to optimize the plant. The scope of this diploma work is to develop a simulation model ofBoiler 5 at Mälarenergi AB. Boiler 5 is a circulated fluidized bed boiler that was taken into service inyear 2001. Among the included parts in the boiler are cyclone, convection part andINTREX-chambers.

The project was carried out in cooperation with the department of product development IOS at IKEA. The work included improvements of a new existing product that Ikea soon will release on the market, Observatör, a wall bracket for flat screens. The product is supposed to fulfil the needs within this market for IKEA. However, since Ikea was not satisfied with it, our work was to carry out the improvements that were specified in the beginning of the project. Another task in the project was to develop a side-product that is supposed to be used together with Obeservatör for storage of DVD/decoders.The project included labour as problem definition to final technical drawings and a prototype.

When a municipality is about to realize an IT investment, e.g. an economy system, theywill need to do procurement according to the laws of procurements. To perform suchprocurement takes time and energy from the everyday work at the municipalities, andtherefore they want to make a quick and efficient procurement. Unfortunately it showsthat municipalities do not always make an assessment that is sufficient enough for theirneeds, which can result in an inefficient system in a longer perspective. Municipalitiesthink more often about the hard values such as costs of the investments, and not alwaysas much when it comes to the soft values, like the user-friendliness.

The purpose of this thesis is to examine and analyze how to improve the design of a Microsoft Surface SUR40 application. The application in focus was an interactive product browser developed by the company Spree, our external client. Spree is a multi-touch software provider, established in September 2010 and they expressed a need for suggestions for how to improve this application. Our work aimed at revealing how to make the application more suitable for several users and make it easier for them to interact simultaneously on the surface. From a qualitative standpoint we have examined how 17 users experienced the application.

This report is a bachelor thesis work within the field of Product Development and is also an assignment for Thule Sweden. The work has been performed by Niclas Tjäderborn and Christian Holm, students at the Mechanical Engineering Program with major in Product Development and Industrial Design at Jönköping School of Engineering during spring the semester of 2009.The thesis work concerned the development of a new wheel holder for bike carrier for Thule Sweden. The background to the project was that the initiator wanted a more user friendly wheel holder with better design than those available on the market. The wheel holder is able to be implemented on one or several of Thule?s current wheel holders.

 This bachelor?s thesis purpose is to examine how library staff experiences the meeting with non-Swedish speaking users of public libraries, and how they solve different situations. Today there is not much research on this subject but we find these questions important to study because we think it is good to be aware of the situations that can arise and discuss how to solve any problems. To have a basis for this qualitative study we conducted group interviews with library staff, where they are asked about their experiences with non-Swedish speaking users. In the analysis the results of the interviews are compared to previous research and related to communication theory, which is the theoretical framework for this study.

The aim of this Masters thesis is to investigate how trained social workers experience information in their daily work. The thesis focussed on three major questions: - What type of information and information sources are mostly used by the trained social workers? - What kind of information barriers are described by the participants? - How can the patterns of information seeking and information use be understood on the basis of the trained social workers professional and social context? Semi-structured interviews were carried out with trained social workers working with child welfare enquiries. My theoretical framework consists of user and context oriented theories about classifications of information, information barriers and models of information sources. My conclusions are that trained social workers working with risk assessment in child protection services, need to use different kinds of information in their daily work, such as problem information, domain information and problem-solving information.

Minimizing power consumption is a critical part of many embedded design projects. Thechallenge is to limit the power consumption of the system and at the same time providesatisfactory service to the user. With regards to microprocessors, the main way of limiting powerconsumption during program execution is to adjust the frequency and the voltage at which theprocessor operates.To enable the implementation of real-time scheduling with support for dynamic voltage andfrequency scaling, an exhaustive study of the Freescale i.MX31 embedded microprocessor isperformed. Specifically, the power consumption relationship to all relevant frequency andvoltage settings is investigated. In addition, to enable frequency and voltage scaling in a real-timeenvironment, a complete timing analysis of proposed voltage and frequency scaling methods isperformed and their suitability for use in real-time systems is evaluated.To integrate voltage and frequency scaling capability into OSE RTOS, a software module hasbeen developed for this operating system.

This study has been carried out in cooperation with Unilever and partly with the EC founded project, Smartdoc IST-2000-28137. In areas of statistics and image processing, both the amount of data and the dimensions are increasing rapidly and an interactive visualization tool that lets the user perform real-time analysis can save valuable time. Real-time cropping and drill-down considerably facilitate the analysis process and yield more accurate decisions. In the Smartdoc project, there has been a request for a component used for smart filtering in multidimensional data sets. As the Smartdoc project aims to develop smart, interactive components to be used on low-end systems, the implementation of the self-organizing map algorithm proposes which dimensions to visualize.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

The purpose of this Master thesis is to investigate how the relation between users and librarians is affected by higher education librarians? talk about information literacy. The thesis uses Norman Fairclough?s critical discourse analysis in analysing four articles written by Swedish higher education librarians and in answering how information literacy, users and librarians are constituted. The analysis indicate that the questions have no distinct answers, there are discrepancies between, as well as within the texts.

The purpose of this Bachelor's thesis is to study the reasoning behind classification, cataloging and shelf arrangement of nonfiction graphic novels in public libraries. The aim was to examine which aspects of accessibility influence in which collection nonfiction graphic novels are placed.With qualitative semi-structured interviews we learned how six librarians motivated their choices concerning nonfiction graphic novels. We also interviewed a cataloger from Bibliotekstjänst to examine how nonfiction graphic novels are classified. In our analysis we compared our results to theories and practices concerning alternative shelf arrangements in libraries and legitimization of graphic novels. We found three types of shelf arrangements for nonfiction graphic novels: graphic novel shelf, nonfiction classification code and a mix of the two.

Examensarbetet syftar till att jämföra nya alternativ till olika system för användning i laborationer i reglerteknikkurser för olika studentkategorier. Det skall utredas vilket av ett antal alternativ till mjukvaruplattformar som är bäst lämpat att användas vid reglerteknikundervisningen i ITN:s reglerlaboratorium vid Linköpings universitet. Tidigare laborationer i berörda kurser skall även modifieras så att dessa kan genomföras i de nya systemen.Examensarbetet resulterade i en rad modifierade laborationer och system att tillämpa i dessa. De nya systemen medför att all reglering sköts direkt från en dator istället för tidigare variant med externa apparater som programmeras. På så sätt kan större fokus läggas på regleringen i sig och inte de system som tillämpas för att utföra den..

The aim for the project was to develop a risk analyse tool for measuring the fire safety level in Cultural Heritage buildings of Visby, Gotland. In 1995 Visby were taken into the Unesco:s World Heritage List with the explanation ?Visby is an outstanding example of a Northern European walled Hanseatic town which has in a unique way preserved its townscape and its extremely valuable buildings? One of the demands for the tool was that it should be easy to use and result into a ranking level in examined buildings. The user of the tool is recommended to be personnel in the fire department. To develop the tool a Multi Attribute Decision Making (MADM) method was used.

This report is the outcome of an exam work made in interaction design, bachelor degree, at the School of Arts and Communication, Malmö University. Working in collaboration with the childhood obesity unit, Region Skåne, our aim was to fulfill their request of a web based application preparing the children for treatment at their facility. Furthermore the application intends to give the children knowledge concerning obesity as well as teaching them how to obtain a healthier lifestyle in terms of provision and activities. The application concerns children in different ages and therefore different stages of their learning abilities. Our conclusions are that they need to be challenged and obtain feedback in different ways to get motivated.