The construction of buildings and paved surfaces changes the natural water balance.Precipitation generates surface runoff and storm water instead of infiltrating into the soil.Storm water has come to be considered as a major source of pollution in lakes and streams inthe vicinity of urban areas. Reduction of pollutants in storm water is a key action in order toprotect sensitive recipients and maintain high water quality. Storm water is traditionallytransported by storm sewers to the nearest recipient. In recent years the approach to stormwater management has changed; storm water should primarily be disposed of on site, throughlocal disposal of storm water, LOD. LOD is created by a combination of the function ofseveral smaller local facilities and the general sewer system.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

The construction of buildings and paved surfaces changes the natural water balance.Precipitation generates surface runoff and storm water instead of infiltrating into the soil.Storm water has come to be considered as a major source of pollution in lakes and streams inthe vicinity of urban areas. Reduction of pollutants in storm water is a key action in order toprotect sensitive recipients and maintain high water quality. Storm water is traditionallytransported by storm sewers to the nearest recipient. In recent years the approach to stormwater management has changed; storm water should primarily be disposed of on site, throughlocal disposal of storm water, LOD. LOD is created by a combination of the function ofseveral smaller local facilities and the general sewer system.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

Den ökande inflyttningen till städer ställer oss inför ett oundvikligt ställningstagande angående hållbar stadsutveckling. Städernas förtätning minskar grönområdena vilket gett vissa urbana miljöproblem, exempelvis översvämningar, lokala temperaturhöjningar och försämrad luftkvalitet. Ett sätt att förebygga dessa problem är att återställa de förlorade grönytorna genom att bygga gröna tak. I Sverige har utvecklingen av gröna tak pågått i ungefär 20 år, med störst fokus på de miljömässiga positiva egenskaper de besitter. Det här arbetet handlar om gröna tak i Melbourne, Australien och fokuserar, genom bland annat intervjuer, på vilka sorts tak som byggts, när, hur och varför. Det finns tre olika typer av gröna tak; extensiva, semi-intensiva och intensiva.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

The building sector accounted for around a fourth of the total energy usage in Sweden in year 2010 (Energimyndigheten, 2012). Therefore it has become very interesting to achieve a lower energy usage in residential buildings. One way to achieve that is to build so called passive houses. By being very well insulated and have low leakage through the walls, they can reduce the energy usage for heating with a substantial amount. The first passive house was built during the 90?s in Germany; and in Sweden the first passive house was built in Gothenburg 2001.

There is two dairy farms in Sweden with ability to be opened on both long sides, one outside Hjo and the other one, Brandstadholm, north of Sjöbo. When there is no measures and results or not enough literature about natural ventilation and especially on this kind of air inlet, makes my tests very interesting not only on Alnarp, but among other companies. I would like to find out if there is any air movements direct on the cows, how high/low temperature, air humidity, light intensity and noise standard inside the barn. Does Brandstadholm fulfil the rules and regulations when it comes to climate inside the barn? Could this system become the new dairy barn instead of the conventional barns in Sweden? I am going to focus on the animals environment, after all they are the one who is going to spend the most of the time in the barn. I used five electrical loggers distributed inside the barn to measure the temperature and one of the loggers measured the air humidity, every 15th minute. One logger were placed on the outside which measured both temperature and air humidity.

International Marine Group, IMG AB, was established in year 2000, and became the parent company of the three sister companies, Momec AB, Isolamin AB and Premec AB. The IMG ? group supplies complete marine/offshore interior accommodation and tailor-made system supplies to the Building/Industrial sector. With a starting point to develop IMG AB?s logistic and distribution the company has decided to survey the present logistic at their subsidiaries, mainly concentrated on the goods for delivery.

Expansion och förtätning av städer leder till att såväl areal som andel hårdgjord yta ökar i våra stadsmiljöer. Detta genererar en ökad dagvattenavrinning eftersom regnvattnet inte har samma möjlighet att infiltrera i naturmarker och grönområden. Den ökade mängden dagvatten riskerar att orsaka problem i områden där ledningsnätet dimensionerats för de dagvattenmängder som tidigare varit aktuella. Att utöka ledningsnätets kapacitet är ofta mycket kostsamt och det är därför önskvärt att istället minska belastningen på de befintliga systemen. En allt vanligare metod för detta är att byggnaders takyta bekläds med växter, så kallade gröna tak.

During the summer of 2005 a number of steer producers in Skåne, Sweden, found that their animals graded less favourable according to the EUROP carcass grading system when slaughtered, than ordinary. The aim with this project was to determine factors that affects the production result in steer production and to find the reason to the lower classification. The project was initiated by Anita Persson, LRF, Skåne and was preformed with supervision from Ingemar Olsson, SLU, and Jens Fjelkner, Skånesemin. Ten producers of dairy steers located in Skåne was chosen for this study. The producers were interviewed to collect information about their steer production with respect to their planning and results.

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

SUMMARY Several studies have shown that weaning pigs are in great need of heat. The reason for this is mainly because the pigs are given very little feed just after weaning. Some of the pig producers of today have tried to get along with these problems by building some kind of hut for the pigs. Some of these pig houses have been included in this study.The study has shown shortcoming functions for the pig cottage. The expected heat increase has not occurred.