This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

A wastewater treatment plant has the task to refine the wastewater from substances that should not be released into the environment. The decomposition process can, in a simple way, be described as follows: micro-organisms breathe oxygen and eat unwanted substances. The environment in which the micro-organism lives is known as sludge and the correct amount of oxygen available in the sludge is important for the decomposition to be effective. The oxygenation of the sludge alone stands for about 30% of the plant?s energy consumption.

This project concentrates on musicians who work in a professional music studio.The task of this project was to design a new headphone system called Foldback system.The advantage of this system is that all involved in a music project could influence their ownlistening during the project. With a couple of adjustments should each and everyone get theirown individual listening from their headphone station.This report shows different methods, theories and results that came along in development ofFoldback system. The project has resulted in a finished product that will be in use atStudiomega..

Background Anesthesia-related deaths are common in dogs, especially in the postoperative period, in compare to humans. This study aims to describe and elucidate the qualities of the postoperative care for dogs in Sweden. Method To investigate the postoperative care, a qualitative study was made by interviewing personnel in the animal health care sector. The primary information from the interviews was analyzed in a qualitative manor and a few distinguished qualities came forth. Results These qualities describe the postoperative care and include preventive activities, postoperative activities, monitoring and communication. A variation in regards to the results was seen between the interviewed.

The author of this report has created a Web-based invoice system and CRM at therequest of the company Webhouse.se. The purpose of the System is to makeeveryday tasks in the company easier. The system also needed to prevent mistakesand errors by managing orders and invoices.The system has been created with the company?s requests in focus. During thedevelopment of the system information security and interaction design have beenimportant aspects that have been taken into consideration.The system has been created using techniques such as PHP and MYSQL.

Individual identification of pigs could be used in commercial herds for production monitoring, disease monitoring and breeding evaluation. This study investigates the possibility of using microchips designed for dogs and cats to identify individual pigs from birth, through rearing to carcass at the slaughter plant. Two different sizes of microchips, and two different ages of the pigs at injection were tested. Castrates and gilts from ten litters were evenly distributed between chip sizes and injection ages. All pigs were identity marked with both electronic ear tags and injected with microchips.

In order to reduce the price for, and improve the performance of automatic control systems for magnetization of synchronus generators, the possibilities of using a PC based software PLC system, Programmable Logic Controller, has been investigated. The result is a system based on the CoDeSys software PLC with runtime environment from 3S-Software, communicating with external units via Modbus fieldbus. System price is reduced from ?5000 to ?2000 and system processing speed is reduced from 10 ms for a Siemens S7 PLC to 4 ms with the CoDeSys PLC system though unsolved problems with runtime seizure caused by improper settings in the PC BIOS..

In this thesis a transport system is sought after thatif realised in the city of Uppsala could provide bothwell-being to all its inhabitants and sustainability,here jointly refered to as liveability. It is found thatthe car dominated transport system that is inoperation today provides two fundamental values,namely accessibility in both time and space, whichsets it apart from other transport solutions. Thesetwo values are of immense importance for theliveability in our modern world. On the other handthe car dominated system decreases the liveabilityof Uppsala in several different ways. Some of theseproblems, it is argued, could be solved within thecar system, through the adoption of moreenvironmentally friendly cars etc., but otherproblems are inherent in the car system and willremain no matter what changes are made.

Because of increasing demand of power on Malmbanan the capacity of the existing wires which supply the trains must be increased. This increases the stress on the existing poles and for this reason the system for supplying the loads along the railway is to be removed from the poles and be replaced by some other system. This thesis is a study on a two-level low voltage (1 kV and 0.4 kV) electrical system with the aim to investigate if it can be an alternative to the system used today taking into account the voltages, fault currents and costs.In this thesis the following tasks have been performed:? Gathering of data? Description of basic theory? Loadow and fault current calculations of the system with MATLAB? Life Cycle Cost estimate of the system? Analysis and conclusions from the resultsThe results show that the new system can be an alternative to replace today's system. The simulations and calculations show that the voltage drop is at an acceptable level and that the fault currents are large enough to supply a safe disconnection if a fault occurs at the far end of the system..

Uppsatsens syfte är att ta reda på hur TV4:s lokala nyhetsstationer skiljer sig runt om i landet. Jag har studerat TV4 Malmö, TV4 Göteborg, TV Luleå, TV4 Stockholm och TV4 Karlstad. Frågeställningen har varit: Hur skiljer sig TV4 Nyheternas lokala nyhetssändningar ifrån varandra i form av bildspråk, struktur, val av nyheter, intervjupersoner och programledare? Metoden som har legat till grund för min uppsats är Television monitoring guide. Jag har tittat på fyra olika sändningar på respektive nyhetsstation på TV4:s hemsida och antecknat fakta utifrån Television monitoring guide.

The management of information is a significant competitiveness in companies. Companies stored and save information every day, and it is very common to save de information in different sources. This makes de management of information complex. To mange, monitor and analyze the information, companies can use a system called Business Intelligence. BI system is an analytical system that extracts and converts data into useful information that helps employees to make informed decisions.

During the last years, producers and consumers have become increasingly aware of food safety. Foodborne illness and foodborne injury are in best case unpleasant but they can also be fatal. HACCP (Hazard Analysis Critical Control Point) is a preventative food safety system which is aimed to guarantee production of safe food free from pathogens, foreign materials and substances with potential to cause adverse health effect. In order to succeed in developing, installing, monitoring and verifying a HACCP system, there is a mix of hurdles for the company to overcome. While larger food companies meet a difficult challenge, small and medium size enterprises often feel that the hurdles are almost impossible to manage.

This paper discuss the possibilities to improve the Swedish political nomination system. It brings up some of the values and norms that can be used to change the existing system. Values as openness, the demand of responsibility and also if there is values from the American spoils system that can be used in the Swedish system. A minor purpose is to discuss the part of the parliament within the nomination process. To investigate this I have some theoretical starting points and a self constructed analysis tool.

Jämtkraft AB has recently modernized its hydropower station at Hissmofors by replacing four older worn out units with two new units. The generators uses a concept with sliding stator feet to deal with the thermal movements that occur in the stator during operation when the unit is operating intermittently. At other sites, this method revealed shortcomings in the reliability. This has made Jämtkraft AB feel uncertainty about its function and therefore want to investigate it during an early stage. The generators have a built-in monitoring system for the sliding stator feet and by using data from there the function of the sliding stator feet has been investigated. The study focused on how the different stator feet move relative to each other and how the eccentricity and deviation from roundness changed during operation. The results show that there are several indications that the function of the sliding stator feet is not satisfactory.

Human-computer interaction is central for computer assisted development. The aim was to investigate the user experience of a new (U2) compared to an old (U1) computer system, within a cognitive psychology frame of reference. Six subjects, frequently using the system, participated in the study. It was shown that the new (U2) compared to the old system (U1) enhanced and supported more the users? system related procedures/tasks.