Hydropower is the largest renewable energy source available in today's society. Operation and production is handled by high-tech electronics. This thesis is done on behalf of Statkraft Sweden AB who wants to explore the possibility of replacing the hydraulic cylinder with an electric actuator, generally as well as a case of a small power station on the river Nissan. Whether it is the chaplain or francis turbine vanes are actuated by hydraulic cylinders. Because of Gustavsberg hydropower is inconstant operation, this report is based on power calculations, which are read and computed according to the available hydraulic diagram.

The perioperative nurse's primary responsibility is to care for the patient during the operation?s three phases; before, during and after. The communication between colleagues in the surgical department is increasing opportunities for safe care for the patient and a good dialogue with the patient can alleviate the concerns facing the unknown environment such as an operating theater. The pilot study was to investigate the surgical nurses' perceptions of conversations with the patient one year after graduation. To answer the pilot study's aim a qualitative interview study was chosen with a phenomenographic approach.

The aims of the practical work carried out for this thesis were to redesign a clinical decision support system for thoracic surgeons, called AssistMe, and to evaluate the concept behind this system. The main objective of the thesis is to give an account of the considerations that were found to be of key importance for designing a clinical decision support system for thoracic surgery. Another aim was to let future users test the system after it had been redesigned and evaluate the concept behind it. The thesis also investigates users? experience of the system and their views on whether it would be applicable in their daily work practice.

Background: As companies are operating in more globally and complex environments, the need for risk control is accelerating. In an ever-changing environment, companies cannot merely focus on traditional risks, which include financial and insurable risks. To maintain competitiveness, companies need to extend their risk management to include all risks, traditional as well as operational and strategic risks. Purpose: The purpose is to describe and position risk management for Telecom operators, in comparison with the risk management literature, with regards to structure, processes, learning process, visions and benefits. In addition, our aim is to link risk management perspectives with the different strategies for knowledge management.

The aim of this thesis is to investigate the opportunities of classification of web pages. Two classification systems are compared; a library classification system traditional and a system that is developed for use on the web new. UDC is chosen to represent the traditional systems, and Yahoo! represents a so called new system. UDC is used by NISS Directory of networked resources, which is a directory that uses the system for organisation of electronic resources. Both systems are analysed from two different perspectives, a multidisciplinary and a timeperspective.

The client, Senselogic, had noticed an increased demand for an e-commerce system integrated into its product, SiteVision, something that did not previously exist. Senselogic wanted to integrate a third-party system to manage e-commerce. The problem was that there were very many e-commerce solutions to choose from. In order to select the best system it was necessary to evaluate the e-commerce systems and compare them to each other. To identify the elements that has to be included in an e-commerce system a study of literature was conducted.

In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

Ett ERP-system syftar till att ta hand om företagets resurser och skapa ett enhetligt integrerat system för dessa. ERP-system kan också användas för informationsutbyte mellan företaget, kunden och leverantörens system. Behov av ERP-system finns inom de flesta branscher oavsett storlek och inriktning men kritik har riktats mot att systemen inte lever upp till användarnas förväntningar eller tillfredställer användarens behov. Arbetets fokus ligger koncentrerat på hur mindre företags uppfattning om ERP-system är och vad som krävs av en ERP-leverantör för att i framtiden tillfredställa mindre företag. En surveyundersökning har använts för att få fram relevant information för att lösa min problemprecisering.

This report describes a study, description and testing of parts to an application adapted to the operating system Android. The application is supposed to measure the distance to a car ahead. Apart from distance measurements the ability of the application to calculate its own speed with the help of GPS is tested. From these two parameters, speed, distance and some constants the theoretical stopping distance of the car will be calculated in order to warn the driver if the car is too close to the car ahead in relation to its own speed and stopping distance.Tests were conducted on the different applications that were programmed and the result showed that the camera technique in the mobile phone itself limits the maximum distance of the distance measurement application. The max distance the tests in this thesis revealed was approximately 5 meters.

This study will shed light on the subject of system management and system management models. It is important that everyone within an administrative organization understand business objectives and needs of the users who work with the systems. It is vital for the activity to form a structured approach for its management, which includes a system management model. Every company has its individual system management model that is tailored to support their management of a business IT systems. According to Brandt (2000), a system management system model is defined as "an idealized image of how you want the system management work is conducted".

S2 CRM is a Customer Relations Management system built in classic ASP that runs on a web server servicing customers with varying needs. The purpose of this thesis work is to convert parts of the system to the web development environment ASP.NET. The purpose is also to gain knowledge of the framework itself. The ASP.NET environment is compared with another framework, JBoss Seam, in order to understand the differences and to evaluate the possibility of using another framework than ASP.NET, when building the new system. The outcome of this comparison is that although JBoss Seam is just as good, and in some aspects better than ASP.NET, the use of ASP.NET simplifies the continuation of development on the S2 CRM product.

This Thesis aims to explore how to integrate an IT-system for facilitating anorganizations work with Continous Impprovements.This is done here by examining and analyzing the process within a handful ofcompanies who seem to have been successful with their own implementations. Thestudy is focused on the implementation of one particular system, "System C2".Simliarities and differences between the companies, and the established rule of thumbfor these kind of activities are focused upon. This to emphasis how another actormight emulate some of the apparent success.Part of the core question is found in the title, since Continous Improvement is oftenseen as a relativly low-risk activity, is it then also possible to take a low-risk slow pathto the implementation of such a system in the entire organization?.

An increasingly globalized market is leading to hard competition among manufacturing companies, which means that they are forced to become more customer focused to survive in the market. A Customer Relationship Management system is a system that will be of assistance to help companies succeed in building long term relationships with their customers. Best of Breed and ERP-based are two types of CRM systems. The study has focused on analyzing and examine the need for CRM systems at manufacturing companies. Our question formulation has been:? What need do businesses want to satisfy with a Best of Breed-based and ERP-based CRM system?? Are there any differences in the use of Best of Breed-based and ERP-based CRM system?In this study, we have chosen to carry out interviews and quantitative surveys with manufacturing companies to get their view of CRM-systems.

This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.

Today we live in a world where the demands increase in the aeronautics industry. This creates a situation where no mistakes are allowed about the regulations and for those who are supposed to follow these. Safety comes first, tracking of components, Service Bulletins which are recommendations from the manufactures and Airworthiness Directives which are demands from the authorities, these need to be updated at all time and everything that is done on a aircraft need to be documented.This creates a situation where today maintenance shops need to have full control of all parts of the organization, which creates a need for a working data system.The goal with this exam work is to evaluate the best way to implicate the new bought data system called "System Aircraft Management" on the basis of the needs of Täby Air Maintenance AB. The system are supposed to get started technically and also be implicated to the users of the system. This work will be focused to create a effective working plan to get SAM implicated with no interruption in the daily work.