Ethiopia is the country with most livestock per capita on the continent of Africa. There are 34.5 million cattle that are used for drought, meat- and milkproduction and 85% of the population rely on agriculture for their survival in some way. Milk is produced in four main systems, through pastoralism in the lowlands, in mixed crop-livestock systems in the highlands, in and near big cities with only one or two cows, and in intensive farming systems. There are 17 cattle breeds in Ethiopia and some of them are more suitable for milk production than others. Several environmental and economic problems arise from livestock holding in the country, for example overgrazing, low production due to feed shortage, low quality of the avaible feed and non-existing breeding programs.

AbstractAimThe aim of the pilot study was to compare short- and long-term effects from group exercise in water with land-based exercise on pain at rest and pain with movement, along with the effects on function in daily life and practice of sports and leisure activities in patients with knee osteoarthritis. The aims were: Is there a difference in short- and long-term effects on pain intensity at rest and pain with movement after exercise in water or land in patients with knee osteoarthritis? Is there a correlation between the degree of pain intensity at rest and with movement, respectively and long-term effects from the two different exercises on function in daily life and practice of sports and leisure? MethodThe study was a randomized intervention study without a control group. Twenty patients with radiographic knee osteoarthritis were under a total of eight weeks treated with either land- or water-based exercise lead by a physiotherapist. The patients rated pain intensity at rest and with movement on a numerical rating scale (NRS) before and after the first training session, before and after the eighth training session, before and after the fifteenth training session and before the last and sixteenth training session.

In 1994 the EU directive of packaging waste was adopted. The result was that all EU member states developed different systems to manage packaging waste and recycling. This paper examines the various systems and the factors that affect the level of recycling. This is done by a cross-sectional study between countries. The results of my study suggest that take-back system generates less recycling than other systems, the mandatory deposit system can affect the recycling in a positive way.

Water is vital for all life on earth. But it can also be dangerous, even fatal, if it is polluted water. 60 percent of child mortality can directly be deduced to dirty water. Not only developing countries are affected, even in the western world epidemics are breaking out by partake or bathing in dirty/polluted water.MIP, Molecularly Imprinted Polymers, is a biosensor technology that can provide faster and more reliable response than the current methods of water analysis. It is also cheaper and due to that more samples can be taken and analyzed.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

The purpose of this work is to study a circulation project in Enköping municipality, where the society?s rest products are used to make beneficial products. In Enköping the rest products from waste treatment plants and private sewers are used to fertilize and irrigate Salix plantations that later are harvested and burned at the local combined heating and power plant, ENA Energy AB, to produce electricity and heat. Possibilities to apply this kind of project ona municipality in Russia are also explored.Guryevsk municipality in Kaliningrad region was chosen since there is a need to improve energy systems and reduce emissions to water and air. This municipality strives to become environmentally friendly.

Moisture damage in buildings is a serious issue that leads to problematic consequences and high economic costs. Despite the knowledge and awareness existing about moisture problems, extensive damager still occurs today. Studies of moisture in the exterior wall constructions shows that the issue if often caused by rain and water intrusion. These kinds of problem result in major costs usually because the companies have to replace the material and structural components and also in some cases tear down large parts of the buildings.The work includes moisture theory and descriptions of four different exterior wall constructions, wood stud wall with plastered facade, exterior wall with wood facade, exterior wall with concrete, and exterior wall with brick facade. Our thesis work describes how the constructions are affected and moisture damage due to water intrusion.

This degree project studied surface waters on Kåbo Golf Course in Uppsala, Sweden, with the aim of determining the status of the water and how it is affected by the activities of the golf club, and to obtain suggestions of measures to create better conditions for the water environment on and around the golf course. The project forms part of the environmental protection work of Kåbo Golf Club, which is working towards achieving environmental certification from the Swedish Golf Association (SGF). The study is based on literature studies and quantitative and qualitative field studies of water on the golf course, with the focus on environmental factors identified as being important for the golf industry and on strategic environmental goals developed by SGF. The number of open water bodies in the Swedish landscape has substantially declined during the past 200 years, so it is important to save those that remain. This study showed that the surface water at Kåbo Golf Course is an important element in the surroundings since the area contains few wetlands, which can be a habitat for large numbers of species. The stream and ponds on Kåbo Golf Course also have the important function of serving as water hazards in the game and adding difficulty and variety to the course. Since Kåbo Golf Club wants its surface waters to look aesthetically appealing, extensive algal growth and drying up of ponds during parts of the year are regarded as problems.

The biogas plant Kungsängens gård, owned by Uppsala Vatten och Avfall AB, produces biogas and biomanure from organic household waste, food processing waste and slaughterhouse waste. In year 2012, 4.4 million Nm3 of biogas were produced from 25 200 tons of waste. Before digestion all substrate is sanitized by one hour?s pasteurization at 70°C in order to kill pathogens. Another method, integrated thermophilic sanitation (ITS), is of interest in order to decrease the energy demand.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Electronic article surveillance (EAS) is widely used in shops and libraries together with an RF-tag attached to the goods or books in order to prevent shoplifting. By implementing the addition of a moisture sensor to the RF-tag, other functions become possible, including the ability to use as an alarm with regards to frozen goods, which have been shipped but which have melted and have, subsequently, refrozen. In- relation to care for the elderly, one time-consuming step involves checking whether there is the necessity for a change of diaper and this can, instead, be based on an RF-tag with an EAS-system alarm. A preliminary investigation was made using the moisture sensors, which involved how the resistance changes when liquid and/or heat is applied. A simulation of the LCCR circuit (RF-tag with the sensor) was conducted in order to determine how the resonance frequency changes for different resistances levels.

The Swedish industrial society has left several areas with contaminated soil and water which today is of danger for the environment and human health. One of these areas with contaminated soil and water is the region where the former Glava glassworks operated during 1859 to 1939. The main object in this study has been to study the responsibility for the contaminations according to the Environmental Code. The method used is a qualitative content analysis of relevant literature to answer the following questions:What types of contaminations can be found in the area of Glava glasswork and what health issues can these cause?What kind of activity has been conducted in the area that have caused the contaminations in soil and water?According to law, what are the responsibilities for the contaminations in soil and water at Glava glassworks?The contamination in the region has been confirmed to originate from the glasswork due to the environmental engineering survey made in the area in 2009.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.