Water is our most important provision and its quality is above all dependent on the geological conditions in the area from where it is extracted. Due to geological properties there are certain areas with an elevated risk of high uranium levels in the ground water, which in turn constitutes a risk for human health. Consumption of water that contains a high concentration of uranium implies a health risk due to the chemical characteristics of uranium. Livsmedelsverket (The National Food Administration) and Socialstyrelsen (The National Board of Health and Welfare) therefore recommend that precautionary measures should be taken when the uranium concentration in ground water exceeds 15 micrograms per litre. In particular, drinking water collected from wells in areas with uranium-rich bedrock may have a harmfully high level of uranium. One of the wells of the Ärla water purification plant, located near Eskilstuna, Sweden, contains water that exceeds the guideline of 15 micrograms per litre. One interesting technique for removing uranium from drinking water is adsorption to reactive filter materials.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

The phenomenon of social gaming is essentially an IT-service that people worldwideuses on a daily basis. This particular market is also young and generates tremendousamounts of data, which, from a data managing perspective, makes it naturallyinteresting. Throughout this thesis the social gaming market is described from the datamanaging and different actors perspectives. This is done by using literature reviewing,interviews with companies and analysis based on that information. The thesis initiallypresents important and central terms as well as different techniques.

This thesis considers the use of an oldrock cavern as thermal energy storage.With a large system of differentchillers a model was created to find anappropriate future system. There aremainly two trajectories to take. Eitheran installation of chillers needs to bemade or the rock cavern can be used tomeet the future demand of districtcooling in Solna, Sweden. Additionallythis thesis investigates the possibleuse of different techniques to utilizethe phase change energy of water.Simulation shows that it?s possible toutilize the phase-change energy of afluid; however it?s not economicallyfeasible due to the thermodynamiceffects on the Carnot cycle.

This study explores Environmental Storytelling techniques and whether these can beused in combination with each other to lead a player through a game scene in aspecific pattern, affect the player?s narrative and exploratory view and explorewhether Self-paced Exploration can be combined with these techniques.It is a qualitative study conducted by six gaming sessions with accompanyinginterviews in which six people get to play one of three versions of the same gamescene. The only differences between the scenes are the different guidance techniquesused. The informants' movement patterns are identified and interviews recorded byaudio, as well as screen recording. The results shows that Environmental Storytellingtechniques can very well be used to control the player's exploration patterns, bothnarratively and navigation purposes and Self-paced Exploration can be utilized to agreater efficiency in combination with these..

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Coconut water and recovery/water-electrolyte balance after physicalexcercise ? A systematic overviewAuthor: Irene Eriksson and Alexandra ÖquistSupervisor: Henriette PhilipsonExaminer: Frode SlindeProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: April 09, 2014Background: During physical exercise, it is common with dehydration, which affectsperformance negatively. To restore the fluid balance it is optimal to drink fluids containingsalt and carbohydrates. In theory, coconut water should be a good recovery drink because oftheir nutrient content.Objective: To evaluate the scientific evidence available, to investigate whether coconut wateris better than water or sports drinks for rehydration after physical exercise.Search strategy: PubMed, Scopus and Cochrane Library have been used in the literarysearch. Keywords used were recovery, fluid balance, fluid therapy, water-electrolyte balance,rehydration, dehydration, hydration, exercise, physical activity, resistance training, activity,sports, training, coconut water in varying combinations, in order to cover as wide area aspossible.

A water treatment unit consisting of two aeration basins, two settling tanks, a residence basinand a horizontal subsurface flow wetland were used to treat wastewater from an eggprocessing factory in Brazil. The aim of this paper was to determine the efficiency of thesystem in reducing nitrogen, phosphorus, BOD5 and TSS (among other parameters) andgetting a further understanding on different kinds of constructed treatment wetlands as well astheir nitrogen and phosphorus removal processes. The wastewater from the factory consistedof process water from manufacturing and water used for cleaning, no stormwater or sewagewater entered the system. Tests were taken three times a month from October 2013 ?til April2014.

Aim: To examine the reaction of extreme preterm infants with regarding to body temperature and transepidermal water loss during skin-to-skin care according to Kangaroo Mother Care (KMC) during the infant?s first week of life. Method: This was a descriptive quantitatively designed study, which was a pilot study within the framework of a larger project. Nine children, with a median gestational age of 24.91 weeks, were examined by measuring body temperature (axilla and skin temperature) as well as transepidermal water loss before, during and after KMC. Results: The study showed that skin temperature tended to rise during KMC, especially for those children who were nursed with KMC for more than 60 minutes.

A computer model based on minimization of the free energy, capable to predict contact angles and spreading transitions between Wenzel and Cassie mode for drops placed on surfaces with different topography were implemented in matlab. Simulations were compared with experiments documented in the literature. These showed that reported transitions between Cassie and Wenzel mode can be explained by minimization of the free energy. In this report, a study on the possibility of constructing water repellent paper surfaces with a combination of treatment with octadecyltrichlorosilane and topography changes, is included..

Title: Besparingar inom Barn- och utbildningsnämnden.Seminar date: 29th of May 2009Course: Degree thesis in Business Administration, bachelor thesisAuthors: Amela Smajlovic and Sten SundfeltAdvisor: Leif HolmbergPurpose: Our purpose is to explain the cost-saving process that many municipality organisations face because of the global financial crisis.Limitations: We have limited our study to the municipality of Landskrona and Kristianstad.Method: Our study has a qualitative approach. By using open interviews we have been able to get an open dialog with our respondents.Theory: We have compared with different theories, such as Rombach?s budget-theory and Wildavsky?s role theory.Empirics: The material is based on interviews and conversations with key figures in different levels of the organisations in Landskrona and Kristianstad.Conclusions: The success of a cost-saving process depends on the engagement, awareness and how inclined to changes the persons in the organisations are. Has everybody the willingness to take responsibility fore the organisation and the changes that the surrounding world claims?.

During installation and operation of a geothermal heat pump system leakage of an antifreezing agent can appear in a borehole and leak out in surrounding groundwater. To guarantee high quality drinking water for generations to come Sweden has dedicated some areas as water protection areas. The local authority gives permits for the installation of heat pump systems within water protection areas. Before giving a permit the local authority makes an evaluation of the risks involved in installation and operation of the system within the area. By keeping a certain distance between the protected object in the area and the heat pump system the risk of polluting the protected object with an anti-freezing agent can be reduced.This thesis makes a comparison between three different methods of calculating an appropriate distance between the protected object and the heat pump system.

The aim of this paper is to explain and compare non-compliance of two EU-directives, ?the quality of bathing water? and ?the working time directive?. This study answers the questions: Why didn?t Sweden implement the directive on bathing water quality and the working time directive correctly? Are the reasons for non-compliance the same or different in the two cases? The paper is designed as a case study and with an explanatory attempt we explain why the two directives weren?t implemented correctly in Sweden. The theoretical approach is based on both general- and EU-specific implementation theories.

According to Barclay (2001), behavioral interviews yield higher quality information, than other interview techniques. This study focused on whether the quality and quantity of information differ between structured interview and behavioral interviewing. Two headhunters held 16 job interviews with the two techniques, 9 behavioral interviews and 7 structured interviews. Both headhunters and candidates have evaluated the interviews quantitatively. Initial and concluding interviews have, as well, been held with the headhunters.  No definitive answers were found in the quantitative analysis, but the qualitative results suggest that behavioral interviews give, because of the headhunters opinions, more and higher quality information.

This study explores the different effects on attitude and behaviour three frequently used advertising techniques have. The techniques compared are social influence and egoistic and altruistic benefit-appeals. The results showed that ads featuring social influence had statistically significant higher mean values regarding attitude towards the ad compared to both the other ads, and significantly higher mean values regarding brand attitude compared to the ad appealing to egoistic motivations. Though, all advertising effectiveness measures used in this study - that is, attitude and intention variables - indicated that social influence was more effective than the other advertising messages. Thus, in accord with earlier studies, it can be stated with confidence that social influence is an effective tool to use in marketing communications..

To introduce a standardized component assortment takes a lot of effort in order to make real cost savings. The rationalization effect itself is important, but perhaps even more important is to state the aim of the standardization efforts in a well-defined way. How can an organization assure that they are working in a proper way? How do they know that their efforts are being interpreted into the whole organization? And, how do they know that the standardization efforts actually save money? Different components differ heavily e.g. in technical complexity and quality issues.