The production of cheese is in continuous development with objectives to in-crease productivity, achieve changes in shelf life and functional properties of the products. One concept in the development is to substitute milk fat with vegetable fats and oils in the manufacture of cheese. The objective of this study was to investigate effects on cheese yield and cheese quality of 4 different semi-hard analogue cheese products produced by substituting milk fat with vegetable fat, each analogue cheese with a specific mixture of vegeta-ble fat. As reference a cheese produced with anhydrous milk fat was used. The yield and recovery of fat and protein were determined by recording the weights of each cheese direct after press and after 20±2 days of storage and analysis of the composition of the cheeses after 20±2 days of storage. The cheese was fur-ther subjected for texture profile analysis in a TA-XT Plus Texture Analyser and analysed with Differential Scanning Calorimetry (DSC) to examine whether the fat behaves similar in the cheese as in pure form in respect to its thermal properties. The cheese yield was not significantly different when using different fats. Differ-ent amounts of water were absorbed during the water cooling.

Denna studie erbjuder en litterär analys av gestaltandet av sexualitet i den amerikanske författaren Rymond Carvers novell "So much water so close to home". Analysen lyfter bland annat fram den obligatoriska heterosexualiteten som den teoretiseras av Adrienne Rich och hur manlig kontroll av kvinnans sexualitet inom den heterosexuella institutionen tar sig uttryck i texten.Utöver det undersöks i analysen vilka principer som kan anses ligga bakom konstrueringen av sexualitet i novellen samt hur dessa tar sig uttryck. Den aspekten av analysen tar avstamp i Judith Butlers teori om diskursivt skapade kön och genus samt den heterosexuella matrisen som utgångspunkt för all sexuell åtrå. .

In hydropower plants it is necessary to always have local power supply. Therefore, the plants are equipped with batteries as stationary back up power. Vattenfall Vattenkraft is using lead acid batteries but has been investigating alternatives to replace them. The aim of this study is to investigate the potential of using Li-ion technology as back up power.The study showed that Li-ion batteries have many qualities. The Li-ion technology will decrease the space and maintenance demand.

So far, only limited research has been carried out on viruses infecting raspberry, even though the diseases that these viruses cause result in economical losses for raspberry growers. Raspberry ringspot virus (RpRSV) belongs to the family Comoviridae and the genus Nepovirus. Nepoviruses are characterized by their icosahedral virus particles and bipartite genome of single-stranded (+) RNA (RNA-1 and RNA-2). These viruses are transmitted mainly by nematodes of the genus Longidorus, which feed on the roots of plants. RpRSV causes disease in raspberry, grapevine, strawberry and many other plants.

The aim of my thesis is to obtain knowledge of textile wastewater and textile sludge from an environmental perspective, which can be used as a basis for the  ?Sweden Textile Water Initiative? guidelines for a sustainable sludge management. In my study I have mainly focused on textile dyes, salts and metals and their routes during wastewater treatment.This paper is partly a literature review, which I began by identifying the pollutants discharged from each textile process. Then I studied wastewater and sludge quality, environmental aspects, possible treatment and recycling methods. I have also tried to find existing type of guidelines in order to make comparisons.

This report summarize what have been done during the Master of Science Thesis that Klas Schjelderup has written for the company RANOTOR Utvecklings AB. The company is developing modern steam engines and this work should develop a machine to perform tests on a new type of piston seal that hopefully could be used in the future. The steam engines will be both volumetric and energy compact, around 1600hp/literof cylinder volume, and it will have a lot of practical applications.The new type of piston seal is hydrostatic lubricated which means that a fluid is separating two faces that normally is in contact. In this case pressurized water is used to separate the piston seal from the cylinder wall. RANOTOR have earlier formulated that at least the expander in the modern steam engine have to be oil-free, due to other components functionality in the closed water system.

Francisella tularensis, the causative agent of the zoonotic disease tularaemia, is highly contagious and potentially fatal for a wide range of wildlife species of the northern hemisphere, also humans. Although recognized as a pathogen for over 100 years, much still remains to be elucidated concerning the ecology and transmission of the bacterium, hence this literature overview aims at compiling data regarding the aquatic association and the role of mosquitoes in transmission of Francisella tularensis subspecies holartica, the sole subspecies in Sweden. While a linkage between the bacterium and natural waters stands beyond dispute, there is no consensus in the literature concerning its potential as a reservoir. However, two prevailing theories can be distinguished; one proposes the water association being mammaldependent and thus merely the result of contamination from semi-aquatic mammals living in close vicinity to the water source. The other, quite contrary, suggests mammal-independence and hence that water, possibly in association with protozoa, serves as an environmental reservoir for the bacterium.

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Trädgårdens hantverk och design, 15 hp, 2015.

The situation at Plastal AB is following; the plant in Simrishamn has not capacity enough but the plant in Kristinehamn has unused capacity. My task with this master thesis is to build a logistic flow between this two plants, optimize purchase quantities and ensure delivery safety.The production of the Intermediate Section (LS) will be divided between the plants. The LS will be produced in the following way; the injection moulding process will be done in Simrishamn and the assembling and lacquering processes in Kristinehamn, The reason to divide the production is to ensure delivery safety. Plastal AB can not move the whole production of the l.S because the two plants have different processes (moulding res. injection moulding).When the 1.5 has been transported to Kristinehamn following moments are included in this order; lacquering, welding and assembling.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

The first regulation concerning the protection of shores was introduced in 1950. The purpose of that regulation was to "secure the general publics condition of an outdoor life". The protection has been sharpened over the years and in 1975 a general protection of the shores was introduced, which meant that all land was protected within 100 meters from the shoreline. In 1994 a supplement was made with the purpose to "preserve good conditions for animal and plants on land and in water". The Swedish Environmental Protection Agency (EPA) did an inquiry of the shore protection regulations commissioned by the Government in 2001. The inquiry pointed out that there were big lacks in the exemption decisions.

On commission of the County administrative board in Värmland County a method was developed for analysis of the occurrence of artificial land use at lakes and watercourses. With artificial land use is meant land significantly affected by man. Two bases have been used to carry out the analysis. In one of the analysis the vegetation database and in the other GSD¹-Marktäckedata (land cover data) was used (this method has been used by County administrative board in Jönköping County).The analysis comprises all watercourses within Alsterälven river basin. The digital water bodies are created by the Swedish Meteorological and Hydrological Institute on the basis of GSD-Översiktskartan (general map).

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

In this bachelor essay an attempt is done, to recreate a probable Bronze Age landscape on Gotland, with GIS as a tool. The landscape on Gotland is situated with many different monuments dated Bronze Age, such as cairns and stone ships. In creating of the maps, two possible shorelines contemporary with the Bronze Age have been calculated and marked on the maps. Furthermore, peat lands have been drawn upon the maps, by using the information from geological maps.A landscape variable have been compared between Bronze Age places and Early Iron Age houses; the soil type. On Bronze Age places gravel is the most common, while moraine marl is the most common on places with Early Iron Age houses.From a selection that were made, all Bronze Age places where within 3 km from the water, either the recreated shoreline or peat land.

Headwater streams are affected by anthropogenic impacts at multiple scales. One aspect of human impact is sediment transport associated to the abundance of stream structures as large woody debris and the composition of the riparian zone from forest to agricultural landscapes. Riparian buffer zones and stream structures like dead wood are considered as generally important structures for protection against an increasing amount of sediment particles in the water. Hence, in this study these structures were quantified in thirty different stream segments on land and in the water. To measure the transport of sediment Whitlock-Vibert boxes were used in three different types of landscapes; forest, transition and fields. The boxes were left in the stream segments for three months, the taken up and dried and weighed. The results showed that the transition-land in Frösvidalsån had the highest sediment transport. The second highest transport of sediment was in Blackstaån at the fields.