Bergvik Skog is one of the leading forest companies in Sweden who use airborne laser scanning for forestry information. They utilize laser data retrieved by the Swedish National Land Survey to describe the forest holdings and facilitate planning for thinning and final felling operations. However, the possibility to identify stands with clearing needs by using laser scanning data has not been tested in a large scale. The data used in the current study are field data from The Swedish National Forest Inventory in combination with laser data from the Swedish National Land Survey acquired in 2009. The collected data is used to find one or several laser variables that best describe the relationship of the field measured samples with clearing needs.

The problems with train-induced vibrations are increasing with heavier and faster trains. Therefore the work with propagating vibrations is of outmost importance, and that is what this thesis relates to.To get a sensible idea of the propagation, calculation models are often used. Propagation calculation models takes into account factors such as distance to the railway, the ground material and the velocity and weight of the train. This work is mainly about finding suitable existing models and, if necessary, adjust them to be more useful with modern trains and railways.The report contains the work of adjusting one such model and does, despite the fully functional adjusted model, describe how much more there can be done within this topic. Finally, a few tips about specific areas that preferably should be studied to get even further knowledge about the troublesome problems from railways..

AbstractThe purpose of this study was to see if there is a connection between smolt length from Brattfors salmon cultivation and temperature. Climate changes are expected to give a higher temperature that could result in a longer growing season for the fish.Cultivated smolt is today bigger than it was before, it is also bigger than the wild salmon. The growth season of salmonids depend on the water temperature, salmonids need 6-80C to grow. Water temperature has been surveyd since the late 50´s in Brattfors. The result shows that it?s now considerable more days per year with higher temperature.

AbstractTitle: When book becomes film... ? a comparative analysis of the book and film Catch me if you can (När bok blir till film?En jämförande analys av boken och filmen Catch me if you can)Number of pages: 46Author: Majlinda JunikuTutor: Amelie HössjerCourse: Media and Communication Studies CPeriod: Autumn term 2007University: Division of Media and Communication, Department of Information Science, Uppsala University.Purpose/Aim: To study what model of dramaturgy belongs to the film Catch me if you can and to see what has been crossed out, altered and added from the book so the narrative will fit this model.Material/Method: The film Catch me if you can and the book with the same name has been used to analyze the differences between them. I have divided the differences into three categories: Crossed out, Altered and Added. In the analysis section these have been presented in each section of the film.Main results: Catch me if you can is definetly a film made with the design of the Anglosaxon model, mostly because of its timestructure and that it portrays an action and not just a condition which is normal in the epic-lyric model.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

The aim of this thesis is to analyse the possibility to identify the FRBR entity expression from existing catalogue records performed within the context of Swedish cataloguing rules. The empirical study uses a sample of records from the catalogue within the library at the University College of Borås. To begin with, the thesis reports some of the earlier discussion about the FRBR model. That gives an understanding of which problems the model has and justifies the study?s delimitation towards expression.

For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

European Union has made a new decision that all new built houses by 2020 shallbe near-zero energy houses. Boverket?s definition of near-zero energy housesintends buildings with good energy performance in which a proportion of theamount of energy that must be added to the building is made of renewable energy.Passive House is a set of requirements from FEBY designed to build energyefficient buildings. This is achieved by reducing loss of heat through the buildingenvelope and to take advantage of the passive heat from solar radiation,installation and heat sources like people living in the house.This project has been made with help of Anebyhus and one of their model houseshave been examined from the report?s issues, including Anebyhus?s energyperformance, requirements for the manufacturing and assembly, how theenvelope must be improved to fulfill the requirements for the Passive House andwhat energy calculation programs are available on the market.The report aims to provide solutions for energy efficient houses that are adaptedfor production of house building.Two visits to Anebyhus has been done to study their manufacture and assemblyof building elements.

The freshwater pearl mussel (Margaritifera margaritifera) is a large freshwater mussel. Because of its sensitivity to human impact, such as eutrophication, acidification and alterations of hydromorphology, the species is considered as a robust indicator of stream water quality and biodiversity. Moreover, due to the species complex life cycle, including a larval stage on the gills of salmon and trout, and sensitivity of early life stages, regeneration is often used as an indicator. The freshwater pearl mussel is also used in the expert judgement of status classification of benthic invertebrates according to the European Water Framework Directive. The purpose of this study was to gain a deeper understanding of the freshwater pearl mussel as an indicator for Swedish streams. It was made with two types of association analyses.

Objective: In recent years there has been an increasing interest within the clinical (medical) science in measuring people?s health. When estimating quality of life, present practise is to use the EQ-5D questionnaire and an index which weighs the different questions. The question is what happens if the individuals estimate there own health, would it differ from the public preferences? The aim is to make a new prediction model based on the opinion of patients and compare it to the present model based on public preferences.Method: A sample of 362 patients with unstable coronary artery disease from the Frisc II trial, valued their quality of life in the acute phase and after 3, 6 and 12 months.

The purpose of this project was to design an adjustable gutter bracket for Lindab Profil AB. Lindab currently manufacture a gutter bracket that is adjustable in angle, however, this model has some drawbacks.  One of it´s shortcomings is that it is somewhat difficult for the customer to mount.  Another problem with Lindab?s current model is that the design makes manufacturing unnecessarily complex. The new gutter bracket, that we have constructed, does not have these problems. It is adjustable for different roof pitches.

The purpose of this report is to find a model of statistics for construction and demolition waste, which makes it useful for the local manager at the building site. The intention with the model is that it will be used as a support of the local manager, to direct his project towards reduced strain of the environment. The model will also be used to make it easier to control that the claims from authority and aims for the environment are achieved. To familiarise with the subject waste handling within the building and construction sectorI have done a literature search. I have also been studying rules and regulations regarding the waste handling.

The goal of this master thesis project was to develop computer models of some plausiblepretreatment techniques and to assess the potential benefits/costs of using pretreatment andanaerobic digestion for waste management of organic waste from a system perspective. Forthis purpose a computer program called ORWARE has been used. ORWARE (organic wasteresearch) is a program for making life cycle assessments of waste management. As the mainpart of the project work the ORWARE system has been provided with three new models ofpretreatment techniques. The additions consist of: One model of pretreatment with ultrasound,one model of thermal hydrolysis and one model of a screw press.

This study was the foundation for an evaluation of an employment project in Sweden. The project offers occupations in carpentry as well as kitchen work for people with psychiatric disorders, substance abuse and other social difficulties. This studies purpose was to analyze the projects significance to its participants and also to distinguish weather the project influences the participant?s life in a professional or private way. The methodological tool was five qualitative interviews with the participants and three qualitative interviews with the employees.