The lack of fresh and clean water today causes severe problems, mostly in developing countries. Waterborne diseases like typhoid, cholera, amoebic dysentery and diarrhea create health problems and deaths among people. There is a need for low cost interventions like household-based water treatment and safe storage (HWTS). Solvatten AB is a Swedish company based in Stockholm. Their product, Solvatten, is a household water treatment unit that can treat water containing viruses, parasites and bacteria.

This report describes the master thesis project ?Weight Optimization of a Composite Chassis for a Multimodal Lightweight Vehicle? which is a part of the Master program in Naval Architecture and a part of a research project at the Centre for Naval Architecture, KTH. Demands on smart and energy efficient transport solutions are continuously increasing. In the Stockholm region the citizens are expected to increase with 25% and the road vehicles with 80% until 2030, putting high demands on the traffic system. Using a small multimodal vehicle deals with this problem and uses both the land and waterways for transportation.

In 2010, Airwatergreen AB started testing their new technology, the Airwaterwell, an atmospherical water generator of their own design that is running on solar heat, with a production capacity of three litres of water per day and m2. The purpose was to focus on foreign aid organizations as main purchasers for project investments towards rural communities in developing countries that suffer from lack of, or compromised quality of drinking water. In order to further understand if this technology would bring a positive impact in the developing countries, the company contacted the Swedish University of Agriculture for a socio-economic study of the Airwaterwells? potential. The authors elected Cost benefit analysis as the appropriate method for conducting the study and India became the study region because of its many problems with water related issues such as diseases as well as insufficient water supply for households. The regions that this study is based on are Gujarat, Haryana and Uttar Pradesh given their differences in income, health situation and poverty rate.

The European Water Framework Directive (WFD; 2000/60/EC) was incorporated into the Swedish legislation in 2004 through the ordinance Förordningen om förvaltningenav kvaliteten på vattenmiljön (SFS 2004:660). The objective is that all water bodies shall reach a good status by the year 2015. In Sweden the comprehensive plans of the municipalities can play a large role in reaching these goals. A comprehensive plan deals with the long term water and land use of the municipality, which can facilitate an early consideration of water management in the planning process of the municipality. In Sweden five river basin districts have been established in accordance with the Water Framework Directive.

In many European countries there is an increasing concern about the occasionally high concentrations of nitrate and pesticides in drinking water. The advent of the EU Water Framework Directive particularly highlights this. The directive states that all large drinking water sources should be identified and protected from pollution before 2009 and that by 2015 all water bodies should reach a 'good status'. In Sweden about 60 percent of the drinking water sources have protection areas. This means that about 700 new water protection areas need to be designated before 2009. This will affect many farmers, restricting their farming practices. The purpose of this study was to investigate which methods are used in other countries concerning nitrate and pesticide pollution from agriculture. From this, the expectation was to generate ideas on what could be undertaken in Sweden when designating new protection areas.

This study is based on AgroSeas business idea from environmental problems to valuable resource, with the objective to optimize a method to purify the already eutrophicated Baltic Sea by harvesting water plants, mainly reed. The nutrients will then be recirculated to arable land through residues from biogas production. The amount of nutrients that can be removed by harvesting the biomass depends on the amounts of biomass and the nutrient content of it, which in turn is strongly dependent on the nutrient concentration of the surrounding water. Vegetation suggested in the study for an effective nutrient uptake is helophytes: reed, cattails, reed canary grass, reed sweet grass in shallower water and lemnoideaes: duckweed and nymphaeids in the deeper parts. Competitive species has high purification ability but requires regular maintenance to avoid channeling and overgrowth. Regarding time and method of harvest, effectiveness may be improved by: harvesting plants above the water level and after flowering, a border is kept, harvesting twice a season, a bigger machine and a regular maintenance. This literature has illuminated a major environmental problem and it has been suggested optimizations for a method for cleaning the Baltic Sea through harvesting water plants, but to get a definite answer for the optimal method for each site tests should be carried out, this because many factors determine to what is suitable for each, specific environment. .

The thesis aims to be an informative study for landscape architects and hopes to contributeto an understanding of ways water can be used and managed at sites lacking open, greensurfaces.The title "intelligent water design" should evoke the reader?s thoughts concerning intelligentaspects of water. Text, images and the design proposition give hints about these aspects.In the first part of this thesis, various examples of water design are presented. The chosenexamples are all applicable in urban environments with a high percentage of impervioussurfaces.The second part examines Gjutarplan, an urban square in the centre of Kallhäll, in Järfälla,north of Stockholm. Gjutarplan is first framed in a geographical and historical context.

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

The objective of this thesis was to get more knowledge about how to design a dairy farm reducing the working hours and the work tasks whit high work load. I will try to reduce the working hours and the tasks whit high work load on my own farm witch I am about inherit. Today, the old stanchion barn has room for about 60 cows and 74 young cattle and need two men to run it every day. The total acre is 188 hectare, 100 hectare forest, 65 hectare farmlands and 23 hectare natural pasture. I have studied two solutions. In the first solution, I will use my old barn for young cattle and build a new barn for the cows.

The European Water Framework Directive (WFD; 2000/60/EC) was incorporated into the Swedish legislation in 2004 through the ordinance Förordningen om förvaltningenav kvaliteten på vattenmiljön (SFS 2004:660). The objective is that all water bodies shall reach a good status by the year 2015. In Sweden the comprehensive plans of the municipalities can play a large role in reaching these goals. A comprehensive plan deals with the long term water and land use of the municipality, which can facilitate an early consideration of water management in the planning process of the municipality. In Sweden five river basin districts have been established in accordance with the Water Framework Directive.

At the moment in central Täby there are small district heating network operated by Fortum Heat. The distribution network has an annual heat demand of about 70 GWh, which is supported by the network's two plants, Galten and Farmen. Täby as a region is rapidly growing and there are grand plans to develop the area. Estimated market potential for a future district heating expansion in Täby is very high and as early as in 2007 Täby decided to invest in a large-scale expansion. In autumn 2009 Täby did a procurement process, known as the ?Täby initiative?, to find a partner that could implement those expansion plans. To secure a cheap basic production the partner also need to build a power plant at Hagby recycling center. Despite high interest during initial state of the process, only one procurement offer were received and Täby suspended the contract in March the following year.

This bachelors thesis was made forWallenius Water AB to develop a basisfor an Airpurifier prototype. Wallenius Water isone of the world's leading environmentaltechnology companies engaged inchemical-free water treatment based onUV-radiation. The thesis aim was toproduce a basis for a prototype that canbe used in three applications:Standalone, RAS systems and ventilationsystems. The work includes anintroductory description of the theorybehind AOP technology based on aliterature review on the subject. Asurvey of products currently on themarket and a product specification hasbeen used as the basis for thepreparation of a number of concepts inthis report.

Fuel produced from renewable resources is of big interest. In this project the difference between a few different renewable materials are compared on the matter of environmental load when ethanol is produced. The renewable materials that are compared are Salix, straw and reed canary-grass (rörflen). The cellulose in the material is cut down to small pieces and then hydrolysed so that the sugar from the cellulose can be fermented into ethanol. Tha amount of ethanols that is studied in this work is the smount of ethanol needed to cultivate 1000 ha. The functional unit in the report is 1000 ha.

Both the German and the Nordic power markets are seeing dramatically changed conditions due to an ongoing process of expanding the share of renewable production in the systems. For the German part this comes from heavy subsidies which have led to an explosive development in installed capacity of photovoltaic and wind based production. After the Fukushima incident it has been decided to shut down all Germanys nuclear plants. This capacity drop is however not of the same magnitude as the increase in renewables, but will impact the stability of the power system. The Nordic power system which already has a surplus of power sees an even further increase, coming mainly from construction of new nuclear plants in Finland and a general increase in wind farms.

The sound part is mainly practical and is dependent on concepts that have been tested through measuring with a sound level meter. The design part is more theoretical and has been verified with CAD models and finite element analysis.With a sound damping hood on the compressor the sound level is reduced with up to four dB. An optimized absorbent for the compressor space gives a reduction with three dB. By using the insulation for the heat water tank as absorbent we can see a sound reduction on the lover octave bands. A reduction like this is elsewhere hard to achieve as at it requires thick absorbents.By changing the today?s insulation to the heat water tank to a form of polystyrene polymer insulation the weight from the heat pump above can be transferred to the stable heat water tank.