A new build in the Swedish nuclear power system would entail increased re-quirements for the proposed repository, which is adapted after the reactors of today. With a fast reactor, capable of burning nuclear waste, operating in parallel with the light water reactors, the increased requirements on the repository could be reduced.In this thesis, simulations of a light water reactor and a fast reactor have been performed by using the Monte Carlo code Serpent to investigate the changes in the fuel inventory. The light water reactor in the study is a boiling water reactor and the fast reactor of the type sodium-cooled fast reactor and they have been used for three different operation scenarios.By studying the fuel composition and the results from the simulations of the three scenarios conclusions can be drawn. Conclusions regarding the change of the fuel inventory and decay heat in Clab as well as the interim storage facility and in the repository. Depending on the operation alternative the changes dif-fered significantly and especially regarding the mass of burned actinides for different fuels in the fast reactor.The lowest increase of fuel assemblies was meet when using 50 years old fuel with 20MWd/kg U burnout and 2,0 % enrichment for start up of the fast reactor and 30 years old fuel assemblies with 50MWd/kg U burnout and 4,7 % enrichment for the further operation of the reactor.The increase of the number of fuel assemblies was 3174, which is equivalent to 641tons of heavy metal.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

Lining techniques such as nap bonding and mist lining were developed in the late 20th century and have gained popularity alongside with the increased use of acrylic emulsions as adhesives. The ability of the adhesive to create a nap bond to the canvases without penetrating the fibers has shown advantages regarding reversibility. In addition, the use of moisture, heat and pressure is reduced, which can be advantageous for more sensitive paintings. These lining techniques have been included in several studies where reversibility, minimal intervention and respect for the individual requirements and problems of each object have been the focus. The adaptability of the methods has been confirmed and to further explore the adaptability, this study consists of three simpler application techniques with the adhesive Lascaux 303 HV on mockups.

Stage-discharge equations for lakes without disharge measurementsSimon AnderssonIn 2015 all lakes, rivers, coastal water and groundwater should be of good ecological statusaccording to the water framework directive from the European Union. In the process ofimproving the quality of Swedish water bodies, knowledge of where problems occur isneeded in order to utilize the resources optimally. The ability of lakes to store water is animportant factor since it controls the flow of water through the country. A stage-dischargeequation is a mathematical relation between discharge from a lake and its water level. Bybetter understanding of stage-discharge equations for lakes, their storage capacity can bedescribed better in hydrological models.This master thesis aims to evaluate methods for determining stage-discharge equations forlakes where a variable amount of field measurements is available.

This report investigates a possible solution to the problem with adapting wave powerplants to work in countries with tidal water. The wire connecting the buoy at the surface with the generator at the bottom needs to adjust to the varying water depth. Our solution to this problem is to attach the wire to a jack which is then placed inside the buoy. The jack is then powered by an electric engine. The report discuss what forces the buoy will be exposed to and then the structural integrity of the design is evaluated through simulations.

Uvån Hagfors Teknologi AB (UHT) has developed a process ? GRANSHOT® ? for quicksolidification of metals in water baths. In the process liquid metal is splintered ? granulated ?into small drops. The drops are rapidly cooled in a water bath where all the heat energy from theliquid metal is transferred into the water.

With the farming methods of the past century the agricultural landscape has changed. This has led to the fact that many habitats and species have been significantly reduced. Sweden is committed to the preservation of biodiversity through various conventions and laws. In the EU's Common Agricultural Policy there are currently agro-environmental schemes, which were created as an instrument for reducing the negative impacts of agriculture on nature and environment. Within this system any farmer who perform environmental measures are financially compensated for this.

Hemp has been used for textiles for a long time in history until it became illegal to grow in many countries in the 1930s. It is interesting from an environmental point of view because it doesn?t need any pesticides and in most locations it doesn?t need any irrigation either, compared to cotton, which normally requires big amounts of both pesticides and water for irrigation. Hemp is a bast fiber, which means that the fibers are located on the bast of the stem (on the outer layer of the stem). Therefore they cannot be spun directly, they have to be removed from the stem first.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2014:07.

In metropolitan areas where the exploitation pressure increases, also the importance to point out nature areas grows, both for the sake of outdoor life and for biodiversity conservation. Since nature conservancy and spatial planning constitute two different parts of the municipalities land use control, a case study has been carried out in two municipalities in the Stockholm region, Huddinge and Järfälla. Both these municipalities have protected about one third of their land and today there are plans to repeal parts of the reserves to enable exploitation. This thesis shows ? from the theoretical concept of sustainable development ? officials, politicians and non-governmental organizations perspectives on questions concerning land use together with the work with nature reserves and repeals.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorsprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2012:24.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Landskapsvårdens hantverk, 15 hp, 2014.

How can we use modern X-ray technology to raise awareness of the information that is hidden in historic upholstery? The materials and techniques add information to the history object in question and  about a profession that is sparsely documented in our country. The knowledge we have today has largely been obtained by studying damaged upholstery, or by removing the show cover and upholstery, a technique which involves high risk of damaging the upholstery. X-ray technology offers  a non- intrusive way to examine historical upholstery.Through case studies, I examined four artefacts. The artefacts went trough an inititial visual exam before being transported to The National Heritage Board in Visby where they underwent a thorough X-ray exam.

Most of the saw and pulp industries have stored wood nearby their production, the main reason is to have a continuous wood flow to the production. Wet storage of wood is of great importance to keep the wood quality. Without water sprinkling the risk of drying outand decomposition through biological activity increases significantly and will result in a negative effect on future production and quality. One drawback of wet storage of wood is the leaching of chemical substances into the surrounding recipient. The log yard run-off contains phosphorus, nitrogen, phenols and organic substances. These substances can cause problems for the surrounding environment. The main objective of this project is to gain an understanding of the wet storage used by the Swedish wood industry and estimate the environmental consequences that run-off water will have on the recipient.

Bioenergy from the forest has been heavily debated in Sweden for several decades due to the interest of society to decrease dependence upon fossil fuels and limit the effects of climate change. The actual use of bioenergy from the forest has shifted over the years but increased during the last decades. Private actors within forest and nature conservation sectors play an important role for the development of bioenergy from the forest as well as for the debate and the implementation of political goals. Forestry in Sweden is characterised by ?freedom under responsibility? for private actors and the perspective of governance is valuable for studying actors and discourses.