The focus of this study was to examine the nutrients and benthic organisms of the bay ?Mönsteråsviken?, which is influenced by eutrophication. The purpose was also to look at an interesting gradient forming in the bay, namely the distance from the river outflow of Lillån. At 18 sampling sites in the bay samples of water, sediments and benthic organisms were collected in late April of 2011. The water was analyzed for nitrate, phosphate and chlorophyll.

Perfluorinated substances (PF) are environmental pollutants that are used to coat fibres of so called ?all weather clothes? to make them water resistant. PF are effectively spread through water. Waste water treatment plants (WWTPs) are a pollutant source of these substances. PF are poisonous to different kinds of organisms, and supposedly also to human beings, if concentrations are sufficiently high.Perfluorinated substances have been investigated at three waste water treatment plants in Stockholm during the 2000?s.

Stump treatment today requires large quantities of clean water mixed with the protective product Rotstop, to fully cover the stump surface. In order to reduce the water consumption without reducing the coverage of the stump surface, the pressure in the stump treatment device can be increased. Therefore, the Phlebiopsis gigantea (Fr.) Jül. suspension used as a biological control agent to prevent Heterobasidion annosum (Fr.) Bref. infection was pressure-tested.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

The continuous process of urbanization results in demands on research and development for ecological and sustainable city development. Because of this, the current systems for wastewater treatment may have to be improved. In order to evaluate new technologies for municipal wastewater treatment, a development project has been initiated for the new district Hammarby Sjöstad in Stockholm. The project is lead by the company Stockholm Water. High environmental standards have been put up for the district, as it must be twice as good as an ordinary new district.

The aim of my thesis is to obtain knowledge of textile wastewater and textile sludge from an environmental perspective, which can be used as a basis for the  ?Sweden Textile Water Initiative? guidelines for a sustainable sludge management. In my study I have mainly focused on textile dyes, salts and metals and their routes during wastewater treatment.This paper is partly a literature review, which I began by identifying the pollutants discharged from each textile process. Then I studied wastewater and sludge quality, environmental aspects, possible treatment and recycling methods. I have also tried to find existing type of guidelines in order to make comparisons.

A case study of professional interaction designers' usage of design materials was conducted. Five interviews were performed in order to gain insight in the systems used by designers, how these work, how they collaborate within them, and what they think of recent research about them. Design studios allow collaboration for several users at once. Digital material (mockups, pictures, etc.) are commonly used, but needs to be made analog, e.g. printed, to be usable in the design studio environment.

The city of Uppsala and its surroundings are a very expansive area. A prerequisite for a sustainable development of the area is well-functioning supply of drinking water. In Uppsala municipality, the Uppsala esker and Vattholma esker are the groundwater storages for drinking water. Besides the eskers, other sources of qualitative groundwater in the Uppsala municipality are relatively poor and more than half of the area consists of ground conditions with a risk of saline groundwater. The neighbourhood of Vreta-Ytternäs is situated 10 km south of Uppsala, in the area with risk of saline groundwater but outside the municipal water supply.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

Sweden has long had access to low electricity prices due to the wide availability of hydro and nuclear power. This has now changed because of today's rising electricity rates resulting in increasing heating costs for properties, especially in the properties with electric heating systems."Ankaret" is a parish for "Svenska Alliansmissionen", which is located at "Gullbrannagården".The parish has installed electrical radiators and an exhaust ventilation system that makes the energy demand high due to the large ventilation flows. The building was built as the price of electricity was still low and would reduce energy use today by combining its heating system with an air/air heat pump. The heat pump delivers more heat into the room than the electrical energy that it uses. This lowers the electricity needs.

This graduation thesis is about baths and beach like places in city centers. It focuses on recreation and the creation and development of public, social spaces in the city containing water as a visual and useable element. The thesis is divided into three parts; background, inspiration and application. The background examines four factors which we consider important for the occurrence of inner city baths; water, the history of bathing, inner city recreation and social life in public places. A discussion of the (future) importance of inner city baths and beach like places' is then presented. The inspirational part is divided into examples of existing places and examples of types of places. The first is used in an attempt to examine the function and importance of inner city baths and beach like places as well as the opportunities and challenges associated with them. The latter contains a presentation of six categories developed by us to facilitate the planning of inner city baths and beach like places.

Design management är ett arbetssätt som har börjat tillämpas av allt fler företag de senaste åren, men det kan fortfarande vara svårt att förstå betydelsen av design management. I uppsatsen undersöks det vilken betydelse en design managers kompetens och position har för samarbetet mellan det designköpande företaget och en designkonsult under ett designinköp. Genom ett flertal intervjuer, utifrån både design managers och designkonsulters perspektiv, undersöks det hur samarbetet fungerar mellan dessa parter. En analys av intervjumaterial med hjälp av en teoretisk referensram bestående av design management-teori, design som en integrerad process och beslutsrollsteori har lett fram till ett antal slutsatser om design management. Några av slutsatserna är att design management, enligt teorierna, som arbetssätt inte är så vanligt och att det finns en viss samarbetsbrist enligt de intervjuade designkonsulterna, som i viss mån underlättas om design managern har kunskap om vad design innebär..

This Master degree project has been performed at the Braviken paper mill on papermachine 53 (PM53) which produces newsprint paper. The current economic situationhas contributed to declining demand for newsprint, which means it is extra important tobe competitive by high energy efficiency. Particularly as energy prices are expected torise when the economic growth returns.One way to increase energy efficiency is by reducing the water use in paper and pulpmills and consequently save energy through reduced heating of water. The thesis's maintask is to evaluate whether a water purification plant (microflotation plant) forpurification of process water in PM 53 is profitable. The microflotation plant enablesreuse of warm process water instead of losing the energy to receiving waters.

It is important that the current urine separating systems are evaluated to allow improvements to be made and consequently increase their future propagation. In order to increase the knowledge about urine separating systems this study was made. It included, among other things, measurements of amounts of urine as well as of the composition of urine collected at Nytorgsgatan 4 in the city of Hallsberg. The study was increased after an inquiry that also included the district of Understenshöjden in the city of Stockholm. In the inquiry, the users were asked questions about odour, cleaning of toilets and occurrence of blockages in the urine water locks etc.