This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

The objective of this study is to examine the sustainability of recovering industrial Wasteheat from several heat sources in a foundry constructed in a plant belonging to ITT Waterand Wastewater in Emmaboda, Sweden. A triple bottom line perspective will be appliedto achieve this objective. The triple bottom line approach takes into account ecologicaland social performance in addition to financial performance. The technology forrecovering the Waste heat is a Borehole Thermal Energy Storage (BTES) which is aconstruction consisting of 140 vertical boreholes, 150 meters deep with an internal spaceof four meters.The calculated amount of energy for storage is approximately 3800 MWh annually. Ofthis amount 2500 MWh are expected to be utilized, while storage losses accounts for theremaining part.

This investigation?s task was to map manufacturing of special qualities at Stora Enso Packaging under a certain period, analyze if rules concerning special qualities is followed, which consequences this results in concerning use of paper, Waste and costs and to give suggestions on alternative solutions. The goal was to give sugges-tions that help the company to reach its business ratio that the production de-partment uses within use of paper and productivity in the corrugated cardboard machine.Stora Enso Packaging is a part of the forest group Stora Enso and is one of Swe-den?s leading producers of corrugated cardboard. Stora Enso Packaging acts pri-mary on the Swedish market, where they have a market share of 25 %.To be able to analyze orders with special qualities we did a data collection during two months, where we mapped incoming orders.

The incineration of Waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.

People in today?s society are becoming more and more aware of how important it is to use energy as efficiently as possible. This is clearly noticeable by an increase in home produced heat with e.g. solar panels or heat pumps heating systems. These changing customer demands forces district heating technology to be redesigned, which is why there is an ongoing research regarding the next generation of district heating - low temperature district heating (LTDH).

Våren 2011 beslutade Röda Korset i Sverige att sluta skicka skänkta kläder som bistånd till katastrofområden. Röda Korset ställdes nu inför frågan vad de ska göra med de skänkta klä-derna för att omvandla dem till en resurs.Uppdraget var att i samarbete med Zäntrumprojektet och Röda Korsets secondhandbutik Ku-pan förädla de skänkta kläderna på ett miljövänligt sätt. Tanken är att Zäntrumprojektet ska sy om de skänkta kläderna till nya produkter som sedan ska säljas i secondhandbutiken Kupan.Syftet med den här uppsatsen är att finna ett sätt att förädla de skänkta kläderna och skapa nya produkter av dem. Vidare ska de skänkta kläderna skapa bättre resurser till Röda Korset som de kan tillgodogöra sig i sitt välgörenhetsarbete. Produkterna ska vara skapade på ett sådant sätt att de avger minsta möjliga avfallsmängd, främjar hållbar utveckling samt är attraktiva för Röda Korsets secondhandbutiks kunder.

Aquaponics is a food production system consisting of a consecutive cultivation of plants and aquatic animals, fish or shellfish, in recirculating water. The plants feed on the nutritious effluents from the fish tank and bacteria converts ammonia from the fish tank into nitrate that is absorbed by the plants. The plants receive nutrition and the fish gain purified water. The environmental impact of the production of fish meal and fish oil used in conventional fish feed includes a large consumption of fossil fuels with subsequent carbon dioxide emission. The aquaponic system can be made environmentally sustainable and self-supporting if supplemented with a vermicompost/vermiculture for the production of worm protein as a fish feed. Vegetable Waste from the hydroponic part of the system can be reused as worm feed in the compost and the protein rich worms can be harvested, dried and grinded and brought back to the aquaculture as fish feed. As a first step in this direction, I have investigated the effect of recycling of vegetable Waste in vermicomposts on the growth and number of earthworms (this was evaluated after harvesting). The hypotheses were that earthworms can be cultivated in the vegetable Waste and that by adding manure to the vermicompost it is possible to obtain a nutrient content adequate to support a continuous worm harvest, in other words create a vermiculture. Eisenia fetida and Dendrobaena veneta were grown in 20 L bins containing peat mixed with either poultry or cattle manure. The proportions were 70% peat and 30 % manure. Discarded plant parts from lettuce cultivation was added to the vermicomposts (35 g per week) and water was supplied with 0.8 L per week.

This master thesis encompasses an inventory of the older industrial community of Gimo. Investigations of the contamination situation for each industrial area were done. A risk classification according to the Swedish Environmental Protection Agency?s ?Method of Surveying Contaminated Sites?, phase one, followed. The risk classification was done on areas of Iron Work, a rockwool industry and a landfill. Gimo have had iron manufacturing from 1615 until 1945. Gimo have had two blast-furnaces and two smithies periodically.

The incineration of Waste is steadily increasing in Sweden and so is the production of ashes. The bottom ash has for many years been used as construction material in landfills. Now many of the nation's landfills are closed and there is a great need to find another beneficial use for the ash. Bottom ash is a gravel-like material and with its material properties it can replace natural gravel in parts of roads and surface constructions. Today this use is only approved within landfill areas where leachate is collected and checked.

Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how Waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (Waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.

SUMMARYEnvironmental issues are currently a hot topic of debate. Studies within the optics branch have not specifically been conducted previously, so the aim of this study was to determine the extent of environmental-awareness specifically within this branch.A survey, consisting of questions relating to environmental issues, was distributed to 100 randomly-selected opticians in Sweden. Of these 100 surveys, 64 were returned and showed a varied branch-engagement for environmental issues.Results of this survey showed that opticians were best in sorting newspapers, magazines, other paper and hazardous Waste. Metal and rigid plastic were not sorted to any larger extent.Choosing environmentally-safe products was not so popular and only six stores always do this. 25 shops turn off electrical machines and equipment over night; while the majority of the remaining stores leave the machines on during the night.27 stores did not know if their electrical company provided ?green electricity?.Results showed that there is a lot of work to be done in making the stores more environmentally friendly.

Considering that the price and demand for energy gradually has risen over the past decade and a wider discussion about the human impact on the environment has become increasingly more important and given a clearer role in modern society. This has contributed to increased incentives to reduce the use of fossil fuels and increase the use of renewable energy.The agriculture currently accounts for 20 % of Sweden's total greenhouse gas emissions. A way for an agricultural company like Wapnö AB to reduce their emissions could be to utilize existing renewable energy sources within their own premises.The report's aim is to create an energy audit of Wapnö?s existing energy system and how it changes with a future biogas plant in operation. The energy audit is used to illustrate how the company?s climate footprint could change.

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several Wastes in the Risifrutti production. Recommendations for improvements based on these Wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since Waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..

SammanfattningBegreppet slöseri, av engelskans Waste, är en term som i dagsläget saknar en klar och entydig definition inom mjukvaruutveckling. Denna rapport har skrivits vid Kungliga Teniska Högskolan i Stockholm och syftar att klargöra termen slöseri och vad den innebär men hjälp av olika projektledningsverktyg från IT-branchen. Det har framkommit att förtag sällan jobbar med en och endast en projektledningsmetod inom mjukvaruutveckling utan det blandas verktyg från olika metoder. Det är ofta brist på kunskap om valda verktyg och hur de ska användas samt vilka olika verktyg som kompletterar varandra eller ej är kompatibla med varandra. En ökad medvetenhet kring valda modeller och verktyg skulle leda till ökad effektivitet och minskat slöseri.

This final year project is made for Peab Jönköping and its target group is the construction industry. The main focus is the use of unutilized building material in the most economical and environmental-friendly way. Unutilized building material is here defined as material purchased for a construction project that for different reasons not has been used. The most important thing to find out was how much building material considered as being Waste is actually useable material, and how much less it costs to use that building material instead of throwing it away.When this information was gathered a proposal on how to efficiently use the unutilized building material instead of wasting it was designed. Costs and incomes were investigated and the proposal suggested a storage area where Peab can store their unused building material.