Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

The most common way to treat wastewater in Sweden today is by a combination of an activated sludge process and a chemical treatment. These processes are not very energy efficient and may not be the most environmentally friendly. That is why it is interesting to evaluate new alternative methods to see if they can be less harmful to the environment and help to a lower resource consumption. New techniques are tested in a pilot installation at Hammarby Sjöstad, Sjöstadsverket. To be able to evaluate these techniques in a wide perspective system analyses are conducted where different impacts can be considered, advantages and disadvantages in the systems.Five system structures for water treatment have been constructed in Matlab/Simulink in this study.

In this thesis we focus on the issue of crowdfunding and especially how a project relates to and embraces its community. While a lot of related research focus on what makes people give, our research instead delve into whether a creator looks upon the sponsors as something more than just a financial resource. To manage this task we used a triangular perspective consisting of a case study, a questionnaire and a netnographic study. The goal was to gain the perspectives of creators, crowdfunding platforms and sponsors on how the communication between the community and the project works and can be improved.       The three crowdfunding platforms we reviewed (Kickstarter, IndieGoGo, Rockethub) all had fairly similar models on how to attract sponsors and make them involved in the project, while the questionnaire and netnographic study demonstrated how a community could contribute in different ways.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

Det här kandidatarbetet undersöker hur Physically based rendering kan påverkar en 3D-grafikers arbete. Målet är att skapa förståelse kring physically based rendering och hur denna tekniken kan komma att påverkar en 3D-grafikers arbete. För att undersöka problemområdet skapades en virtuell miljö i 3D med hjälp av physically based rendering. Arbetsupplevelsen jämfördes senare med det tidigare arbetssättet. Undersökningen beskriver tidigare arbetsätt och hur arbetet har ändrats med physically based rendering.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

Today´s debate in farming is being focused on tourism, outdoor life and hobbies in the rural areas. This is of interest also for the general public as a way of counteracting the depopulation of the rural areas. Within the last years, the farming has become more technically advanced and hence efficient. This has led to increased production volumes and wider selection of products with lower margins for the farmer as a consequence. When the profitability is reduced, the farmer is faced with the choice of either increasing efficiency or diversification of the business.

The control of indoor temperature must be able to handle large time constants and both measureable disturbances like outdoor temperature, and non-measurable disturbances, like waste heat from appliances. Due to cheaper microcontrollers (small computers with designated tasks) with better performance, more advanced and computation-demanding methods for control can be used.In this thesis, Generalized Predictive Control (GPC) has been implemented and tested on a theoretically derived model of a house. GPC states that a model of the system is estimated in every sample, and the control is carried out simultaneously, based on predictions of the model. Disturbances like solar radiation can be estimated and used in the control as well. The control signals are determined by quadratic programming, which makes it possible to consider conditions, for example limitations on the control signals.GPC requires a number of parameters to be defined, like model order and control signal penalty, but is relatively robust for variations in them.

Första januari år 2013 trädde den senaste versionen av MARPOL Annex V i kraft. Denna studie har genom en litteraturstudie samt intervjuer med nautiska befäl sökt svar på vilka förändringar som skedde, hur dem implementerats ombord samt hur förändringarna upplevts av sjöfarare. Syftet med studien var att bidra med en pusselbit till bilden av hur avfallssortering utövas till sjöss samt hur arbetet med det upplevs. Litteraturstudien kom fram till att den stora skillnaden är att papper, glas, metall samt aska inte längre får slängas i havet. Inom specialområde får endast matavfall destruerat genom avfallskvarn slängas överbord.

The aim of the study was to map the extent of Fe, Cu, Pb, As, Zn and S contamination in the area surrounding the Nasa silver mine. The mine operated between 1635 and 1810 with some prospecting performed in 1889, and has become infamous for the gruesome ways that the indigenous people were treated during the early years of operation. This study tested three hypotheses through a geochemical survey: 1) sulfide oxidation is still active in the abandoned mine, 2) the soil downslope of the mine is contaminated by mine drainage, and 3) the stream downslope of the mine is affected in the same way. All three hypotheses were valid, as the results showed that still, >200 years after mining operations ceased, signs of the historical mining are clearly visible in the surrounding environment. Acidic conditions were discovered in surface waters close to the waste rock piles, which indicates active sulfide oxidation.

Treatment wetlands been showed efficient for reducing pollutant in waste water. In Lajeado ? RS, Brazil the landfill has poor leachate water treatment. It is necessary to supplement the treatment plant because they need to reduce BOD, COD and nitrate of the water going to recipient. A subsurface flow wetland (SSF) can be a good choice.  In order to be able to design an efficient SSF it is important to understand how the grain sizes of a substrate affect the reducing of pollutants in waste water.

Arvika Fastighets AB is a municipal subsidiary tasked with managing all green areas in the municipality, with a strong focus on the City Park and plant beds in the city centre. These areas generate large amounts of green waste, which is currently transported to the municipality's composting area at Lycke. Currently, the material is piled up and turned once a year without using the resulting soil for flowerbeds, lawns, and shrub/tree plantings. The purpose of the study is to determine if Arvika can compost the green waste in a more efficient manner and produce weed-free soil ready to be mixed into various substrates for different purposes. Interviews with the Swedish Church and several municipalities in Sweden have been conducted to learn from their experiences and knowledge of how they make their composting work.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

Eutrophication of the Baltic Sea and Swedish lakes remains a major problem despite many years of effort to reduce the emissions of nutrients. One major source is waste water systems, especially private sewage systems. These sewages accounts for a very large share of nutrients per capita in comparison with citizens connected to larger sewage treatment plants. Norrtälje community has the greatest number of private sewage systems in Sweden. Discharges of nutrients, especially phosphorus, to the Baltic Sea from these sewage systems are significant.