The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

This bachelor thesis contains the findings of an investigation into the laying of wedge sawn wood flooring. The advantage of wedge sawn wood flooring is the usage of more material from each board reducing waste. The boards follow the natural profile of the tree where the root part of the board is wider, and the top part is narrower. The technique involves placing boards side by side with adjacent boards in opposite directions. The thick base of one board is neighbored by the narrow top of another, this creates a pattern of wedges in alternating directions, known as a ?root and top? system. Existing literature into this type of flooring is sparce.

This paper investigates the autobiography of Damien Echols. The autobiographical subject, Echols, depicts his life as a marginalized youth during the nineteen seventies and nineteen eighties in Arkansas, USA. It also explores the years that Echols spent on Death Row after having been arrested along with two other youths for the murder of three eight-year-old boys; a crime all three of the accused denied having committed. In 2011, after eighteen years of incarceration, the three now grown up men were released from prison. The author of this paper discusses biography and especially autobiography as a genre and explores to what extent memories represent the actual life the autobiographical subject, Echols, has lived and if memories are or can be truthful.

This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.

Summary The leaf beetles, Lilioceris lilii and L. merdigera have existed in Asia, Europe and in North Africa for a long time, but have become much more abundant the last twenty-five years. Even North America has been affected during the last years. The purpose of this investigation of Lilioceris species in Sweden, is to give advice to gardeners, which type of control measures is the most effective in order to restrict their damage to lilies. Lilioceris species overwinter normally as pupae in the soil under the host or close by. Literature and contact with advisors have described the life cycle and spreading of Lilioceris. Under favourable conditions these leaf beetles have two generations/year in the south of Sweden. Both the adults and the larva eat the foliage, and by strong attacks even flowers can be eaten and only the stem is remaining. My own observations include different treatments of both lily foliage and of the leaf beetle.

The project has been provided by Zenit design group and the goal for this project was tomanufacture and perform tests of a prototype that supersaturates water in a continuous flow ofwater. The project has involved finding and sorting out relevant data in scientific papers, books,communication with foreign manufactures and other platforms for information.The project has resulted in manufacturing of a test rig and an oxygen infuser based onmembrane technology. The test rigs purpose was to perform tests on oxygen infusers fordifferent comparison test and performance benchmarks in a in a laboratory provided by Zenit.The project led to satisfying results using the oxygen infuser manufactured by the authors withcomparable levels of saturation to the reference infuser.The theory behind this project is based on medical research, belonging terms will be explainedbut the authors have chosen to delimit the project from the medical area. The reason for this islack of knowledge in this area and its irrelevance to the mechanical engineering education insuch..

The purpose of this report is to collect, compile and complement the scientific and experience based knowledge concerning high pressure fire fighting today. The goal is to produce a decision data for the Rescue Service concerning the use of high pressure systems for fire fighting. Focus is on hose reel high pressure systems but other systems are discussed too. The report begins by describing the technical properties of the different systems. Then the fire fighting properties are evaluated, including manoeuvrability and safety for users.

When harvesting ley you hope to get a fast drying and a faster harvest. If there is a system with round bales, you need to have a dry matter close to 45 %. To make this as fast as possible, there is made a machine which pick up the grass with an pick-up. It turn the grass over and put it behind the machine (figure 2 and 4). There are few tests to prove the efficiency of this machine.

Preporsition for bachelor thesis project, working from the inside and out. Emphasising spatial quality and experience, More or less ignoring form and program. I?ve had issues with these aspects in earlier project, the form or the program takes alot of place in the project. I haven?t tried this approach before, it?s an attractive thought to allow the project take a form of it?s own, enclosing those spaces i create.The initial concept was to place the pools on the ground (not digging them into the ground) making them volumes that divide and define spaces.

SyfteVårt syfte är att ge en djupare förståelse för det matsvinn som uppstår i livsmedelsbutiker genom att analysera och utreda servicelandskapets, personalens och kundens påverkan på matsvinn. Med koppling till detta syfte har vi valt följande forskningsfråga:På vilka sätt kan livsmedelsbutiker arbeta för att minimera sitt matsvinn med hänsyn till butikernas lönsamhet och kundnöjdhet? MetodDenna uppsats är en kvalitativ studie som haft sin början i ett empiriskt problem som vi ville skapa en djupare förståelse kring, vilket innebär att vår uppsats haft sin början i induktionen. Under processens gång har vi arbetat parallellt med empiri och teori, därför har studien haft ett växelspel mellan induktion och deduktion. Insamlingen av material har skett genom primära och sekundära källor där det empiriska materialet skett genom semistrukturerade intervjuer.SlutsatserI vår arbetsprocess har vi kunnat urskilja att servicelandskapet, personalen och kunden är de faktorer som påverkar matsvinnet inom dagligvaruhandeln.

The purpose of this thesis was to develop and optimize a method of analysis for combustion of organic chemical products, followed by an ion chromatographic quantitative analysis. This was to be achieved with the decomposition equipment IKA AOD 1. The aim was to receive a precise and repeatable method that would be able to be applied to the process of qualification and technical marking of chemical products at the company, OKG AB in Oskarshamn. A complete instruction for the decomposition equipment and the method of analysis was written. A number of parameters were chosen from the general method of the combustion equipment, which then was tested parallel with a simultaneous development of an appropriate ion chromatographic method.

The use of forage maize has increased over the last years. The aim of this litterateur review was to summarize a part of the research that has been conducted on forage maize for growing cattle, including cultivation and conservation of the maize. The forage maize is planted in April or the beginning of May when the temperature in the soil is between 6 and 10°C. Maize needs high temperatures and much water. Maize is harvested in the autumn when the dry matter (DM) is more then 30% or the plants have been exposed to the first frost in the autumn.

Although women express a desire to be managers and although they constitute the majority of Sweden's newly graduated academics, they are still heavily underrepresented on senior management level in the Swedish private sector, where men hold as much as 95 % of the top positions. Considering the massive waste of resources that this implies, this thesis sets out to investigate the underlying reasons for the skewed gender distribution on senior management level in two Swedish professional services companies - an industry where the described problem has been palpable. Additionally, the thesis explores the effects of actively working for increased gender equality. With a basis in gender and organization theory, a broad theoretical framework has been compiled and applied to a qualitative case study design. The thesis reveals seven distinct impediments, which together create a parable of an obstacles course, that prevent women from advancing the corporate ladder in the same manner as their male colleagues.

The title Urban furniture for young people reveals that this paper handles two central phenomenon in landscape architecture; the form and content of the urban spaces, respectively the users and their need for an appropriate outdoor environment in the city. In this paper youth is referred to as 15-18 year olds and the paper is based on theories of their physical use of the city?s outdoor environment. Urban furniture refers to equipment and components in the public room which becomes furniture when people takes them in to claim and gives them a meaning and a function that is useful for the moment. The starting point is that the users, in this case youths, defi nes urban furniture as something signifi cantly more than traditional park furniture, bicycle racks and waste baskets. This paper aims to investigate how the city?s furniture can be developed to meet the youths need to see each other, move and make their marks in the public room. The theories about how youths uses the city are presented in the Theory chapter.