Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

The task of making a correct application for B- activities is the foundry time consuming task. Information and facts concerning your entire business activity shall be attached into a description of environmental consequences, which will be the basis for the decision making whether the activities shall be granted a permission to practise environmentally hazardous actions or not. When the Environmental Act were established 1999, the permission process became more extensor. With this study I want to give an insight about how these applications are made. The methods I have used to collect information are a study literature where the Environmental Act has been the focus, and qualitative interviews with two County Administrative Board. I used the Environmental Act to understand why permission is needed and the interviews to give me insight in how the work is done. My conclusion is that it is very unusual that an application is granted without complements.

This degree thesis is based on an assignment from BEOMAT in Storfors. BEOMAT is a company that constructs and sellsclay pigeons to both the national and international market.Our main purpose with this paper is to find a solution/system that can replace the expensive and space demandingOlympic trap facility. Our solution will replace fifteen clay pigeon throwers with one automatic thrower whosimulate all throwers together. The system will be provided with an appropriate control system for mass productiontherefore this system needs to be user-friendly so no previous knowledge is required.Totally 405 different throw coordinates will be stored in the programme in nine different subprograms. According tothe Olympic-rules the throwers should coincidence within certain specified conditions, this will be solved with anrandomizer in the programme.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

Because of the increasing trends in energy consumption and increased environmental awareness, greater focus has been placed on improvement and development of renewable energy sources. An already proven and accepted method is biogas production from anaerobic digestion at municipal wastewater treatment plants.In the waste water treatment process solid material and dissolved pollutants are separated from the water, forming a sludge. The sludge is separated from the process and stabilized during anaerobic digestion or aerobic aeration. Most often, mesophilic anaerobic digestion is used. Because of degradation by microorganisms, biogas with a high content of methane is formed during the digestion.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

Certain types of waste, e.g. bottom ash originating from municipal solid waste incineration (MSWI bottom ash) can be used as road construction materials. A potential problem is the possibility of substances leaching out of the road and spreading in the surrounding groundwater.The aim of this master?s thesis is to conclude whether hydrogeological type settings can be employed to, based on local conditions, provide an estimate of the probable spreading of these substances in the surrounding groundwater, and whether certain types of soils can be identified as being less suitable for the localization of a MSWI bottom ash road. A hydrogeological type setting is defined as a mappable unit with similar hydrogeological properties.

Arbetsplatsernas ständiga utveckling och förändring har lett fram till ökade psykosociala krav från de anställda som företaget måste bemöta. Ska man bedriva ett hälsofrämjande arbete bör hänsyn tas till hur kulturen ser ut på arbetsplatsen. Samlade värderingar och verklighetsuppfattningar kring hälsa skapas när individer samverkar med varandra och omvärlden, detta kallar vi ?hälsokultur?. Syftet med studien är att beskriva hur hälsokulturen ser ut på ett företag och vilka möjligheter och resurser som finns på företaget för att utveckla denna.

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

The building sector accounted for around a fourth of the total energy usage in Sweden in year 2010 (Energimyndigheten, 2012). Therefore it has become very interesting to achieve a lower energy usage in residential buildings. One way to achieve that is to build so called passive houses. By being very well insulated and have low leakage through the walls, they can reduce the energy usage for heating with a substantial amount. The first passive house was built during the 90?s in Germany; and in Sweden the first passive house was built in Gothenburg 2001.

Med ökad fokus på miljöpåverkan och bränsleekonomi vill Volvo Construction Equipment öka verkningsgraden på sina anläggningsmaskiner. På avdelningen för drivlineutveckling jobbar man bland annat med att sänka förlusterna i växellåda och hjulaxel på hjullastare och dumper. För att underlätta detta arbete har en simuleringsmodell som beskriver förluster i hjulaxlar tagits fram. Denna rapport beskriver framtagning av modellen, verifiering av modellen och vilka framtida användningsområden modellen lämpar sig för.Simuleringsmodellen är uppbyggd av ett antal komponentmodeller. Komponentmodellerna innehåller formler för respektive komponent i hjulaxeln.

I was assigned to the thesis as part of a project GMA AB (Ground Machinery Applications AB) is running. The project aims to develop a new method for injection of drilled holes in rock walls. Currently, the injections usually involve cement but the basic idea of the project is to replace cement with a supplement called Silica sol.Silica sol is known as a gelling liquid. The gel time is controlled by a mixing of saline. Depending on the amount saline that gets mixed in, the gel time varies.

This thesis was commissioned by Tekniska verken, Energy Division with the overall aim to investigate the concept of environmental debt and what it means for a business. Furthermore, a sustainable risk and responsibility investigation shall be carried out on the concerned areas. Finally, the priority areas shall be highlighted and proposed actions presented. The Swedish Environmental debt concept was presented in 1992 by Arne Jarnelöv. Environmental debt is defined as restoration costs for environmental damage. In the early days the concept did not take into account who was responsible, but the environmental debts was regarded as a humanity debt to future generations.

Bakgrund: Produktutvecklingsprocessen har på senare tid kommit att ses som en strategisk aktivitet som är avgörande för företagets överlevnad eftersom produktens utförande och kostnader till stor del fastställs innan tillverkning påbörjas. ?Target Costing? har sitt ursprung från Toyota i Japan och är en metod för strategisk kostnadsstyrning som har vuxit fram för att tidigt styra kostnader. Metoden används för att integrera kostnadsstyrning i produktutvecklingsprocessen i samstämmighet med kundkrav och företagets egna vinstkrav.Syfte: Syftet med studien är att beskriva och analysera hur ?Target Costing? används i produktutvecklingsprocessen på Volvo Construction Equipment i Braås för att ge kunskap till nya potentiella användare.

This final thesis contains three major parts, which all have been time demanding:* Designing and construction of a small wind turbine.* Designing and construction of an electrical system.* Thesis with fundamental facts about wind, wind power and design.The thesis contains basic theory in wind power and the energy systems it can be combined with. Different types of wind turbines, which components they consists of and important issues to consider when designing is also mentioned. In the end of this report the technique of our wind turbine will be presented. In the end you can also read about our experiences during the time of designing and construction..