This investigation?s task was to map manufacturing of special qualities at Stora Enso Packaging under a certain period, analyze if rules concerning special qualities is followed, which consequences this results in concerning use of paper, waste and costs and to give suggestions on alternative solutions. The goal was to give sugges-tions that help the company to reach its business ratio that the production de-partment uses within use of paper and productivity in the corrugated cardboard machine.Stora Enso Packaging is a part of the forest group Stora Enso and is one of Swe-den?s leading producers of corrugated cardboard. Stora Enso Packaging acts pri-mary on the Swedish market, where they have a market share of 25 %.To be able to analyze orders with special qualities we did a data collection during two months, where we mapped incoming orders.

The task in this master thesis was to design and construct a prototype of a satellite antenna driver unit. The unit is to be robust and work in cold weather down to -40°C, so that it can be mounted on the roof of a minibus. A microcontroller controls the H-bridges simultaneous, each connected to an electrical motor. Hardware and software protections were implemented to ensure that the antenna can not turn outside its allowed area and risk breaking. The unit can output voltages at many different levels and communicate at a multitude of signal standards..

The purpose of this work is to find out if the suctionvalve to the salivaejector for dental equipment in a simple way can be improved or if a new design is needed. The result of the examination of the suctionvalve shows that the friction between the piston and the seal is high and that this causes the valve in a few cases sheaves. The study concluded that only small changes in material or detail, improve the component..

The aim of this bachelor thesis has been to investigate some of the materials present in and onprinted papers which might be suitable for analysis. A brief history of paper making and somepigments were studied after which the theory of some of the available methods for technicalanalysis were summarized. Two works of art on paper were chosen for a closer examination,both are woodblock prints but of different composition and origin. The investigation wasmade to exemplify some of the common techniques applied on works of art. There were twoaims in these examinations.

The incineration of waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

The horse has been domesticated for several thousand years. It has gone from being used primarily for food and transportation, to become one of the most popular pets in Sweden. With over 150,000 practitioners, horseback riding is one of the biggest sports in Sweden and there is a variety of specializations to choose from. One orientation is western riding which is a broad sport with several disciplines where most originate in cattle work and other ranch tasks. Western riding is a growing sport in Sweden with an increasing number of practitioners and with many different organizations and associations, it is important that the correct knowledge of the equipment used is disseminated. Artificial aids are available in a variety of designs and the most common variants used by western riders in Sweden is draw reins or some forms of martingale.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

People in today?s society are becoming more and more aware of how important it is to use energy as efficiently as possible. This is clearly noticeable by an increase in home produced heat with e.g. solar panels or heat pumps heating systems. These changing customer demands forces district heating technology to be redesigned, which is why there is an ongoing research regarding the next generation of district heating - low temperature district heating (LTDH).

Outages in the electric grid can be costly for society. Because of this, reliability is one of the parameters used to regulate network companies. Reliability in electrical grids can be measured with SAIDI, system average interruption duration index, which for Fortum Distribution has increased in Stockholm?s distribution network (11 kV) in the early 2000?s.By using outage data for Stockholm from 2011-2013, sets of parameters to be used for reliability calculations in the network information program Tekla NIS were derived. Two different options for investment were then analysed: changing old cables with high fault frequencies, and installing automatic switching in distribution substations.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

Syntesdesign AB is an academic company that is supposed to enter the HIV drugmarket by manufacturing a "me-too"-drug with indinavir as the starting substance.Our task is to find 100 potential indinaviranalogues. Our further task is to suggesthow to perform a bondingassay to test the affinity for all these analogues. We willpresent a method, required equipment and calculated costs for the assay..

This study has been carried out in the spring of 2014 on behalf of PQR Consult AB in Stockholm. The aim of the study has been to analyse the energy usage of the building Skarpövägen 1 in order to explore the possibilites of saving energy by using appropriate equipment. These possible solutions have been simulated by using the programe IDA Indoor Climate and Energy, combined with a life cycle cost analysis. The laundry building, Skarövägen 23, has also been analysed due to its high amount of energy usage. The result of the energy analysis showed that the energy usage was much higher than the energy declaration.

Våren 2011 beslutade Röda Korset i Sverige att sluta skicka skänkta kläder som bistånd till katastrofområden. Röda Korset ställdes nu inför frågan vad de ska göra med de skänkta klä-derna för att omvandla dem till en resurs.Uppdraget var att i samarbete med Zäntrumprojektet och Röda Korsets secondhandbutik Ku-pan förädla de skänkta kläderna på ett miljövänligt sätt. Tanken är att Zäntrumprojektet ska sy om de skänkta kläderna till nya produkter som sedan ska säljas i secondhandbutiken Kupan.Syftet med den här uppsatsen är att finna ett sätt att förädla de skänkta kläderna och skapa nya produkter av dem. Vidare ska de skänkta kläderna skapa bättre resurser till Röda Korset som de kan tillgodogöra sig i sitt välgörenhetsarbete. Produkterna ska vara skapade på ett sådant sätt att de avger minsta möjliga avfallsmängd, främjar hållbar utveckling samt är attraktiva för Röda Korsets secondhandbutiks kunder.

This study was a final thesis, for the bachelor program in civil engineering at theUniversity of Uppsala, which was made on behalf of Riksbyggen in Uppsala. Acomparative study of two stain renovation methods; tradition pipe replacement andrelining was done with an environmental perspective. A simplified life cycleassessment (LCA) was done according to the International Organization ofStandardization (ISO) with the LCA tool Eco-indicator 99, in order to be estimate theimpact on the environment. LCA is a method that follows a product or a system?from the cradle to the grave?, which means that all the environmental impact over alifetime is considered.The work was executed by using a stairway with nine apartments in a house called?Uppsala Hus 9? as a reference object, which was provided by Riksbyggen.