Första januari år 2013 trädde den senaste versionen av MARPOL Annex V i kraft. Denna studie har genom en litteraturstudie samt intervjuer med nautiska befäl sökt svar på vilka förändringar som skedde, hur dem implementerats ombord samt hur förändringarna upplevts av sjöfarare. Syftet med studien var att bidra med en pusselbit till bilden av hur avfallssortering utövas till sjöss samt hur arbetet med det upplevs. Litteraturstudien kom fram till att den stora skillnaden är att papper, glas, metall samt aska inte längre får slängas i havet. Inom specialområde får endast matavfall destruerat genom avfallskvarn slängas överbord.

The aim of the study was to map the extent of Fe, Cu, Pb, As, Zn and S contamination in the area surrounding the Nasa silver mine. The mine operated between 1635 and 1810 with some prospecting performed in 1889, and has become infamous for the gruesome ways that the indigenous people were treated during the early years of operation. This study tested three hypotheses through a geochemical survey: 1) sulfide oxidation is still active in the abandoned mine, 2) the soil downslope of the mine is contaminated by mine drainage, and 3) the stream downslope of the mine is affected in the same way. All three hypotheses were valid, as the results showed that still, >200 years after mining operations ceased, signs of the historical mining are clearly visible in the surrounding environment. Acidic conditions were discovered in surface waters close to the waste rock piles, which indicates active sulfide oxidation.

The purpose of this essay is to examine the impact on children playing at a preschool yard that is designed with traditional playground equipment, and a nature-like yard without traditional playground equipment. How these respective environments influence children?s play, which other factors in the external environment that affect the game and whether the theories in the literature correspond with the results were important questions for the essay. To answer these questions a case study was applied onto two specific preschool centers, both located in Malmö. Through literature studies, inventories, observations and interviews with staff and children, a picture become clear of how the children use the yard and how their play is affected by the design of it.

Treatment wetlands been showed efficient for reducing pollutant in waste water. In Lajeado ? RS, Brazil the landfill has poor leachate water treatment. It is necessary to supplement the treatment plant because they need to reduce BOD, COD and nitrate of the water going to recipient. A subsurface flow wetland (SSF) can be a good choice.  In order to be able to design an efficient SSF it is important to understand how the grain sizes of a substrate affect the reducing of pollutants in waste water.

A future expansion of wind power in the Nordic power system makes the balancing for the transmission system operator Svenska Kraftnät (SvK) more complicated. Up to the hour of delivery the balance responsible parties? (BRP) makes prognoses and plans, for consumption and production, to help maintain the balance in the electrical grid. How well this is accomplished is affected by the setup of the market design. Therefore SvK has proposed the following possible changes in market design: Increase the imbalance costsIntensify the regulation of imbalancesIncrease the temporal resolution on the different marketsPresent the prices for balancing power in real-timeModify the balancing market to simplify auction of consumption bidsA mapping over the BRPs? processes within planning and trading on the day-ahead, intra-day, and the balancing market has been performed in this thesis.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

The aims of the following project has beento make a proposition how to create aspecific kind of transformer. Thefollowing report evaluates the differentimportant variables and contains asuggestion for a possible design. Intheory it's an ordinary transformer that'ssuppose to transform electrical effect toa high voltage line. The design of thetransformer is using an already existingcurrent transformer design and is adjustedto work for it's specific purpose. Theproject also contains the developing of atransformer simulation model that will beused to evaluate and optimize thedimensions of the resulting transformer..

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

Background:IT development has in recent decades been fast progressing. In Sweden many schools have begun to invest in IT and new technologies. What happens at the schools that are investing in IT equipment and modern technology?Purpose:The purpose of this study is to elucidate the conditions for and the success factors and barriers that principals and teachers will experience in IT. Principals' experiences are complemented and mirrored against the teachers.

Denna studie avser att ta reda på om någon förändrad effekt kan fås gällande bränsleförbrukning och emissioner då dieselolja strömmar igenom ett magnetiskt fält innan det förbränns i en dieselmotor som driver en generator. Utrustningen som ger upphov till magnetfältet har tillhandahållits av ett kommersiellt företag. Studien består av två delar, en teoretisk del och en praktisk del. I den teoretiska delen presenteras tidigare vetenskapliga studier inom ämnet samt hur tillverkaren av utrustningen menar att tekniken fungerar. I den praktiska delen har tester gällande rökgasemissioner och bränsleförbrukning gjorts.

The aims of the following project has beento make a proposition how to create aspecific kind of transformer. Thefollowing report evaluates the differentimportant variables and contains asuggestion for a possible design. Intheory it's an ordinary transformer that'ssuppose to transform electrical effect toa high voltage line. The design of thetransformer is using an already existingcurrent transformer design and is adjustedto work for it's specific purpose. Theproject also contains the developing of atransformer simulation model that will beused to evaluate and optimize thedimensions of the resulting transformer..

The intention of this final thesis is to examine how to create a schoolyard that inspires children at the age of 6 ? 12 years to play and give them possibility to develop. To get a lot of knowledge in this subject, I have combined studies of literature with practical studies at Hosjöskolan in Falun. During my practical studies I have done interviews, walks in the area with the children and visited other schoolyards. I have based a design proposal for the schoolyard of Hosjöskolan on these studies.

The number of wireless networks has increased rapidly among both home users and companies in just a few years. That has brought a lot of good things with it, for example the possibility to connect wireless equipment to the network or Internet from an arbitrary position within range of the accesspoint. But since the transmissions take place through the air some new security risks appear. It?s difficult to restrict the signals to a specific space and thereby a lot easier for unauthorized to eavesdrop or disturb the signals compared to a traditional wired network.

VBG Produkter AB is a process-orientated company that develops, manufactures and markets trailer couplings with belonging coupling equipment, protection equipment against skidding and stands for wagon-bridge for heavy vehicles. The company feels that their set-up time in production for couplings is not at an acceptable level. Due to high demands of customer oriented production the intermediate stock level of included products within the assembly of couplings has gradually increased which has resulted in high inventory holding costs. VBG Produkter applies Kanban in their production, therefore it is important to produce exactly the necessary amount and avoid overproduction. The objective of this project is to suggest appropriate solutions so that VBG Produkter is able to reduce their set-up time in assembly of couplings, by identifying internal and external set-up time for the chosen process bushing cell.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.