This thesis has been carried out on behalf of IV Produkt AB and intends to set an average ratio of thermal energy losses in apartment buildings that were built during the 1960-1990. This shall be derived by analyzing the total district energy consumption that has been divided into three parts: heat energy losses (the actual heating requirements), the heating of domestic hot water and heating energy consumption for the controlled ventilation.Three different residential areas that were built during the years 1962-1966 and one that was built in 1993 has been analyzed. All residential areas are located in Växjö urban and contains between four and six apartment buildings.The analyzed objects have a mechanical exhaust ventilation systems and district heating as the heating method. No own laboratory work or experiments have been done in this thesis, the calculations have been done on the basis of parameters from VEAB, interviews with property managers, and literature studies. By calculations, we have got a result that is reported in Chapter 6.

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

Most of the portable electronic devices use a battery as a primary power source. Nowadays, when the applications are becoming smaller and smaller and more power efficient, the designer needs to concentrate more on reducing power consumption, using secondary power sources and introducing power storage devices. Multiple power source availability and a power storage device on the board will make the applications much more useful and efficient in everyday use. This thesis proposes a power supply unit (PSU) for wireless sensor platforms which is capable of supplying a sensor node with energy from multiple sources, as well as status information from the PSU. Present power storage devices, like electric double-layer capacitors (EDLCs) and batteries, have become more and more common as their characteristics have developed.

Verket Pose kretsar kring frågeställningen vad det är att vara kropp i en rumslig situation. Verket består av sju textila föremål som på olika sätt förhåller sig till kroppen och söker etablera en relation till betraktaren, bäraren och det omgivande rummet..

Bakgrund och syfte: Intresset för enteral administrering av probiotika i förebyggandet av infektioner och diarré har på senare tid ökat. Nosokomiala infektioner och diarré är ett stort problem hos intensivvårdpatienter.  Syftet med denna studie var att undersöka hur enteral probiotika påverkar sjukdomsförloppet hos intensivvårdspatienter, med avseende på mortalitet, infektioner totalt, ventilatorassocierad pneumoni (VAP) och diarré.Metod: En systematisk litteraturstudie med sökning i Pubmed och Cinahl genomfördes med följande Meshtermer; probiotics, lactobacillus, critical illness och intensive care unit. Därefter genomfördes en metaanalys av randomiserade kontrollerade studier, utförda på vuxna intensivvårdspatienter, där man jämfört patienter som erhållit probiotika med patienter som fått placebo eller annan behandling.Resultat: Totalt 15 studier med sammanlagt 1293 patienter inkluderades. Ingen signifikans med avseenden på mortalitet, infektioner totalt, VAP och diarré kunde utläsas i metaanalysen.

Saab Aerosystems have had one dominating product, JAS 39 Gripen, and one dominating customer, FMV, for a long time. The operations management system at Aerosystems is adjusted for development of Gripen and as the business unit is trying to enter new markets with other products and customer the operations needs to be adjusted to fit the development and manufacturing of these products as well.The purpose of the master thesis has been to investigate how Aerosystems is managing requirements on operations from external customers and how to make improvements within this area. The aim has been to carry out a situation analysis to identify where improvements are possible and then produce proposals for improvements through studies of literature and other business units. The thesis also include a study of knowledge transfer within the business unit to investigate how this can be applied to improve the managing of requirement on the operations.An extensive interview study has been carried out in which interviews mainly have been conducted with employees at Aerosystems, but also at Saab Avitronics and Saab Aerostructures. The reason why these business units have been examined is because they have carried out a large number of successful businesses with external customers, which also are potential customers for Aerosystems in the future.The interviews have been analysed to identify strengths, weaknesses, opportunities and threats with the present way of working.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

Preciform AB är ett legotillverkande företag i Eskilstuna som har specialiserats sig på djupdragning, svetsning, slipning och formning av tunnplåt samt ytbehandling och montering. Företaget har som en del av sin produktion montage av Scuffplate till Volvo XC90-R-design.Från 2012 kommer VCC att ändra utseende på XC90-R-design, vilket innebär för Preciforms del att det blir en förväntad ökning av dagstakten samt att det kommer ställa ökade krav på logistiken runt Scuffplatemonteringen, vilket dagens process inte är anpassad för. Syftet med det här examensarbetet, som är en del av en förstudie på Preciform är att förbättra monteringsprocessen, skapa en överskådlig hantering samt lagerutrymme för ett ökat antal artiklar av ingående material.Tidsstudier av genomloppstid, processtid, godshantering och transporter samt gångstudie genomfördes för att identifiera förbättringsåtgärder, där de olika studierna tjänade som underlag vid beräkningar och jämförelser före och efter implementering av förbättringsåtgärder.Analyser av studierna visade att en av scuffplatemonteringens sex klart avgränsade stationer hade en högre genomloppstid än de andra. Föreslagna förbättringsåtgärder har syftat till att jämna ut takten i monteringsprocessen och reducera waste.En ny layout presenterades och efter viss modifiering implementerades den tillsammans med merparten av förbättringsförslagen.Beräkningar av tillgänglig tid i monteringen visar att en annan arbetsfördelning och indelning av stationer är möjlig i ett fortsatt förbättringsarbete.Jämförelser mellan gammal och ny layout visar på en reduktion av waste i genomloppstiden med 32 procent och en stegreducering med 30 procent.En fortsatt verksamhetsutveckling kommer att reducera tid och steg ytterligare. Resultaten av vidtagna förbättringsåtgärder kan utgöra grunden för en ny förbättringsprocess enligt principerna för Demings hjul.

This master thesis is about a place that has a story to tell. Olsson?s garden came about when Mr Carl Oscar Olsson acquired a piece of land in Landalabergen in the beginning of the 1930's and at that time he started his industrious work of uniting much of Sweden's flora in his garden. Since the very beginning Olsson's garden has played a lot of different rolls in a variety of situations and meant different things for different people. Today one can find traces from Mr Olsson's life and deeds in the garden.

To provide our company a new business opportunity I have in this essay examined the economical possibilities to sell energy. I have chosen to do a case study on my own farm in this essay. The farm is focused to cropping and also have some properties for hire. The farm is situated in the village of Fjelie and that?s where the opportunity for selling heat are. Fjelie has about forty houses. The idea is to build a plant where straw is being used as fuel.

This paper is a study of corporate governances in the municipal of Stockholm. The purpose of this paper is to enlighten the problems and opportunities for the corporate governances of the wards in the municipal of Stockholm. The municipal of Stockholm is made up of 18 relatively self-governing wards, whose activities bear a resemblance to one and other. Therefore we have specified our survey to corporate governances in the ward of Skarpnäck (Skarpnäcks stadsdel), to be able to use this ward as an example to corporate governances in the entire municipal of Stockholm. The essay emanates from the important management theories: Budget, Integrated Management system (ILS), Benchmarking and Balanced Scorecard.The essay is based on interviews and a poll survey we conducted in the administration of the ward of Skarpnäck, and also based on interviews with Stockholm?s city hall.

Stump wood is a hot alternative when the heating plants demands more and more forest fuel. The aim with the study has bean to calculate the costs in four different systems for transportations of stump wood, examine if there are any differences in fuel quality for the stump wood in the different systems, analyse if the fuel quality in stump wood is affected with the time it lays by the road side and how much space the stump wood demands on the road side. To calculate the costs for the different systems a system analysis was carried out, where some of the costs were collected through field studies on Holmen Skog stump experiment and other costs were collected from literature and contacts. Data for the fuel quality study was collected from Eons heat plant in Norrköping. Data for the study of how much space stump wood takes along a roadside was collected from field studies.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

A two-factor design of experiments done on GGAB for the identification of two selected factors influence on the length of the scattering of heat exchanger gaskets. The work consists of four parts: study, choice of survey method, the performance of investigation and analysis of the results. Chosen factors on the study are considered to be the most effecting of the length distribution of seals during the production of GGAB. The study is the first of its kind both in GGAB and in the rubber industry and has an experimental nature..

This report focuses on the upper slit. The upper slit is located between the impeller andthe drive unit. The slit design depends on pump type and application. However it isuncertain why the design varies, The purpose of this report is to clarify why the designvaries and to recommend an improved slit design.A research has been done; information was gathered from interviews, but also fromsearching of databases and studies of drawings, reports and documents. The originalpurpose of the slit was to prevent twining around the driveshaft, and prevent dirt fromentering the cooling system.