Economy and environment has for a long time been studied separately and seen as incompatible. With a growing society and increasing pressure on environmental issues the need of a new economy with the environment included is necessary. This study examine if European Union´s picture of the waste hierarchy match the reality. Since the purpose with the waste hierarchy is to benefit environmental and economy. A survey was made over Käppalaförbundets waste from 2013, to see where the waste falls in the waste hierarchy.

This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.

SammanfattningEn ånganna monterades i EGR (Exhaust Gas Recirculation) slingan på en 12,7 liters Scania Euro V motor (DC1306). En modell som beskriver Rankine cykel togs fram med vatten som köldmedium i simuleringsverktyget GT-Power. Ångpannan i GT-power modellen kalibrerades m.h.a experimentell data.Simuleringarna visade att det optimala ångtrycket, det trycket där högst effekt kan erhållas från expandern, är beroende av EGR temperaturen. Det innebär att ju högre EGR inloppstemperatur desto högre optimalt ångtryck. EGR temperaturen i punkt 2 i ESC cykeln är 514? C för denna motor, vilket resulterar i ett optimalt tryck på 120 bar enligt simuleringen.

The present climate discussion has made energy efficiency an interesting topic. Saving energy does not only help the climate but also saves money for the energy consumer. The purpose of this thesis was to examine the potential of heat recovering from milk cooling. Two milk farms, one with voluntary milking system, VMS, and the other with conventional milking system was used to measure interesting temperatures and electricity consumptions. The numbers were used both to do theoretical calculations and to construct a SIMULINK model. To calculate the potential for heat at milk farms theoretical calculations were made in MATLAB using a reference farm with different combinations of heat recovery and pre cooling. The farm was assumed to keep a dwelling house with the annual heat consumption 18165 kWh.

A home for elderly is planed to be built at Zakrisdal, Karlstad, Sweden. The heat source for the building was at the time not determined. In order by the local government of Karlstad this report is meant to examine if the need of heat could be provided only by solar heat combined with a seasonal heat storage. The problem to solve is, if the need of heat from the home for elderly is provided from only solar heat, whitch dimensions of the solar collectors and the storage is needed?.

Denna studie har undersökt den praktiska användbarheten av befintliga teoretiska ramverk inom service recovery-området som utgångspunkt för att utvärdera och utveckla recovery-arbetet i tjänsteföretag. En datainsamling på ett större svenskt tjänsteföretag har genomförts med ett fokus baserat på befintliga teorier om service recovery. Det insamlade materialet har sedan bearbetats av nyckelpersoner på företaget och funnits leda till en inte oansenlig mängd insikter och åtgärdsförslag relaterat till organisationens recovery-verksamhet. Detta leder till slutsatsen att de teoretiska ramverk som beskriver service recovery-processen framgångsrikt kan användas för att styra utvärdering och utveckling av en organisations recovery-verksamhet. Information som insamlats med befintliga teorier som lins har visats vara relevant för en organisations insikter om det egna recovery-arbetet samt bidragit till utveckling av recovery-verksamheten..

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

The objective of this study is to examine the sustainability of recovering industrial wasteheat from several heat sources in a foundry constructed in a plant belonging to ITT Waterand Wastewater in Emmaboda, Sweden. A triple bottom line perspective will be appliedto achieve this objective. The triple bottom line approach takes into account ecologicaland social performance in addition to financial performance. The technology forrecovering the waste heat is a Borehole Thermal Energy Storage (BTES) which is aconstruction consisting of 140 vertical boreholes, 150 meters deep with an internal spaceof four meters.The calculated amount of energy for storage is approximately 3800 MWh annually. Ofthis amount 2500 MWh are expected to be utilized, while storage losses accounts for theremaining part.

Food waste from grocery stores - An analysis of municipal management inSweden and a detailed study of the situation in Umeå municipalityThe objective of this thesis was to analyze the municipal management of food waste fromgrocery stores in Sweden in general and in Umeå municipality in particular. Furthermore theobjective was to account for the different waste treatment methods that can be used and toevaluate them from an environmental perspective. In order to analyze the municipalmanagement a survey was sent to all of the municipalities/municipal waste companies inSweden. A general comparison of treatment methods was carried out on the basis of ascientific review and a system analysis was performed in order to compare three differenttreatment alternatives for the food waste generated in grocery stores in Umeå. The surveyshowed that the legal definition of food waste from grocery stores is unclear and variesbetween municipalities.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

People in today?s society are becoming more and more aware of how important it is to use energy as efficiently as possible. This is clearly noticeable by an increase in home produced heat with e.g. solar panels or heat pumps heating systems. These changing customer demands forces district heating technology to be redesigned, which is why there is an ongoing research regarding the next generation of district heating - low temperature district heating (LTDH).

Every business is subject to service failures. The process of correcting these failures and turning disappointed customers back into happy ones is called service recovery. This is particularly important in the hotel business, where there are many moments of truth where customers may become dissatisfied. To further complicate things, service recovery is a process where you may have to correct errors of others - people beyond your control. The research field is relatively new and there are no turn-key solutions as to how to systematically work with service recovery.

One of the most common ways to produce heat and electricity in Europe today is by the incineration of waste or combustion of coal. These materials can be very sulfurous and during combustion sulfur dioxide is produced. This is an environmental and health related toxic substance which is why power plants have strict regulations on removing it from the flue gas. Sulfur dioxide is removed from the flue gas by adding a limestone reagent. The sulfur dioxide reacts with the limestone and the synthetic product obtained is ?Flue Gas Desulfurization gypsum?.

This paper deals with challenges associated with handling scrubber waste in the port of Karlshamn and what various industry partners are doing to meet this growing demand. The main challenges have been the proportion of ships with scrubber, the amount of generated waste and waste characterisation. An understanding of these factors has been crucial in order to ascertain the aim of this study, which has been made with calculations based on leading manufacturer?s scrubber analyses and with an estimation of the quantity of ships with scrubber by examining AIS data from the Port of Karlshamn. In order to calculate the quantity of scrubber waste two different scenarios were established, which in turn produced two different outcomes.

This thesis is based on a case study for the real estate manager Mimer in Västerås. Mimer provides a great deal of this city?s rental apartments. Many of their buildings have ventilation systems with a type of heat-recovery called ?heatpipe?.