Important issues for the local authorities are what to do with the sludge produced insewagetreatment plants. The tax for landfill leads to higher costs with 250 SEK/ton. On the 31December 2004 it will be forbidden to landfill sludge.In Sweden the yearly production of sludge is 240 000 tons, counted as DS. The phosphorouscontent is 3 % in sludge. The total yearly production of sludge gives 6000 tons of phosphorous.

Hammarby Sjöstad is a new district in southern Stockholm. A main objective with the Sjöstad project was to halve the environmental impact compared to other construction work. The environmental goals involve a halved water consumption rate, a local treatment of storm water and trials aiming to extract nutrients from the waste water. Sjöstadsverket is an experimental treatment plant used for testing new treatment processes for domestic waste water from Hammarby Sjöstad. The results are to be compared with the conventional process used at Henrikdals treatment plant today.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

För att åstadkomma samarbete mellan agenter i dataspel har utvecklare under lång tid använt sig av traditionella AI-tekniker såsom skriptning och tillståndsmaskiner. Dessa tekniker har dock ett flertal problem som gör att alternativa tekniker där samarbete istället evolveras fram blir intressanta att studera. I detta arbete har effekterna av egenskaperna begränsade synfält, brusig indata samt hinder på evolution av samarbete med en sådan teknik, Multi-Component ESP, utvärderats.En experimentmiljö utvecklades baserad på samarbetsproblemet CMOMMT. I denna miljö utfördes sedan fem olika experiment där respektive egenskap först testades enskilt och sedan alla tre i kombination. Resultaten av dessa visade att ingen av egenskaperna enskilt har någon effekt men däremot att kombinationen av alla egenskaper har en stark negativ effekt på evolutionen.

Titel: Waste Management ? Förbättringsförslag av återvinningsprocessen inom hemelektronikbranschen. Bakgrund: I en bransch som kännetecknas av snabb teknologisk utveckling är det viktigt att se till att de produkter som kommer ut på marknaden också tas om hand på ett bra sätt i slutet av sitt funktionella liv. Hur ser återvinningsprocessen hos företagen ut idag och vad kan göras för att minska de växande problem som framkommer i samband med den ökade konsumtionen? Genom att granska fenomenet Waste Management avser uppsatsen angripa slöseri i logistikflödet och finna förbättringar av dagens återvinningsprocess av uttjänta hemelektronikprodukter.

This degree project includes both a theoretic component and a practical component within the graphicprofiling domain. Literature on graphic design has been studied for the theoretical part and the achievedknowledge has been used for the practical part. The project has been to produce graphic materialfor ?Rookiefestivalen? in Hultsfred.In modern society it is important for a corporation to distinguish itself from others by using a graphicprofile. Through using a graphic profile the company can have an affect on how it is perceived byothers.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

LKAB is an international high tech mineral corporation and a world leading manufacturer of refined ironore products for steal manufacturing and other mineral products destined other industries. LKAB is an international corporation with companies world wide, with it?s main location in the north of Sweden, which is where the iron ore mines and the refining works are located. LKAB?s iron refining process in Vitåfors, Malmberget, is a source of great amounts of waste-rock.

The main purpose of this project was to make a survey of the steam and electricity consumption at Akzo Nobel Functional Chemistry AB and give suggestions of how to minimize them. These three different areas were focused on. First to make a survey of all the most important consumers, second to find the electricity consumption of the air compressors and the amount of waste heat produced from them. The third area was to calculate a model of how much fresh water that is used during a cooling sequence in the water based heating/cooling system of the reactors and give a suggestion of a suitable reuse for this water.The main result is a total survey of the energy consumption in steam and electricity. The survey shows that the second largest group after drying is heating of ventilation which gives big potentials of reducing the total steam consumption if there is a way of being self supporting in ventilation heat.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.

The biogas plant Kungsängens gård, owned by Uppsala Vatten och Avfall AB, produces biogas and biomanure from organic household waste, food processing waste and slaughterhouse waste. In year 2012, 4.4 million Nm3 of biogas were produced from 25 200 tons of waste. Before digestion all substrate is sanitized by pasteurization at 70°C in order to kill pathogens. Another method, integrated thermophilic sanitation (ITS), is of interest in order to decrease the energy demand. The method implies that the substrate is sanitized during ten hours in the digestion chamber, where the temperature is 52°C.

The population growth and urbanisation in low-income countries bring issues of poor living standards and miserable sanitation conditions onto the agenda. If well-functioning waste management systems were developed, this could master some of the problems. The already existing local informal waste handling system that is common in many low-income countries, needs to be developed with proper sorting and composting solutions to decrease the environmental burden and improve the overall situation in the dense cities. This master?s thesis project is performed with the intention of developing functional decentralised waste management units in the city of Pune, India.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

The biogas plant Kungsängens gård, owned by Uppsala Vatten och Avfall AB, produces biogas and biomanure from organic household waste, food processing waste and slaughterhouse waste. In year 2012, 4.4 million Nm3 of biogas were produced from 25 200 tons of waste. Before digestion all substrate is sanitized by one hour?s pasteurization at 70°C in order to kill pathogens. Another method, integrated thermophilic sanitation (ITS), is of interest in order to decrease the energy demand.

The concept of sustainable development has been pervasive in recent years and many organizations choose to implement sustainability and adapt their activities accordingly. The purpose of this study have been to explore how a collaboration on the use of waste materials may look to analyze what influences cooperation. A case study has been carried out examining a Swedish state regional project aimed at creating partnerships between actors and utilizing textile waste with the help of design. The study was conducted using qualitative methods and the collection of data has been done through interviews and by examining documents. The results show that there are seven key factors that affect cooperation: expectations, commitment, internal communication, a strong non-profit actor, individual treatment, personal networks and the diversity of actors.