This thesis presents the theory behind prototyping and user interviews as parts of requirements analysis. It further discusses how these were used in the development of a budget planning application. The implemented Web-based solution uses a new component-based design rooted in a Model-View-Controller architecture. The application is used today with complete success at the Department of Computer and Information Science at Linköping University..

The purpose of this study is to ? through a discourse analysis ? examine how the parliamentary committee ? Ansvarskommittén ? legitimizes the need for merging administrative regions. The committee?s investigation is what underlies the present debate on regionalisation and the merging of regions in Sweden. To carry out this discourse analysis, I have used ?What?s the problem represented to be??, by Carol Lee Bacchi as an analytical framework.

Global warming is a huge issue that humans have contributed to through over-exploitation of natural resources and extensive usage of fossil fuels. Now more than ever, we need to embrace a recycle thinking and reuse our waste, for example through producing biogas from our food waste. The purpose of this report was therefore to identify the energy usage and emissions resulting from the biogas chain which spans from Solna Stad to Uppsala Vatten. Furthermore, potential efficiency improvements were to be identified and proposed. This report focused mainly on the first part of the biogas chain that includes the collection of the food waste and the reloading process.

The municipality of Västervik, with support from Envipro Miljöteknik AB, is carrying out a main study of the minefields at Gladhammar. Mining of iron, copper and cobalt under different periods from the 16th century until the end of the 19th century has led to discharges of metals to the lakes situated downstream. The aim of the main study is to investigate the possibilities to reduce the environmental load on the surrounding ground and water caused by heavy metals from the mine. The present report is a part of the main study. The aim of the work is to investigate the geochemistry of the groundwater.

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.

The purpose of this thesis has been to determine experimentally how good a peltierelement is to convert waste heat from wood burning. Three different peltier elementswere used in a comparison study. The comparison was mainly done to know howmuch power could be obtained from each element. Even, a circuit with a step-upfunction has been created to give a higher output voltage than the peltier elementitself. The result of the experiments was a low output power, the highest valuereached 2.18W.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

Perfluorinated substances (PF) are environmental pollutants that are used to coat fibres of so called ?all weather clothes? to make them water resistant. PF are effectively spread through water. Waste water treatment plants (WWTPs) are a pollutant source of these substances. PF are poisonous to different kinds of organisms, and supposedly also to human beings, if concentrations are sufficiently high.Perfluorinated substances have been investigated at three waste water treatment plants in Stockholm during the 2000?s.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

AbstractThis is a study of present day dogs with the purpose to establish a method to investigate archaeological dogs and determine their use in the past. The study has focused on measurements of five bone elements, scapula, humerus, radius, ulna and femur. A principal component analysis has been applied in order to decide which measurements to be further used in the analysis. Different proportions have been calculated on these measurements.A test to try the method has also been done on bones of a wolf and a dog without known background. The results from the different elements are positive, and they narrow the field down to two dog types of which one is more likely to be true than the other.The final results show that, although over lapses between the four different dog groups; hunting dogs, guard/work dogs, sled dogs and shepherd's dogs exists, it is possible to distinguish different dog usage from the proportions of the bones..

A rhetorical analysis of the educational interactive film ?Riskprofilen?, produced by the Swedish Civil Contingencies Agency (Swedish: Myndigheten för Samhällsskydd och Beredskap). This essay uses the theories and methods of Procedural Rhetoric, as described by Professor Ian Bogost, and Visual Rhetoric, as described by Professor Brigitte Mral to analyse the interactive and visual component parts of the artefact, and compares them to the intended purposes of the artefact as stated by documents pertaining to its creation, found to be those of educating the public; marketing the agency; and driving traffic to its webpage. The artefact is through analysis found to fulfil the purposes of marketing the Agency and of likely increasing traffic to the website upon which it is hosted. Regarding the primary, educational purpose this analysis finds that the artefact does not teach a user the accident-avoidance strategies it claims to do, but is dependent upon further materials..

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.

During the last years the need for real-time database services has increased due to the growing number of data-intensive applications needing to enforce real-time constraints. The COMponent-based Embedded real-Time database (COMET) is a real-time database developed to meet these demands. COMET is developed using the AspeCtual COmponent-based Real-time system Development (ACCORD) design method, and consists of a number of components and aspects, which can be composed into a number of different configurations depending on system demands, e.g., Quality of Service (QoS) management can be used in unpredictable environments. In embedded systems with requirementson high up-time it may not be possible to temporarily shut down the system for reconfiguration. Instead it is desirable to enable dynamic reconfiguration of the system, exchanging components during run-time.

Sweden will, in accordance with the EU-directive 2003/54/EC, move from post-regulating the electricity power grid-tariffs by using a fictitious grid, to a regulation in advance which uses the actual power grid as a starting point. For this purpose a component breakdown of the grid needs to be made to determine the value of the network and by that the tariff price that is reasonable for the network business in question to charge.The primary breakdown criteria is the voltage-level and type of region. Voltage-level is crucial for the cost and complexity of a grid-part, because the higher the voltagelevel is, there are more and stricter laws and rules to follow. This work is limited to the distributionpart of the grid, in other words voltage levels from 20 kV and below.The type of region is crucial to the type of components you can and want to use. In city environments both overhead-wires and independent substations are undesirable for both practical, safety and aesthetic reasons.