Abstract (in English)During the last fifty years, the waste in an average Swedish household has increased by about five hundred percent. In order to manage (eller take care of) all of this new waste, Swedes need a method of facilitating the handling process. In this report, both the habits and needs among private households across Sweden are investigated, followed by a pertinent solution to the waste problem. This solution is a container with two compartments, using the standarddimensions of a grocery store paper bag..

The purpose of this study has been to make an inventory of combustible waste in the region around Norrköping and to investigate the composition of domestic waste, industrial waste and two different types of sludge. The work was performed at the request of Norrköping Miljö & Energi, due to the planning of an incineration plant. The inventory of the waste was performed through inspection of environmental impact reports, from waste disposal plants in a number of local government areas in the region. The quantities were also compared to another inventory, carried out in a different way. The characterisation of the wastes was compared to the fuel specification determined by Norrköping Miljö & Energi.

As a small and land scarce country, effective Waste Management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

The population growth and urbanisation in low-income countries bring issues of poor living standards and miserable sanitation conditions onto the agenda. If well-functioning Waste Management systems were developed, this could master some of the problems. The already existing local informal waste handling system that is common in many low-income countries, needs to be developed with proper sorting and composting solutions to decrease the environmental burden and improve the overall situation in the dense cities. This master?s thesis project is performed with the intention of developing functional decentralised Waste Management units in the city of Pune, India.

The purpose of this report is to increase the awareness about the problem that occur when the waste hierarchy is applied to management of contaminated land. The work with remediation of contaminated land in Sweden is part of the efforts towards reaching the national environmental objectives. Therefore a subsidiary aim is to analyze how this influences the prospects of reaching the objectives. The work consists of two parts; a case study and a comparative literature study that focus on England, the Netherlands and Sweden. The case study is intended to provide a practical perspective through a comparison of the climate impact from two methods.

Environment and sustainable development are very current topics in today's society, bothnational and international. The government's bill 2004/05:150 ?Swedish environment objectives - a common commission? contains several environmental quality objectives, that in turn is divided up in smaller secondary objectives. One of the secondary objectives says: ?Latest year 2010 shall at least 35% of the food waste from households, restaurants, largescale kitchens and shops be recycled through biological treatment.

This project operate an environmental assessment of total waste was conducted by using a life cycle assessment (LCA), that examines the environmental benefits of recycling production waste from Atlas Copco at Stena recycling. Atlas Copco is a company engaged in the development and production of rig-mounted hydraulic breakers and handheld air breakers and handheld motorized rotisserie. Stena recycling is a recycling company engaged in recycling, processing and refining of metals, paper, electronics waste and hazardous waste.The purpose of this study is to focus on Stena customer Atlas Copco and evaluate environmental benefits between to recycle and not to do it. The result shows that the total energy gain, resulting from the recycling of waste fractions, lands at 6 990 089 MJ, corresponding to drive 3 times around the Equator with a truck (40 t). The result shows that recycling 3040 kg paper provides an energy gain of (38 600 MJ) compared with burning paper (19 500 MJ) is 19 100 MJ, which corresponds to heat a house for 11 weeks.

In October 2010 it was discovered that leach water had been released from a waste deposit directly into a ditch during a period from March until October 2010. The river Dalhemsån runs close to the waste deposit, just about 10 meters from the ditch. By studying the benthic fauna it was discovered that the environmental status of Dalhemsån is bad in this part of the river, but the discharges of leachate from the waste deposit does not seem to have deteriorated the water further since May 2010..

People of the modern world consume more than they ever used to do. Because of the close correlation between consumption and the amount of waste, the waste volume is also expected to increase. The purpose of this study is to examine if some measures in the recycling process from Sweden could be implemented in Indonesia. In fact, Indonesia is one of the countries in which the Waste Management system is struggling. Tetra Pak, one of the world leading producer of food packaging, is studied in this report.

One of the most common ways to produce heat and electricity in Europe today is by the incineration of waste or combustion of coal. These materials can be very sulfurous and during combustion sulfur dioxide is produced. This is an environmental and health related toxic substance which is why power plants have strict regulations on removing it from the flue gas. Sulfur dioxide is removed from the flue gas by adding a limestone reagent. The sulfur dioxide reacts with the limestone and the synthetic product obtained is ?Flue Gas Desulfurization gypsum?.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

Organic material used for biogas production can also undergo other treatments. The emissions and impact from the different treatments are evaluated in this environmental assessment, with a focus on energy and climate. The materials included in the study are organic household waste, slaughterhouse waste and liquid manure. Other than biogas production, the possible treatments for organic household waste and slaughterhouse waste are incineration and composting, and for liquid manure storing and spreading. The analysis is based on data and information from current and relevant literature, and relates to the conditions in the Swedish energy system.

A variety of food is produced and passes the whole chain by processing, transport and trade and finally it ends up with the consumer. But in many cases, the food is disposed before it is eaten. Some of the produced food does not even pass the whole entire chain before it turns to waste. The question about food waste in debates is a case of access to food for every human beeing. It is question of consumption of the resources, Waste Management and an issue of environmental impact.

Solid Waste Management is one of the most essential functions in a country to achieve asustainable development. In India, it has been one of the least prioritized functions during thelast decades. The most common ways to treat waste in India today are open dumping anduncontrolled burning. These methods are causing severe environmental pollution and healthproblems. India is one of the world?s largest emitter of methane gas from waste disposal.Since methane is a strong greenhouse gas, even small emissions have large impact on theclimate.

This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.