Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

The electric car has existed for over a century and producers has tried to commercialize it earlier but has not succeeded. In recent years, however, a change occurred that may be significant for the electric car and it is now to commercialize in the market of passenger cars. The technology has in recent years elaborated as more car manufacturers have started to invest in development in the subject field. This thesis aims to compile an action plan for the development of charging infrastructure for electric vehicles in Uppsalahem ABs residential areas. It is based on a survey of different residential areas and a survey of charging infrastructure.

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.

The aim of this report is to discuss computer security in handheld computers and to find out the appropriate security level that must be implemented to be able to use handheld computers within the Swedish healthcare system. Most healthcare centers are using some kind of electronic journals for their patient´s data today, but there are still a number of clinics that are usingthe old paper-system. On a few places in Sweden the use of handheld computers at the clinics has already started, but in the United States the use of handheld computers in the medical area is already widespread and from this we can see a lot of different situations where it is useful and effective to work with handheld computers. The security demands on patient´s journals are high and regulated in both Swedish law and regulations from the National Swedish Board of Health and Welfare. The law does not have any substantial demands, but states that there should be an adequate security level based on the nature of the information and the costs.

Detta examensarbete syftar till att utreda vilka skillnader som råder mellan livslängdsprovning för transmissioner i rigg respektive fält för hjullastare på Volvo Construction Equipment (Volvo CE). Hjullastare benämns maskin i den följande texten. Uppgiften har delats upp i tre delar; ? Kartläggning av riggens uppbyggnad samt vilka tester som utförs i rigg respektive maskin i dagsläget. ? Analysera vilka effekter dagens skillnader i testning har på de transmissioner som provas i rigg respektive maskin.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

This paper examines the power producing dams along the Ume-river as an integral part of and a result from the urbanization process in Sweden during industrial capitalism. The aim of the paper is to contribute to the knowledge of the urbanization process in Sweden in general and of its traces along the Ume river in the county of Västerbotten in particular. The paper applies the theory of concentrated urbanization and extended urbanization put forward by Neil Brenner and Christian Schmid (2015) and argues that the building of power producing dams along the Ume-river is part of an extended urbanization process. This becomes particularly evident when examining the vast physical structures that is the dams, situated in an otherwise remote and sparsely populated area. These vast physical structures are also very well connected to a nation wide electric grid that has connections to bordering countries as well.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

Currently, the whole globe is faced with serious problems which negatively affect people around the world: increased pollution, excessive waste, and weather pattern changes. ?Left? and ?right? wing political parties alike have embraced ?green? politics and for many of these parties, environmental issues have become a top priority that is very much reflected in their manifestos. This study examines the environmental goals of two of Sweden?s largest political parties and how these ambitions are reflected at a local level.

The purpose of this paper is to explore what objects that can be seized and how the management of a seizure should be conducted. Ability to take enforcement against an individual should be carefully weighed against the rights and freedoms that exist. Seizure is one of the various restraints that exist, and the regulation on which they appear is mainly in the Code of Judicial Procedure, Chapter 27th. To be able to apply coercive measures, it is fundamental prerequisite that a criminal investigation is initiated, but there exist some significant exceptions to this. There are also rules about who has the right to provide for the seizure, the decision can be taken by a prosecutor, an investigator, a police officer or, in special cases, the court.

The main project Dry preservation of source-separated organic household wastes involves a new technique for treatment of biowaste through drying. Investigations are going on to determine how the dried biowaste best can be used to close the natural circular flow of nutrients. The objective of this degree project is to determine if the dried biowaste can be used as a soil conditioner. By restoring the nutrients in the material to the ground, the natural circular flow is closed. A declaration of contents, including the nutrient levels, C/N ratio, pH and the electrical conductivity of the dried biowaste, was constructed and a germination test was done to make sure that the material did not inhibit sprouting.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

The purpose of this study is to examine the experiences of five students searching for information in the context of writing a bachelor thesis. The main questions regard what strategies they use whilst searching for information, their relevance judgements and their feelings. The method used is the qualitative interview. The students were doing their third term in psychology. All the students were interviewed twice while working on the thesis.