This paper examines the power producing dams along the Ume-river as an integral part of and a result from the urbanization process in Sweden during industrial capitalism. The aim of the paper is to contribute to the knowledge of the urbanization process in Sweden in general and of its traces along the Ume river in the county of Västerbotten in particular. The paper applies the theory of concentrated urbanization and extended urbanization put forward by Neil Brenner and Christian Schmid (2015) and argues that the building of power producing dams along the Ume-river is part of an extended urbanization process. This becomes particularly evident when examining the vast physical structures that is the dams, situated in an otherwise remote and sparsely populated area. These vast physical structures are also very well connected to a nation wide electric grid that has connections to bordering countries as well.

Seabased Industry AB develops system for extracting electrical energy from ocean waves with a Wave Energy Converter (WEC). The components is bought from subcontractors and then assembled into wave energy converters, buoys and marine substations by Seabased. In the future Seabased will produce more of the components themselves to reduce costs and to have better control over tolerances. The production line will also include the painting of the WECs and substations, which is performed in a painting line.The purpose of this thesis work is to study what is required to build a painting line, regarding the types of stations, transporting types and the space needed. This will result in layouts for the painting line.To receive the necessary information about production theory and corrosion and surface treatment, literature concerning this area has been studied.

Surface lift adapted for today?s user Today?s T-bar lift looks almost the same as when it was launched in 1938, even though a lot has happened in the ski and mountain industries. New equipment has developed without any major adjustment to the lift. Snowboard, sit ski and downhill biking are just some examples of the evolution that demands new seating positions. It?s also very common for families to spend their holidays in the mountains nowadays.

I detta examensarbete har en tillförlitlighetsmetod tagits fram som väger samman kostnadspåverkande faktorer för investeringar och underhåll i eldistributionssystem med kostnader förknippade med avbrott. Syftet med metoden är att möjliggöra för nätplanerare och projektörer att jämföra olika investeringsalternativ för att kunna kostnadseffektivisera investeringarna i eldistributionssystem. Med tillförlitlighetsanalys kan den förväntade avbrottstiden i systemets uttagspunkter beräknas. Kopplas en kostnad till den förväntade avbrottstiden i uttagspunkterna kan den förväntade avbrottskostnaden för distributionssystemet beräknas. Syftet med simuleringarna har varit att undersöka om det går att minimera den totala kostnaden, investeringskostnader samt förväntade avbrottskostnad, genom slumpvisa investeringar i systemets ledningssektioner. Simuleringarna har genomförts på ett fiktivt mindre system.

Det här examensarbetet har utförts på uppdrag åt Trollhättan Energi AB (TEAB). Examensarbetet är en utredning beträffande förutsättningar för sammankoppling av TEAB:s och Hjärtum Elförenings elnät.De nuvarande ledningsnäten har radialnät och det innebär att det endast har inmatning från ena ledningsänden. En sammankoppling skulle ge möjlighet till sektionerad drift vilket innebär inmatningsmöjligheter från båda ledningsändar. Det gör att ledningsnätet blir mer säkert, tillförlitligt och effektivt.Ett förslag på ett nytt ledningsnät där delar av TEAB:s och Hjärtum Elförenings ledningsnät är sammankopplade har tagits fram. Med det nya förslaget blir ledningsnätet mer driftsäkert och uppfyller lag- och myndighetskrav.Beräkningarna som ligger till grund för arbetet är teoretiskt utförda.

Together with NCC and Sweco we measured the air-flow on a semi-detached house in Jönköping. When a pressure measurement is made, the house gets exposed to over- and under pressure. This is done in order to examine the houses climate shell. The climate shell of the semi-detached house we tested exceeded the required air thickness in BBR-2002, hence, measures have to be taken.This report also displays the importance of building air thick houses and what consequences a non air-thick house can have for the ones residing the house. A discussion of different measures is on for the addressed problems with the flow-measurement and the alternative construction-solutions.Furthermore we have described in this report of how to account for the performance of the air pressure, what kind of equipment we used and how we came up with the results.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

Denna rapport behandlar automatisering av statorlindning vid monteringsline 4 för elmotorer på ABB Motors AB i Västerås. Målet med projektet var att hitta ett lönsamt sätt att automatisera delar av elmotormonteringen. Arbetet begränsades till att omfatta monteringsline 4 där motorer av storlek IEC 200- 250 monteras, dessa är de största motorer som produceras i Västerås. På grund av relativt små volymer och en omfattande variantflora måste en automatisering vara flexibel. För att nå en fungerande automatiserad lösning behövde flera praktiska materialhanteringsproblem lösas.

This project was conducted on behalf of the organization SABO (Swedish Association of Public Housing Companies). The aim of this project was to investigate which relevant environmental aspects and indicators there are for housing companies to present in their sustainability report. The project consists of three main goals: to decide if there is a need for common guidelines when conducting a sustainability report, determine appropriate environmental indicators and to create a simple model of how the companies can present them. This was done by a literature study, analysis of 13 sustainability reports and interviews with seven housing companies. The result of the project suggests that there is a need for common guidelines to, among other things, make it easier to make a comparison with other companies.

Denna rapport handlar om utveckling av ett undervisningsmaterial för elever på fordonsprogrammet inom området elektroniska styrsystem. Rapporten beskriver processen från idé fram till färdigt undervisningsmaterial. Detta har tagits fram för att ge eleverna en bredare, mer generell kunskap inom detta ämnesområde än vad som är möjligt att få genom enbart teoretisk undervisning kring utvalda märkesspecifika system.  Undervisningsmaterialet bygger på teoretiska avsnitt som varvas med praktiska övningar kring en mikrokontroller med tillhörande sensorer och aktuatorer. Genom att skapa korta styrprogram som hanterar dessa sensorer kan olika funktioner skapas med hjälp av mikrokontrollen. Detta gör att många av de delfunktioner som används inom fordonselektroniska styrsystem kan simuleras..

Electronic article surveillance (EAS) is widely used in shops and libraries together with an RF-tag attached to the goods or books in order to prevent shoplifting. By implementing the addition of a moisture sensor to the RF-tag, other functions become possible, including the ability to use as an alarm with regards to frozen goods, which have been shipped but which have melted and have, subsequently, refrozen. In- relation to care for the elderly, one time-consuming step involves checking whether there is the necessity for a change of diaper and this can, instead, be based on an RF-tag with an EAS-system alarm. A preliminary investigation was made using the moisture sensors, which involved how the resistance changes when liquid and/or heat is applied. A simulation of the LCCR circuit (RF-tag with the sensor) was conducted in order to determine how the resonance frequency changes for different resistances levels.

In the digital era, new services have entered the public libraries, like seeking information on the Internet, in databases, newspapers online etc. But many citizens do not know that these services exist. The libraries have a democratic responsibility to inform about them. In the county of Östergötland a project started in 2001 where libraries in five small municipalities built websites in which they present all their electronic services available. One of the aims was with the help of different kinds of marketing to reach special groups of people, like adult students, small companies and politicians.

EDI står för elektroniskt utbyte av data från dator till dator och sker mellan kända affärspartners. När EDI införs i en relation mellan två organisationer anses relationen bli mer komplex än tidigare. Syftet med detta arbete är därför att undersöka hur EDI påverkar interorganisatoriska relationer.Undersökningen utförs genom att studera affärsrelationerna mellan en offentlig förvaltning och tre av dess leverantörer. I dessa relationer studeras speciellt hur förhandlingsstyrkan, flexibiliteten och tillförlitligheten har påverkats av att EDI har börjat användas för den offentliga förvaltningens inköpsprocess.De slutsatser som dras är att de undersökta faktorerna förändras i takt med att EDI blir alltmer integrerat i affärsrelationerna. Initialt byggs vissa omställningskostnader upp, som ökar leverantörernas förhandlingsstyrka.

The aim with my work is to get a deeper knowledge about the preschool's views of environmental work. I also want to examine how the preschool teachers along with the children work with the project Green Flag in the preschool. I have used structured interview with two teachers in a preschool that works with Green Flag. Green Flag is an environment certification and is an evidence on that one works daily with a document aimed environmental work along with the children. I have found out that each year they work with different themes within Green Flag.