Outages in the electric grid can be costly for society. Because of this, reliability is one of the parameters used to regulate network companies. Reliability in electrical grids can be measured with SAIDI, system average interruption duration index, which for Fortum Distribution has increased in Stockholm?s distribution network (11 kV) in the early 2000?s.By using outage data for Stockholm from 2011-2013, sets of parameters to be used for reliability calculations in the network information program Tekla NIS were derived. Two different options for investment were then analysed: changing old cables with high fault frequencies, and installing automatic switching in distribution substations.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

Syntesdesign AB is an academic company that is supposed to enter the HIV drugmarket by manufacturing a "me-too"-drug with indinavir as the starting substance.Our task is to find 100 potential indinaviranalogues. Our further task is to suggesthow to perform a bondingassay to test the affinity for all these analogues. We willpresent a method, required equipment and calculated costs for the assay..

This study has been carried out in the spring of 2014 on behalf of PQR Consult AB in Stockholm. The aim of the study has been to analyse the energy usage of the building Skarpövägen 1 in order to explore the possibilites of saving energy by using appropriate equipment. These possible solutions have been simulated by using the programe IDA Indoor Climate and Energy, combined with a life cycle cost analysis. The laundry building, Skarövägen 23, has also been analysed due to its high amount of energy usage. The result of the energy analysis showed that the energy usage was much higher than the energy declaration.

The investigation analyzed the implementation and application of the Swedish National Archives' new Process-Oriented Archives Description Model to activities of the hierarchical, function-oriented and decentralized university organizations.The basic reason why a new archive description has evolved is because documents are becoming more and more digital. It requires a new interpretation of how evidence is secured for their reliability and authenticity, and a new way of looking at provenance, for the purpose of describing and searching electronic documents. The new archive description model's logical structure is based on business processes.The relationship between the new archive description and a function-oriented organization's activities can be seen from the different outlooks of processes between archive activities and activities of the organization. It is also reflected in the modification that all universities have made ??of the new archive description model to be more flexible and pragmatic to fit a function-oriented organization.The relationship between provenance and process-oriented archive description is mainly the link between documents and business processes that produce them.

Våren 2011 beslutade Röda Korset i Sverige att sluta skicka skänkta kläder som bistånd till katastrofområden. Röda Korset ställdes nu inför frågan vad de ska göra med de skänkta klä-derna för att omvandla dem till en resurs.Uppdraget var att i samarbete med Zäntrumprojektet och Röda Korsets secondhandbutik Ku-pan förädla de skänkta kläderna på ett miljövänligt sätt. Tanken är att Zäntrumprojektet ska sy om de skänkta kläderna till nya produkter som sedan ska säljas i secondhandbutiken Kupan.Syftet med den här uppsatsen är att finna ett sätt att förädla de skänkta kläderna och skapa nya produkter av dem. Vidare ska de skänkta kläderna skapa bättre resurser till Röda Korset som de kan tillgodogöra sig i sitt välgörenhetsarbete. Produkterna ska vara skapade på ett sådant sätt att de avger minsta möjliga avfallsmängd, främjar hållbar utveckling samt är attraktiva för Röda Korsets secondhandbutiks kunder.

This study was a final thesis, for the bachelor program in civil engineering at theUniversity of Uppsala, which was made on behalf of Riksbyggen in Uppsala. Acomparative study of two stain renovation methods; tradition pipe replacement andrelining was done with an environmental perspective. A simplified life cycleassessment (LCA) was done according to the International Organization ofStandardization (ISO) with the LCA tool Eco-indicator 99, in order to be estimate theimpact on the environment. LCA is a method that follows a product or a system?from the cradle to the grave?, which means that all the environmental impact over alifetime is considered.The work was executed by using a stairway with nine apartments in a house called?Uppsala Hus 9? as a reference object, which was provided by Riksbyggen.

Aquaponics is a food production system consisting of a consecutive cultivation of plants and aquatic animals, fish or shellfish, in recirculating water. The plants feed on the nutritious effluents from the fish tank and bacteria converts ammonia from the fish tank into nitrate that is absorbed by the plants. The plants receive nutrition and the fish gain purified water. The environmental impact of the production of fish meal and fish oil used in conventional fish feed includes a large consumption of fossil fuels with subsequent carbon dioxide emission. The aquaponic system can be made environmentally sustainable and self-supporting if supplemented with a vermicompost/vermiculture for the production of worm protein as a fish feed. Vegetable waste from the hydroponic part of the system can be reused as worm feed in the compost and the protein rich worms can be harvested, dried and grinded and brought back to the aquaculture as fish feed. As a first step in this direction, I have investigated the effect of recycling of vegetable waste in vermicomposts on the growth and number of earthworms (this was evaluated after harvesting). The hypotheses were that earthworms can be cultivated in the vegetable waste and that by adding manure to the vermicompost it is possible to obtain a nutrient content adequate to support a continuous worm harvest, in other words create a vermiculture. Eisenia fetida and Dendrobaena veneta were grown in 20 L bins containing peat mixed with either poultry or cattle manure. The proportions were 70% peat and 30 % manure. Discarded plant parts from lettuce cultivation was added to the vermicomposts (35 g per week) and water was supplied with 0.8 L per week.

This master thesis encompasses an inventory of the older industrial community of Gimo. Investigations of the contamination situation for each industrial area were done. A risk classification according to the Swedish Environmental Protection Agency?s ?Method of Surveying Contaminated Sites?, phase one, followed. The risk classification was done on areas of Iron Work, a rockwool industry and a landfill. Gimo have had iron manufacturing from 1615 until 1945. Gimo have had two blast-furnaces and two smithies periodically.

Emhart Glass is the world?s leading manufacturer of equipment, controls and components to the glass container industry. The goal of this project has been to identify improvements and propose cost saving solutions when moving one of Emhart Glass work cells in Sundsvall. The changes shall result in improved work environment and increased product quality. The method contains value stream mapping, concept selection and P-FMEA and complies with Emhart Glass goal to become a more Lean focused business.

This study examines the cultural place and status of video and computer games in the Swedish public library. Using works on popular culture and the theories of Pierre Bourdieu, this study employs quantitative methods, as well as textual analysis, to analyze the results of an online questionnaire with 19 questions focusing on selection criteria, shelf placement, perceived competence, as well as reasoning for having or not having these games in the library. 286 out of the 440 libraries contacted is participating in the study, and the libraries consist exclusively of public libraries in Sweden that are found in the database of the Royal Library.The results of this study show that a larger number of libraries than previously indicated have started to provide electronic games to their patrons. At the same time, patterns in the data and comments suggests that these games in many cases still do not enjoy the same level of cultural recognition as other media. Indicative of this is the way most libraries seem to focus on the medium being exclusively for their young patrons, with seem-ingly very little in the way of investment for adults.

The incineration of waste is steadily increasing in Sweden and so is the production of ashes. The bottom ash has for many years been used as construction material in landfills. Now many of the nation's landfills are closed and there is a great need to find another beneficial use for the ash. Bottom ash is a gravel-like material and with its material properties it can replace natural gravel in parts of roads and surface constructions. Today this use is only approved within landfill areas where leachate is collected and checked.

Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.

The purpose of this work is to find out if the suctionvalve to the salivaejector for dental equipment in a simple way can be improved or if a new design is needed. The result of the examination of the suctionvalve shows that the friction between the piston and the seal is high and that this causes the valve in a few cases sheaves. The study concluded that only small changes in material or detail, improve the component..

The idea behind this project came from a feed study executed two years during the lambing season. Both years wool loss was experienced. Low temperature in combination with shearing was believed to cause the wool loss the first year, while protein deficiency was believed to be the cause the second year. In the literature many causes of wool loss are described; mechanical wear, telogen effluvium, bacterial dermatitis, external parasites, wool break, scrapie, genetic causes and nutritional deficiencies are some examples. The aim of this thesis was to study causes for wool loss and how common wool loss is in Swedish sheep herds.