In this thesis, the Train Power System Simulator (TPSS) has been compared and verified with the commercial simulator TracFeed® Simulation (TracFeed). The basis for the comparison was a given part of the Swedish railway system, with steel transportation trains. Primarily, emphasis was placed on running time and energy consumption in simulation results. Two transformer systems were analyzed, booster and auto transformers. The high voltage transmission line, parallel to the railroad track, was disconnected in some simulations.

 The purpose with my study was primarily to illuminate the students' expectations on gained knowledge during their studies at the upper secondary school Hotel- and Restaurant program, and to what extent these expectations were fulfilled. Secondarily, the purpose was to compare the students' expected and perceived knowledge with the program goals set by the Swedish government and the knowledge requirements expressed in a pilot study made by the Education council of the Hotel and restaurant business (UHR, 2007).I chose a quantative approach and I used an anonymous group enquiry among students at the Hotel- and Restaurant program at two different upper secondary schools to carry out my study.Tendencies in the result suggested that the students at the Hotel- and Restaurant program expected high knowledge level within the competence areas of Guest reception and communication, Cleaning and hygiene, Cooking of cold and hot dishes and Waiting. The expectations were not big within the areas Computers and Internet and Business economics and management.Fulfillment of expected knowledge tended to be high within the areas where the expectations were big. It might therefore be a good investment for schools to work on the student expectations to increase motivation within the low expectation areas.A confrontation of the tendencies in the result with the program goals and the competence requirements expressed in the UHR study, suggested that the upper secondary Hotel- and Restaurant education might focus some more the areas of Guest reception and communication, Beverages and Organization of banquets. Business economics and management should be given much more weight..

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Virtualisering är en ökande trend där man istället för att ha en separat hårdvaruplattform förvarje system, så exekverar flera virtuella system på en och samma maskin. Dessa system kanha olika egenskaper och krav, exempelvis kan ett delsystem med hårda realtidskravinteragera med ett annat delsystem utan realtidskrav. Ett exempel på detta är ett industrielltstyrsystem där ena delsystemet samlar in tidskritisk systemdata i realtid medan det andradelsystemet utför icke tidskritiska åtgärder som är baserad på denna information, som tillexempel att grafiskt åskådliggöra systemstatus.Att dela upp system mellan olika virtuella delsystem ställer höga krav på delning av data. Ettsätt att dela data på ett säkert och strukturerat sätt är att använda sig av en realtidsdatabas.I detta exjobb har vi undersökt möjligheten att anpassa den kommersiella realtidsdatabasenMimer SQL Real-Time Edition för att användas i det virtualiserbara realtidssystemet INtime.Arbetet omfattar undersökningar av olika modeller för delat minne samt synkroniseringmellan systemen. Resultaten av dessa undersökningar har inkorporerats i en version avMimer SQL Real-Time Edition anpassad för virtualisering i INtime.

To render outdoor scenes with lots of vegetation in real time is a big challenge. This problem has important applications in the areas of visualization and simulation. Some progress has been made the last years, but a previously unsolved difficulty has been to combine high rendering quality with abundant variation in scenes. I present a method to mathematically generate and render vegetation in real time, with implementation in the scene graph Gizmo3D. The most important quality of the method is its ability to render scenes with many unique specimens with very low aliasing.

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

Voice onset time (VOT) är en akustisk tidsparameter som speglar den talmotoriska kontrollen. VOT anses vara det mest tillförlitliga akustiska tecknet på om en klusil är tonande eller tonlös.Syfte: att undersöka och jämföra VOT hos barn i åldrarna 3, 4 och 5 år samt jämföra med tidigare publicerade svenska vuxenvärden.Metod: 83 barn (51 flickor; 32 pojkar) ljudinspelades vid produktion av minimala par för de svenska klusilerna.Resultat: medelvärden för VOT minskade genomgående med åldern. Signifikanta skillnader erhölls mellan 3- och 5-åringarna för ljuden /t k b g/ samt gällande användandet av förton för tonande klusiler. Jämförelser med vuxenvärden visade att vuxna i högre utsträckning hade förton för de tonande ljuden och kortare VOT för de tonlösa ljuden än de, i föreliggande studie, deltagande barnen. Inga signifikanta könsskillnader påträffades.Resultaten av föreliggande studie kan användas som referensmaterial vid bedömning av barn med talmotoriska störningar..

Bakgrund: Få områden inom dagens medicin står inför så många och svåra etiska problem som transplantationskirurgin. De svårt sjuka människor som får möjligheten att genomgå en transplantation får chansen till ett nytt liv. Det är viktigt att sätta sig in i hur patienten upplever väntan för att som vårdpersonal kunna ge ett bra bemötande och en god omvårdnad. Syfte: Syftet med litteraturstudien var att ur ett patientperspektiv beskriva den känslomässiga upplevelsen av att vänta på en organtransplantation.Metod: Litteraturstudien bygger på åtta kvalitativa vetenskapliga artiklar. Resultat: Att vänta på en organtransplantation beskrevs som smärtsamt samtidigt som det gav patienterna tid att förbereda sig.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Antalet äldre människor ökar i samhället och står för en allt mer växande grupp patienter som behöver vård på akutmottagningen. Väntetiden på akutmottagningar runt om i landet blir allt längre. Det är ett välkänt faktum att äldre människor påverkas av att vänta länge på en akutmottagning, då deras allmäntillstånd lätt kan försämras på grund av det biologiska åldrandet och grundsjukdomar som gör dem skörare. Syftet med studien var att beskriva äldre patienters upplevelser av väntan vid besök på akutmottagningen. En litteraturstudie utfördes där resultatet baserades på tio vetenskapliga artiklar. Resultatet av denna litteraturöversikt delades in i fyra teman: att bli sedd, att bekräftas i sitt lidande, att vara delaktig som patient och att se patientens hela situation. Behovet hos den äldre att bli bekräftad, att få information och omvårdnad ökade när väntetiden blev lång på akutmottagningen.

It is becoming increasingly important for companies to meet customer demands due to intense competition in today's global market, that forcing companies to improve their offerings and become better at managing their supply chain (Shen et al., 2006).  Long lead times can be reduced by using different methods and strategies shows various researches. Lead times occur in the planning, production, inventories and handling of products (Treville et al., 2003).The aim of the study is to develop a method to analyze the factors that affect the length of internal delivery lead time in manufacturing companies. The method also included suggestions for reducing delivery lead-time to internal customers.The main factors that influenced the length of the on delivery lead times has summarized to make a selection among the factors that can have the most significant impact. The selected elements will be used as a method to analyze how these areas affect a company?s length on internal delivery lead times.The study shows that the causes of the long delivery lead times was the location of the customer order point, uncertain forecasts, long material and production planning time, and long waits in the production and storage.The delivery lead time, according to this report?s suggested improvements reduced by centralizing CODP and makes more reliable forecasts.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

The time we live in now is significant for its many ways of spreading information- it is indeed the era of communication. The Internet is the main reason for this evolution, where you can reach out to any corner in the world in less then a second. Information is flowing over us and we get more and more used to being in a constant accessible state. The individual might spread his own word as he wishes. From a democratic point of view this should give a great opening for everyone into the public spheer.