Användaracceptans är en viktig del i alla systemutvecklingsprojekt och är också en väldigt lättpåverkad variabel för en lyckad implementering. Därför är det viktigt att ha översikt på sådana faktorer som kan påverka användaracceptansen negativt, en sådan faktor är försening. Denna uppsats belyser sammanhanget mellan hur en försening påverkar användaracceptansen. Genom att låta en undersökningsgrupp genomgå en enkät utformad efter Technology Acceptance Model har jag samlat upp en generaliserad åsikt. Resultaten visar att försening som variabel inte påverkar användaracceptansen för fallstudien..

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Due to increasing international competition and new technology IT-consultants has been forced to oversee their business models lately. The main purpose of this study is to investigate the process and consequences of a shift in business model for a consultant by using a methodology based on action research. The empirical foundation consists of a field study with observations, notes, interviews and business related documents. The case describes a consultant?s process of shifting business model from profits based on man-hours to selling a standardized system.

The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

Organic Light Emitting Displays (OLEDs) are a new type of thin emissive displays predicted to possess superior properties to existing techniques e.g. Liquid Crystal Display (LCD). The main advantages are low power consumption and a thin display structure. This report contains an explanation of the emissive OLED technology, its functionality and the physics of the organic layer structure in an OLED. The technology is described with respect to the two classes of organic materials used in displays, small molecules and conjugated polymers.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

New technology makes it possible to remotely measure all consumers in a power network onan hourly basis and store the values in a database.This thesis work describes the conversion process between automatic meter reading systemMActor and calculation software Xpower.Then the possible differences between calculations of power networks using load curves incombination with a yearly estimate of consumption and calculations using hourly measuredvalues is examined.The result of the comparison shows that, for the power network under inspection, nosignificant difference could be noticed. This does not mean that calculations using hourlymeasured values would be unnecessary. I believe that in a near future calculations using hourmeasurements will be the primary choice for many power companies to whom technology isavailable.Also some basic calculations of fundamental power network parameters, such as power factorand loses, are presented using hourly measured distribution transformers in combinations withits hourly measured loads.The report is written in Swedish.

The Swedish government?s objective regarding information technology is to be world-leading in using the possibilities that digitization provides. In some aspects this has already been done, but in some areas much is yet to be accomplished. Although sports and recreational fitness activities are amongst the fastest growing areas of personal and consumer-oriented cloud computing-based technologies around the globe, there are areas within the genre that?s not evolving as quickly.

The report describes an ecodesign thesis performed by the author at the ÅF EcoDesign Center. The basic idea of ecodesign is to develop products with a minimized environmental load, without neglecting other significant product aspects such as function and price. During the last couple of years the public interest in environmental friendly products has increased, which has made it possible for companies to make a profit from their investments in ecodesign. To meet the increasing market for ecodesign services ÅF started the ÅF EcoDesign Center, where the company has gathered all of their competence in ecodesign in order to help companies to become greener. The task was to develop a tool for an Eco Screening.

AbstractThe purpose of project is to study the possibility for Borås Energy & Environment to build and run a commercial ethanol production facility in Borås. The project also studies the technology for the production of ethanol using renewable energy, e.g. lignocelluloses with focus on two processes, svag-syra hydrolyse and enzymatic hydrolyse. The technology of the process is based of hydrolysation of biomass (hemicelluloses and cellulose) to sugar and extract it to ethanol. These two techniques will compare with each other to determine which of them that it?s more suitable for ethanol production.

This is a technical report about cement stabilization in general and the stabilizationprocess during the construction of a warehouse in Halmstad, Sweden in particular and iswritten at the section for economy and technology at Halmstad University incollaboration with NCC Anläggning.NCC encountered variations in compression strength in the stabilized material on the firstwarehouse that they constructed for the company Biltema. In our report we used thestabilization process of the second warehouse for the same company as a reference todetermine what could be done to get a more homogeneous result for future projects.We also looked in to what testing method is the most suitable to determine the result ofthe stabilization.After interviews with people involved in the process and visits on the work site we havecome to the conclusion that the most probable cause to the variations in compressionstrength is segregation in the ballast material. This segregation can occur in severaldifferent occasions in the process such as during the production, transportation andhandling on the work site.Other causes for the variation can be improper compaction, overlapping stabilization insome places and different duration of hardening of the samples that are tested.The best way to do in situ test of the stabilized material is to do seismic investigations asthose are non-destructive tests in comparison to taking core samples and you can discoverany cracks or air bubbles in the material..

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Changes in the climate and the environment are largely consequences of human influences. Resources are given to teach adults about the environment. However, there are problems in focusing on adults because it is difficult to influence people when they already have created a lifestyle. We have instead chosen to focus on teaching children about changes in the climate and the consequences of this.Many of the toys available on the market today encourage children to consume. Luxury cars and dolls with hundreds of accessories are often made of materials that has have a negative effect on the environment.Another problem we often encountered during the year is the declining interest in technology and science.

As technology have continued to develop over the latest decades and become more advanced the pressure on the general citizens understanding of technology becomes a essential part to live in our society today. The transition have affected our society in great ways and have made a great impact on different groups, one of them being the elderly population in our society. The purpose of this study is to examine how the fast technological development in the latest decades have affected the elderly in our society. This from their perspective by gathering empirical data through semi-structured interviews with elderly people involved in the Agnes-project, a research project focused on improving the general quality of life for older people and increase their knowledge about technology. The study has shown that after the older peoples time involved in the Agnes-project their quality of life had improved in different areas. Areas such as increased cognitive activity, increased interest in new technology and an improvement in their communication with friends and family.

With the days DGPS-technology can a position of 5 centimetres decides. With this exactly position is the technology very interesting for the agriculture. I think this technology can come more and more in the future. You can also move the fact and information further to the spreader, sprayer and seeders. If the combine is equipped with harvest accounting, can you with help of the system make harvest maps.