Stress and burnout are two words that are commonly occurring in many contexts today. More and more people experience that they are stressed and that they does not feel well. The long term sick -leave increases as a consequence of people being burned out. These phenomena prolong over all ages, sexes, classes and professional categories, which probably means that the construction industry would not be spared.  In the construction industry, stress and bad health are no new phenomenon, already during the 1970s and big parts of the 1990 s, the construction sector were exposed to the phenomena.A sector that has a large turnover annually cannot presumably be faultless.

It has become increasingly common for a city or region to use sporting and media events to promote themselves. But what is behind these events? What kind of organisation is necessary to plan and run them? In the summer of 2009 the internationally known Volvo Ocean Race will arrive in Stockholm. The race is eight months long and will be hosted in Stockholm for almost the whole of June. The City of Stockholm is behind the event and Stockholm?s marinas will be responsible for making sure that everything runs smoothly and on schedule.

Abstract In high voltage substations there is an increasing demand for computerized equipment, and automation of operation and supervision. The future primary equipment will provide the possibility to collect more information and to provide better control for improved effectiveness. Since ABB has got a large customer target, each product must be custom made to fulfil the customers (often from different countries) demands. Later these products will be configured by engineers who may not be familiar with the tools used at ABB. This is a very expensive and time consuming.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

During the last decade executive coaching has become an increasingly popular method of management development. Few studies have been conducted within this area, especially in Sweden, and little has been said about the construction of management in executive coaching. The purpose of this master?s thesis is to study executive coaching from a social constructionist perspective, focusing on the construction of management. The two research questions are: How is management constructed in executive coaching? How can we understand the construction of management in executive coaching? Additionally, we identify gender as a social construction of importance and thus include a gender perspective in our analysis.

This essay examines the visual art of Helena Blomqvist with theory of performativity from Judith Butler among others, with a focus on the potential of visual art to question and dislocate norms. It consists of an analysis of three works of art from three aspects: the work of art, the viewer and the situation, and eventuates in an analysis of how the works relate to representation and norms. The construction of the works is related to Butler's theory of identity construction..

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

Ekonomistyrning innefattar arbete inriktat mot att uppnå företagets övergripande ekonomiska mål. En annan viktig del av företagets verksamhet är produktionsstyrning, som syftar till att styra och optimera företagets produktionsprocesser. För att ha ett väl fungerande styrsystem är det viktigt att ekonomistyrning och produktionsstyrning är integrerade, och strävar mot samma mål. Ett mätetal som påverkar både styrningen av ekonomi och produktion är produktkostnaden.Syftet med arbetet har varit att kartlägga hur produktkostnaden beräknas på Volvo Aero Corporation, kombinerat med hur den används och påverkar styrningen av företaget. Utifrån identifierade problem, och befintlig vetenskaplig teori, har förslag på förändringar av produktkostnadsdefinitionen tagits fram i syfte att få en mer rättvisande produktkostnad..

This thesis aspires to construct a routing optimization method customized for Volvo Powerstrain?s manufacturing plant in Skövde, Sweden. In order to enforce Volvo?s own understanding and control of there own organization, as well as optimize the utilization of the in-house tow trains, the BRO methodology where created. The methodology where created from observations of the currents working environment, analysis of order data as well as a comparison with two similar producing factories.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

This reports goal is the give BSR AB more information that's useful towards their customers in marketing of their products.It involves tests of different air filters designed for cars and 3D-modelling of Opti-Flow systems. The three models thats being tested is SAAB (93SS), VAG (1.8T) and Volvo (S60). To every brand there are three different models. A orginal- , sport- and an open cone air filter (Opti-Flow).The results indicate that the open Opti-Flow filter has better performance compared to the other cased filters. The sport filters for SAAB and Volvo has better performance then the original filter.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

The aim of this study was to gain a comprehension of managers experience of their identity and their construction of identity in the work sphere. 14 semi-structured interviews were performed with managers in the public sector. The interviews were analyzed from a hermeneutic approach. The results showed that the managers´ experience of their identity and their construction of identity were full of nuances and was characterized by a being and a becoming. The managers had several social identities at their disposal, which were brought to the fore due to the situation.

This thesis is written at WSP management and investigates the practice of pre-project planning and feasibility studies at Swedish construction companies, through the study of the ongoing feasibility study of the mall Sturegallerian in Stockholm, and through interviews with experienced project managers in the construction industry. There is currently a big span in the way Swedish construction companies plan the pre-project phase and the aim of this thesis is to present a more generic and standardized way that helps minimize project risks and maximize efficiency and profit. The result is a generic model which can be used in pre-project planning. The model describes the phases in the preproject planning process and the activities that span these phases. Is also describes the categories of professions that need to participate in the preproject planning group and which activities that each profession executes. The other result is a list of factors that need to be considered for a well performed pre-project phase, as found during the interviews. Among others the thesis stresses the importance of involving the client as a key participant in the process.