The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

Syfte med denna rapport är att kartlägga befintlig kostnadsreduceringsaktiviteter avseende monteringseffektivitet av produkter inom Volvo PV. Samt att genomföra en informationssökning för identifiering av metoder i andra branscher. Rapporten är upplagd på så sätt att först beskrivs kort företaget och syftet med arbetet. Därefter beskrivs de begränsningar och de metoder som valts att användas vid informationsinhämtningen. Efter detta kommer en teoridel där det utförligt beskrivs ett antal kostnadsreducerings metoder/aktiviteter, hur de genomförs och deras fördelar, nackdelar, kostnader och förväntat resultat.

This diploma work was conducted in collaboration with the Swedish civil engineeringconstruction company Skanska Construction in Stockholm. Their interest is todevelop a number of type approved form constructions which can be used during theconstruction of concrete walls. Skanska focuses on improving safety on their projectsand both supervisors and workers have a need for approved form constructions inthe current situation.The study is focused on safety and the purpose is to facilitate the preparation beforethe form work can begin. By studying the literature of the subject and conductinterviews with employees at Skanska Construction, the understanding of the issueand knowledge will be increased.Literature studies, interviews together with production and design have been thebasis for a successful study. The work has resulted in three types of approved formconstructions to Skanska Construction and the drawings can be used of employees atthe company.

This Diploma work investigates internal air ventilated crawl-space in respect to construction and damp. The Diploma work assumes from a general description of crawl-space and general dump problems in ground construction. An internal air ventilated crawl-space is a construction where you take the ventilation air from the building and bring it down to the crawl-space and lets the air circulate before it passes through a retaining aggregate on the way out from the crawl-space. In this matter you get a worm space under the building and a lot less dump problems in form of · Ground damp · Build damp The ground dump reduces through draining around the building, different layer of gravel between the ground and the building and ventilation of the crawl- space. The build dump reduces through ventilation of the crawl-space as fast as possible.

Studien syftar till att förbättra kunskapen om förhållandet mellan idéhantering och idégenereringsvilja hos Volvo CE och presenterar rekommendationer för fortsatt förbättringsarbete. Detta behov har uppkommit då Volvo CE uppfattat att antalet genererade idéer sjunkit. Följande frågor formulerades i arbetets inledningsfas: Hur påverkas deltagarnas vilja att komma med idéer och förbättringsförslag av idéhanteringssystemet? Finns det brister i Volvos idéhanteringssystem och om så är fallet, hur avhjälps detta? Arbetets empiri samlades genom ett antal intervjuer av deltagare och processledare under hösten 2011 och metoden har varit kvalitativ med grundad teori som ansats. Resultatet av arbetet är ett antal faktorer som tillsammans kraftigt påverkar deltagarnas idégenereringsvilja på lång sikt.

A new site- and construction-law came into effect in May 2011. The new law, PBL2010:900 implies several different changes of the law. These changes concern bothconstructors, people working in municipality and county councils and other peoplethat in some way are related to the building sector. Except from the change in orderof the chapters and the renewed and modernized language, the law has now beenextended with a few new phases.According to the new law a certificate has to be issued to start and finish theconstruction; the construction consulting has changed name into technical consultingand the protocol for the controls has to show what the control is being compared to.This diploma work concerns control visits on construction sites as related to the newlaw. The reason why visits on construction sites are now implemented in the law isbecause the government saw a lack of trustworthiness in the old law.

Title: What drives the customer's choice of packaging and which factors influence the customer's packaging cost? ? in the automotive and manufacturing industriesAuthor: Lena AnderssonSupervisors: Annika Olsson, Division of Packaging Logistics, Lund Institute of TechnologyHelena Claesson, Volvo Logistics ABProblem: Which parameters are important for logistic people to think of when they are going to choose a package?Which cost factors are included in the packaging cost?What kind of added value can an emballage supplier provide their services with?Purpose: The purpose of the project was to study the parameters that drives the customer's choice of packaging and the factors that influence the total packaging cost. The study also consists of a valuation of what an emballage supplier can offer to add value to their services.Method: The study is based on interviews with people who are working at Volvo Logistics and Volvo Car Corporation. Volvo Logistics provide their customers with standard packaging material, which they own and administrate. Volvo Car Corporation is one of their customers.

The purpose with this examination is to build a measureequipment to AerotechTelub AB (AT), who will registrate fault in SRAM-memory in contact with cosmic radiation. The equipment will be created around developcard from Memec Design with FPGA from Xilinx. The logic in the FPGA will be implemented with the hardwaredescribed language VHDL. The SRAM-memory that will be tested is build in CMOS-teknologi. The memorycells will be loaded with a predecided bitpattern.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

This masters thesis concerns a modeling project performed at Volvo Technology in Gothenburg, Sweden. The main purpose of the project has been to develop a physical model of the climate in construction vehicles that later on can be used in the development of an electronic climate controller. The focus of the work has been on one type of wheel loader and one type of excavator. The temperature inside the compartment has been set equal to the notion climate. With physical theories about air flow and heat transfer in respect, relations between the components in the climate unit and the compartment has been calculated.

Vi har inte funnit några konkreta sammband mellan hanteringen kvalitetsbristkostnader och Volvo Pentas användande av ABC-kalkylering. Vidare har vi kunnat konstatera att medvetenheten om att det finns kvalitetsbristkostnaderna inom företaget är relativt stor. Dock finns väldigt få system eller verktyg för kontroll och uppföljning av kostnader som orsakas av kvalitetsbrister. Vårt förslag till Volvo Penta är att, under den lönsamma period som företaget nu befinner sig i, upprätta ett system som fångar upp företagets kvalitetsbristkostnader. Vi tror att detta kan generera stora kostnadsbesparingar i framtiden..

Begreppet kommunikativa upplevelser kommer i denna uppsats att användas i sammanhanget om hur Volvo använder sig av dem i sin varumärkeskommunikation samt vad som kommuniceras. Det kommer även att appliceras på kundperspektivet då det beskriver hur individer uppfattar företags utsända kommunikation.Uppsatsens syfte är att analysera innehållet, budskapet och utformningen av Volvos marknadskommunikation i Nordamerika för att diskutera hur begreppet kommunikativa sinnesupplevelser framställer vad varumärket står för. Samtidigt ska jag undersöka hur individer som exponerats av Volvos markandskommunikation uppfattar den och hur de ser på Volvo som varumärke.I mitt forskningsarbete har jag använt mig av tre kvalitativa metoder för att samla in data: Intervju med John Maloney Vice president för Volvos marknadskommunikation Nordamerika, deltagande observation hos en Volvoåterförsäljare i Minneapolis, fokusgrupp diskuterande reklamfilmer från Volvo.Då det inte finns någon teori genererad för mitt nyfunna begrepp har jag valt att bygga en teoretisk ram på närliggande begrepp. I basen har jag valt att visa teorier gällande marknadskommunikation och traditionell marknadsföring. Jag har sedan valt att utveckla med flera nytänkande perspektiv i marknadsföringen där påverkan genom upplevelser, sinnen och servicelandskapet diskuteras Mitt syfte med uppsatsen är att analysera kommunikativa sinnesupplevelsers roll i Volvos varumärkesbyggande därför anser jag det relevant att diskutera teorier gällande varumärken och hur våra sinnen kan påverka upplevelsen av varumärken.Volvo kodar meddelande i symboler som sedan sänds i exempelvis TV-reklam, kunden avkodar dem och upplever kommunikativa sinnesupplevelser som skapar känslor vilka ger en uppfattning av varumärket och organisationen.

This thesis work was made to optimize the writing of the construction specificationsat FKA. These construction specifications are created before each plant modificationsthat is started because requirements from the Swedish radiation safety authority(SSM) and internally on Forsmarks nuclear group as constructions / implementationdocumentationThe study was done through seven interviews of two people at three different groupsinvolved in the construction specification and an interview from the group accreditedverification. The four selected groups were selected through an extensive analyticalwork resulted in an elimination matrix where these four groups was considered to bemost involved with the construction specification.The questions asked to these individuals were based on the instructions and sampletext that are described in the construction specification. To ensure the quality of thethesis were to limit itself to the chapters that were considered most relevant toimprove. The analysis revealed a number of points that should be improved, partlyinto the routines when writing the construction specification and when ether sampletext or suggestions should be changed and complemented.

The purpose of this study was to examine how pre-school teachers in Montessori inspired and traditional preschools can work with build and construction with the older children, and what views the pre-school teachers might have on the subject.  The study was implemented through qualitative semi-structured interviews with pre-school teachers. The investigational method was chosen due to the fact that I wanted to gain knowledge about the pre-school teachers? views and perspectives on build and construction activities, and how they might work with it. Another reason was to examine how the view on, and the work with build and construction can resemble and differ between Montessori inspired pre-schools and traditional pre-schools.The result shows that there is both similarities and diverseness between the Montessori influenced pre-schools and the traditional pre-schools, when it comes to how the pre-school teachers reason and work with build and construction.

AbstractToday, too many construction projects are delayed and deviates from the budget. Agood project management is the basis for successful construction project. The mostcommon planning methods in the construction industry is currently Gantt chart andCPM. The problem with these is that focus is only at the time of the project anddoesn?t handle the budget.