Sectra Mameas is a medical technology company in an expansive phase that is planning to increase its volume capacity with 50 % in the beginning of 2009. This to be able to deliver the increased number of systems that the customers request. To be able to produce more units the takt time of the assembly line needs to be shortened. This could only be done by identifying and solving recurring problems. To be able to find the problems, create a common knowledge of which these are and eliminate them the production department of Sectra Mamea needs to visualize certainKey Performance Indicators (KPI) in the organization.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

The Irish immigrants have been an important part of London throughout the centuries. Their presence can be found from the 17th century and onwards. Initially occupied as seasonal workers in agrarian fields the Irish later found alternative ways of supporting themselves as the Industrial Revolution transformed the whole of England. Despite their vital importance to the construction of what was to be known as "the modern Babylon" the Irish have been victims of both social prejudice and maltreatment. Some historians have imposed a comparison between the Irish in England and the African slaves in the United States.

Distrilux International AB, a company within the Electrolux-group, works among other things with storing of products from other companies in the Electrolux-group. This rapport contains a cost analysis of the two Distrilux warehouses in Motala and Mariestad. The company offers five services in these warehouses, in-loading of products from a local factory and from external factories, storing, out-loading of products to Sweden (domestic) and for export. Since there has been some hesitation of the accuracy of the price-model of today, a master's thesis has been advertised. The purpose of the thesis has been to investigate the agreement of the price-model of today and the apportionment of the costing in warehouses.The main problem is to determine which activities is to be considered important in the price-model.

Haemonchus contortus is the most important bloodsucking gastrointestinal nematode in small ruminants worldwide. It is often controlled by anthelmintics. Even though other methods to control are available, the most efficient way to treat an animal with clinically manifested haemonchosis is to use one of the available broad spectrum anthelmintics: benzimidazoles (BZ), macrocyclic lactones (ML) or imidothiazoles-tetrahydropyromidines or the narrow spectrum drugs salisylanilides or nitrophenols. Anthelmintic resistance (AR) against all groups of anthelmintics in nematode parasites has been reported from many countries, and even multiple AR has been observed. In this study I have investigated the resistance levels to all major classes of broad spectrum anthelmintics in a naturally infected flock of sheep of Red Maasai sheep (RM), Dorper sheep (D) and their offsprings on a research farm in Kenya.

This thesis presents the residential development in the city of Uppsala, targeting theliving conditions of young adults and students. In cooperation with Sweco Architect inUppsala. The purpose of this survey is to reveal difficulties and possibilities for theearly development of the construction process for studio apartments. Theinformation has been obtained through both a literature review and interviews. Theliterature review is based on Swedish regulations and previous studies in the field, andthe interviews were conducted with organisations and people in leading positionswithin Uppsala.

The aim with this thesis was to investigate what characterises an English Arts and Crafts garden how they could be modernised in Sweden. My research was limited to 20 weeks of full-time writing and worth 30 ECTS. Through literature studies, interviews and site visits I could analyse my findings which resulted in a concrete garden design project. The Arts and Crafts was a movement that started in England during the 1880?s and evolved as a reaction towards the industrialisation. The influence came from the writings and practices of John Ruskin (1819-1900) and William Morris (1834-1896) who advocated the importance of craftsmanship. The Arts and Crafts movement also became a ?recipe for life? and was associated with a healthy and morally pure way of living.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

Works on transparent paper, also commonly known as tracing paper, have been described as ephemeral or temporary working documents and they usually number large quantities in archival and museum collections. They have therefore previously been considered of lower priority and can be found in poor condition due to a lack of treatment or suitable storage prospects. In addition, transparent paper can be very sensitive to moisture and reacts by deformation or loss of transparency. Due to the volume of these works and the necessity of treatment, there is a call for simple and efficient conservation methods. A common solution in archives for the treatment of water-sensitive works on paper has been the use of heat-activated tissues as they can be applied without the introduction of solvents. There is little published about the use of heat-activated tissues on transparent paper and is mentioned only briefly in existing literature.

The project was initiated by Medipharm which produce microbial inoculants which used as additives to preserve forage. The main goal was to test three inoculants to produce maize silege. The following Medipharm produced inoculants were tested, Milab 393, Lactisil Wolecrop II, Lactisil 300 2. An untreated control was included in the study. The trial was done at Swedish university of Agriculture and Science in Alnarp, Sweden. Eurostar was the cultivar of the maize and was grown on 20, 5 hectares.

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

En expandering av storstäder har bidragit till att nya behov måste uppfyllas. Däribland behovet av nya förskolor. Idag och i framtiden kommer det ställas höga krav på att nya byggnader ska bli mer energieffektiva och det är viktigt att kommuner ligger i framkant i denna utveckling då de ska vara ett föredöme i samhället. Valet föll därför på att kombinera dessa behov och krav genom att gestalta en energieffektiv förskola i Haninge kommun som är i ett expansivt skede. Genom inventering av befintlig information kring ämnena förskola och energieffektivt byggande, samt studiebesök och fallstudier valdes att förskolan skulle gestaltas enligt passivhusteknik. Informationen behandlar bland annat krav från BBR, FEBY och Lpfö98. Det var genom dessa metoder som ett lokalprogram innehållandes en sambandsanalys kunde tas fram för kommandeförskola.

At the end of 2008, Arla concluded agreements with several supermarkets in southern Sweden. The agreement with the supermarkets excluded Ska?nemejerier from the stores. This meant that Ska?nemejerier lost approximately 7% of sales volume.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.