Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

A growing number of cities and municipalities in Sweden begin to work with city models in 3D. For the most part the models are used for visualizations of ongoing planning processes, but also for the analysis of noise, shadow studies and environmental disaster simulations.Gothenburg continues to develop the use of 3D maps in municipal operations and is demanding a way to create building elements (walls), which generates in 3D buildings, from roof constructions that are mapped from the primary map. A method has been investigated in the present study. The results are then presented as a 3D model of buildings, along with a terrain map that will facilitate the localization of the area. The created 3D buildings are then compared with roof-data from the primary map to see how well they harmonize with each other.

Based on 30 years of work experience in TV and film production, I have made a phenomenological analysis of my perception of meaning in work - how it arises and how it is undermined. The story starts in my experience of early professional film making in the 1980's and describes how a change to work in TV production required the development of a new professional identity. The text also illustrates how as a female director I have managed my role in a male dominated and structured work environment. Being defined as an exception from the male norm has pushed me towards femininist reflection and the need to redefine my own work role - the generally accepted view having felt uncomfortable. An analysis of structural change in TV and film production shows how market pressures and ways of thought have increasingly invaded cultural endeavour. Professional spheres of influence are weakened, while developments in the media are characterised by a commercialism which encroaches more and more upon artistic, spiritual and moral values. This attitude, where quality is in retreat, has transformedprogramme makers from creative originators into becoming suppliers of raw material in a factory- like process geared to produce great volume at low cost.The aim of this essay is to show how changes in society and in TV and film making have affected my perception of my work.

This study was made on former agricultural areas that had been planted with spruce or pine, in the county of Västerbotten. The goal of the project was to investigate suspected deficiency of boron in these areas. Several objects have been reported for possible deficiency and some of these have the characteristic symptoms of boron-deficiency. The hypotheses are that 1) Boron deficiency is present at several of the investigated objects. 2) Planting of forest on cultivated postglacial sediments leads to a successive podzolisation with a decreasing content of organic matter in the mineral soil, due to decomposition, and a decreasing pH in the soil, even on locations that have been added lime. To be able to confirm or reject the hypotheses a number of tests were performed.

HemoCue AB is a multinational corporation targeted on manufacturing point-of-care analysisinstruments for medical treatment. Their main product, the DM 201, is outdated and has bigissues gaining new market shares. For example, no medical treatment center in Sweden usesDM 201 frequently. The project of developing a new instrument to replace it was assignedtwo students at the development engineering program at Halmstad University. The projectalso included integration of the new platform for DM 202 to HemoCue AB:s remainingproducts.The project began by defining the different technical areas concerned.

Stump harvest could be found in the late 1970?s and the early 1980?s. And now when the prices on energy are high it has become an interesting topic again. This work has been conducted within Holmen Skog?s stump harvest testing in Norrköping.

Seen in many trends and studies, consumers of today feel a growing desire to experience the uniqueness in products and services. This is forcing companies be more innovative and creative in their marketing, in order to distinguish and differentiate themselves and their products/services. We believe that creating a top-to-bottom experience strategy is one way that a company can succeed in this.The purpose of this thesis is to analyze and clarify how a business can reinforce their product experience through a complete experience strategy. In order to demonstrate this we have made a case-study research for the New Wave Group, advising them on how they can place blown glass art at the heart of the town of Kosta.The authors have used qualitative methods and an abductive approach. Four interviews have been completed with executives from the New Wave Group, including the project manager, hotel manager, head of the Kosta Boda smeltery and head of guides and visitors at Kosta museum.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

This thesis analyzes the effects of different fertilization strategies on forest management at Holmen Skog in Umeå district. Harvesting volumes, net present values and fertilization intensity are presented for each fertilization scenario. The planning reserve (percentage area older than minimum final felling age) was also analyzed in this study.The thesis covers the analysis of five different fertilization scenarios, varying in fertilization intensity, from no fertilization at all, to fertilization at every harvesting operation (thinning or final felling). A sub-study was also carried out so the reader in detail can see how the different fertilization scenarios affect individual forest stands of different nature. The analysis has been done with the planning tool PlanWise, which is an application of the Heureka analysis and planning system.

Total protection is often the option chosen when protecting forests with high environmental values. An alternative to total protection is application of management regimes that do not interrupt continuity of tree cover. This study focuses mainly on continuous cover forestry (CCF) in forest stands already protected. All objects are situated in the county of Jämtland in northwest Sweden. The purpose of the study was to attain a greater knowledge about CCF practices.

The Swedish government has proposed that 20 % of the cultivated land in Sweden should be organic by the year 2010 (The Swedish Board of Agriculture, 2008). In addition to this the production of organic food like milk, meat and egg should increase considerably. To reach the government?s goal it is necessary that the Swedish farmers get motivated to convert their production from conventional to organic. Milko is a dairy association that has chosen to focus on organic products, they want to be the leading organic dairy association, and therefore they have a large need for organic milk (Milko, 2008).

The requirements for operative planning activities are increasing. The forest industry wants to gain better control over wood flow. A felling that is more market adjusted is desirable. However, this causes problems in the operative planning process because of the data collection methods used today. Data about timber assortments and data about the distribution of the tree diameter, etc., are often lacking. Airborne laser scanning is used to a greater extent than before for estimation of forest variables and should perhaps be used to the same extent in operative planning activities as well.

The popularity of vegetated, or green roofs, has grown over the past years due to their potential function of maintaining urban environment quality. The aim of this study was to investigate if substrates with different organic material, peat and charcoal, with two contents (3 or 6 weight%) influenced the growth of the cuttings during the first critical period of the establishment. Biochar is used as amendment to agricultural soils and has, theoretically, many of the properties suitable as organic content in green roof-substrates. Peat is one of the materials that is commercially used in green roof industry. The substrate has been treated with different amounts of water.

This thesis analyzes the effects of different fertilization strategies on forest management at Holmen Skog in Umeå district. Harvesting volumes, net present values and fertilization intensity are presented for each fertilization scenario. The planning reserve (percentage area older than minimum final felling age) was also analyzed in this study.The thesis covers the analysis of five different fertilization scenarios, varying in fertilization intensity, from no fertilization at all, to fertilization at every harvesting operation (thinning or final felling). A sub-study was also carried out so the reader in detail can see how the different fertilization scenarios affect individual forest stands of different nature. The analysis has been done with the planning tool PlanWise, which is an application of the Heureka analysis and planning system.

In a sequence described in the next paragraphs, I remove the poorly insulated roof of Gustavsberg Porcelain Factory and make new use of its  foundation. The monolith cement slab, once supporting heavy industrial machinery, is now the site of lakes and other movements:The top floor area is split, and a new built volume, one story higher, overtakes the southern half resting on the factory?s basement, digging into it at its western and eastern ends. Striking horizontally, the fissure exposes a long central axis, taking advantage of the factory?s horizontality to articulate vastness .