95% of the productive forest land in Sweden are now being exploited for forestry. The new Forestry Act of 1993 equate the goal of production and the environmental goal which means that the objective for forestry is a sustainable yield, while the biological diversity must be preserved. Recent years results from the inventories of the Board of Forestry show declining trends in how nature conservation aspects taken into consideration at the felling sites.The aim of this study is to investigate what happends with the nature consideration taken at felling sites in the long run. 20 final fellings in the county of Östergötland were re-inventoried 7-9 years after final felling. These felling sites had previously been inventoried before final felling (P0) and one year after final felling (P1) in the inventory Polytax by the Board of Forestry.

This report deals with the performance of a batch flow treatment of landfillleachate compared with a continuous flow system. The parameters in focus were total Kjeldahl nitrogen (TKN), BOD5 and COD. The pilot-scale experiment used eight barrels with a volume of 150 liters. Each barrel was constructed differently concerning its flow, its bed material grain size and its presence of plants or not. Four of the barrels worked in batch mode, thus four in continuous flow mode.

An old and well known problem in sawmilling is to determine which dimensions /products those are most profitable to produce. Existing optimization models maximize the value of the log. In other words, based upon the market prices of the dimensions the models calculate the best way to split the log. Yet there is a great uncertainty if the most well paid dimensions really are the most profitable to produce. The costs of the process from lumber to sawn products are hard to determine and are therefore often left out from the optimization process. In this study the economic contribution of different dimensions/products are analysed.

Society has depended on fossil-based fuel for a long time, which has led to a fundamental increase of greenhouse gases in the Earth?s atmosphere. To tackle this problem the international community has agreed that action is necessary. Focus is now directed towards local extraction of energy from renewable sources such as biogas.Utö is participating in the Green Island project, which aims to investigate the possibility of making the island climate neutral. This report has been implemented on behalf of Skärgårdsstiftelsen, the main partner responsible for the Green Island project in Sweden.

People of the modern world consume more than they ever used to do. Because of the close correlation between consumption and the amount of waste, the waste volume is also expected to increase. The purpose of this study is to examine if some measures in the recycling process from Sweden could be implemented in Indonesia. In fact, Indonesia is one of the countries in which the waste management system is struggling. Tetra Pak, one of the world leading producer of food packaging, is studied in this report.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

Forest fertilization had its peak in the late 60´s, when almost 200 000 ha was fertilized annually. The silviculture of today has high demands for timber production at the same time as the demand for nature conservation increases. It means that it?s necessary to produce more volume in smaller areas in the future. The use of DGPS equipment has in modern forestry in Sweden become more and more common.

Zetterberg's Industri AB believe that capital and lead time will be reduced by implementing Kanban. Therefore, it was an investigation to prove that Kanban is an effective method. In this work a research had to be done to show how the material supply system looks like today and to explore the subframe components to see which components that are interesting from Kanban viewpoint. Previous orders of subframes were investigated. Therefore, it was a list of the various components of the previous orders for the subframe.

Erythropoiesis is a complex and carefully controlled process which is mainly regulated by erythropoietin. Using flow cytometry cells in a blood sample can be analyzed one by one. ADVIA 2120 using flow cytometry for analysis of red blood cells (RBC) and reticulocytes. Red blood cell distribution width (RDW) is a component of the RBC method. RDW indicates size variation on erythrocytes and is measured as a percentage of the mean cell volume (MCV). By measuring the RDW anemia can be divided into makrocytic, microcytic or normocytic. Reticulocytes refract light more strongly than red blood cells because they contain some cellular debris. The number of reticulocytes in the peripheral blood reflects erythropoiesis in the bone marrow. The purpose of this project was that by approved methods to establish reference ranges for the parameters, RDW and reticulocyte counts.The individuals who participated in the study, n=124, were considered healthy and had varying ethnicity. Reference subjects had not donated blood the last six months and participation in the study was voluntary.The statistic evaluation includes examination of distribution, and reference ranges for both men and women were established using the 2.5:t and 97.5:t percentiles. The calculated reference interval for RDW was between 12.0 ? 14.3% and the calculated reference interval for reticulocytes was between 38.0 ? 112.8 x109 cells/L. The results showed a significant difference between males and females for the parameter reticulocytes was seen. The difference indicates that different reference ranges should be established for men and women (p<0,0001). No significant difference between males and females were seen for RDW (p=0,74) indicating that the same reference ranges can be used for both men and women. .

The purpose of this report is to come up with possible improvement suggestions to the distribution central at Götene Stål & Verktygs AB (GSV). GSV is a wholesale dealer located in Götene. The company doesn?t produce anything it self, it buys in products and sells them to customers.The distribution central at GSV is the place where the products comes in and gets ready to deliver.To come up with possible improvement suggestions we started with process mapping over the main process and the distribution centre process. The main process here is from the point where the customer gives GSV an order to the point where GSV deliver the order.Our result shows that the major problem in the distribution central at GSV is the big volume differences in the incoming goods.

Lake lowering in sulphide-rich areas is currently a major environmental impact for surface water. This study focuses on whether there is a relationship between a gradient of lake lowering and surface water impacts in areas of sulphide-rich sediments, in order to better understand their contribution of heavy metals and sulfuric acid. Also, is it a reasonable method to use the reduced lake area in order to quantify the gradient? The survey was conducted by collecting water samples from reference lakes and lowered lakes from south to north in coastal areas within the county of Västerbotten. Water samples were then analyzed for TOC, pH, conductivity, anions, base cations, alkalinity, acidity, sulfate, Al, Cd, Fe, Mn, Cu, Zn and Pb.

Norconsult AB has developed a solarhousing concept, a house designed for the warm climate in the Middle East andwith large quantities of solar panels installed. The cooling system for the house was designed in an earlier report, the purpose of this thesis is to investigate the possibility of short and long term storage of thermal energy via an underground energy storage volume.Two different designs of the storage and three different filling materials have been integrated into a model to simulate different cases. The first design consisted of pipes installed in the ground, without insulation. The second design consisted of an insulated concrete box installed to prevent thermal energy from the surrounding soil to flow towards the lower temperature regions within the storage. The three different filling materials were dry saudi sand, water saturated saudi sand and the filling material used by the client for energy storage in Sweden.The results from the simulations show that neither of the designs, regardless of the filling material, managed to extract enough thermal energy from the house to the ground to uphold the demands of indoor climate.

Hematology-instruments that analyze blood cells can at specific cases be followed by manual counting with a hemocytometer. The plastic hemocytometer which has a fixed coverslip and is assigned for disposable use, appears to reduce the problems arising from the use of the traditional glass hemocytometer, for instance coverslip-application difficulty and dust particles. Capillary whole blood sampling may be useful for patients at the emergency department and in addition, a smaller volume of blood is taken compared to venous blood sampling. This study will focus on the platelet- and leukocyte count (PLT and WBC) in venous and capillary blood, in order to compare the plastic- and glass hemocytometers with Sysmex XN-2000 (Sysmex Corporation, Kobe, Japan), and verify if capillary whole blood sampling can be used for the measurement of these hematological parameters. 30 subjects donated both capillary- and venous blood samples and these blood samples were analyzed with glass- and plastic hemocytometers with Sysmex XN-2000 as the reference method.

With the increased volume of commercial content online, some news sites have adopted so-called native advertising on their websites to convey marketing messages more discreetly. As an increased share of advertising budgets is spent on this form of advertising this essay aims to examine its news consumer?s attitudes towards the phenomenon. The research was carried out through a qualitative study where news consumers discussed their attitudes in two separate focus groups. This was analyzed with the help of the previous studies Advertisement - an uninvited guest? and Banner Blindness as well as theories including theory of science hermeneutics, reception analysis, convergence culture, brand schema, advertising schema and ad- brand attitude.The results show that in most cases native advertising is met with indifferent attitudes but in some cases also confusion, which could lead to negative attitudes towards the ad and the news site.

AbstractPurpose/Aim: To investigate how the positions between the paper, the public and the elite in society have changed on Aftonbladets Op-Eds and Letter to the editor-pages between 1999 to 2005. In a wider context this means Aftonbladets potential to contribute to the role of the press as a forum of public debate.Material/Method: The study focuses on one week during 1999, 2002 and 2005. Here a quantitative contents analyse with inspiration from conversation (dialogue) analyse has been used.Main results: The study shows that the paper has strengthened its position over this period of time. Mainly by taking a more active role in forming and encouraging the debate. The public was given more space in 2002, then in 1999 and 2005.