Chemical substances are spread diffusely and uncontrollably as a result of the increased consumption of goods. REVAQ is a certification system that works to reduce the flow of hazardous substances to Swedish treatment plants and to create a sustainable nutrient recycling. According to REVAQ, the yearly accumulating rate of metals should not exceed 0.2% in soil per year. Silver and bismuth are two metals that do not fulfill this requirement. The silver concentration in sludge decreased during the last decade, however the last few years, it has leveled off.

Background and problem: Since the new law took place in 1999, it has been illegal towash a car with substances that can damage the environment on a paved street or on a driveway through a garage. This has conveyed to a new industry where more and more self-service car wash facility have opened around the country. Vetlanda Vägkrog AB has since 2012 been planning to install manual self-service car wash facility at the back of their restaurant business. The authors mission was to make an analysis in order to examine whether an investment of carwashes are lucrative enough for Vetlanda Vägkrog AB.Aim: The study's main objective was to analyze the profitability of an investment in a self-service car wash facility at Vetlanda Vägkrog AB, based on given data. The authors sub-aim was to clarify which factors in general that had played the greatest part in the establishment of a self-service car wash facility.Method: The authors have used an abductive approach in order to fulfill the aim of the study.

Denna reflexiva rapport undersöker processen att utveckla ett implementationsförslag för ett användargränssnitt till ett spel som ska lära ut riskhantering till körskoleelever. Den reflexiva rapporten genomför också en analys av användargränssnittet och innehåller därför en kort genomgång av riktlinjer och gränssnittsprinciper från människa-datorinteraktion (MDI) samt teorin om Flow. Den reflexiva rapporten avslutas med en utvärdering av arbetsprocessen och lärdomar kring arbetet. Slutsatsen som dras är att riktlinjer och principer från MDI samt Flow inte alltid kan appliceras på ett gränssnitt i ett sådant tidigt utvecklingsskede men en designer kan fortfarande få mycket användbara reslutat av att göra en analys..

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

Syftet med detta arbete är att undersöka hur olika implementeringar av Juuls uppdelning av bestraffningstyper kan påverka möjligheten för spelare att hamna i tillståndet som Csikszentmihalyi identifierade som flow. För att undersöka påverkan av olika bestraffningstyper på spelares upplevelse skapades tre olika versioner av ett plattformsspel med olika implementationer av bestraffningstyper baserade på Juuls uppdelning av bestraffningstyper. Ett antal respondenter fick spela alla tre versioner för att därefter, via semi-strukturerade intervjuer, försöka förmedla hur deras upplevelse varierade från en version till en annan. Undersökningsdeltagarna observerades under spelning för att försöka fånga spår av flow-tillståndet i deras kroppsspråk. Även deras prestation i varje spelsession lagrades för att möjliggöra en jämförelse av spelversionerna.

Today dairy farmers in Sweden are obligated to have lights turned on during night time in addition to the mandatory daylight inlet. This presents a cost for the production but many argue that it can be economically beneficial, especially in loose housing of dairy cows. In loose housing and even more so in herds with automatic milking, well functioning cow traffic during all hours of the day is crucial to optimise production. In order to keep the cow traffic flowing, lights may be an important management tool. It is also perceived among farmers with tied up stall that night light decreases the incidents of cows accidental stepping on their own or neighbours udders.

The interest in harvesting wood fuel in conflict stands has grown in recent years as a consequence of the increased demand for biofuel. Conflict stands are young forests that have not been cleaned and have a large number of stems ha-1with a great height and diameter distribution. This means that traditional field measurements in conflict stands are difficult and very time consuming. Therefore, the forestry sector is in need of new, more efficient inventory methods. In this study, the Lidar data from Lantmäteriet?s (the Swedish mapping, cadastral and land registration authorities) new national height model was used in combination with plots from the Swedish national forest inventory from 2009 to create functions for; height, volume, diameter and number of stems.

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

Flow measurement is one of the greatest challenges in order to calculate efficiency in hydropower. Most hydropower plants in Sweden use differential pressure methods for flow measurement. These methods are dependent on constant conditions in the waterways. A change in these conditions, like turbine improvements, prevents differential pressure methods to verify efficiency improvements. Since efficiency improvements can?t be verified by one measurement system, another method, which isn?t affected by changing conditions, can be used.

The water level of Lake Mälaren has been regulated since the 1940?s. A recentinvestigation suggests that the current regulation needs to be adjusted in order toprevent a decline in water level, salt water from infiltrating from Lake Saltsjön,and risk of floodings. In addition to these preventions, the new regulation couldpotentially effect the natural environment and agriculture practices in the lowlands that surround the lake. The new regulation proposal calls for an increase invariations in Mälaren?s water level during seasons, while the annual mean waterlevel will remain the same.

  iiiAbstract?We are living in a time of project. Everything becomes project. All development, all efficient,all changes are running as project?.

In this thesis, the flows of reactive nitrogen (Nr) in Scania were investigated and quantified. The thesis was also intended to form a basis for comparison between the urban nitrogen flow and other flows of nitrogen within Scania. The management of nitrogen in society has disturbed the natural nitrogen cycle. This is linked to a series of environmental problems such as eutrophication, acidification, global warming and smog. The method used was Substance Flow Analysis (SFA) for Nr. For calculation and flow charts Scania was divided into three subsystems; air, water and society.

The aim of this thesis is to examine the flow of information in an administration of the municipality Borås Stad. To achieve the aim the following questions were asked: How accessible is information? How is information used in the organisation? How is information communicated? Totally sixteen qualitative interviews was accomplished with employees at the administration. The results of the interviews show that there is a difference in how much and what sort of information the respondents use. They all seem to prefer information to be communicated face to face if possible or over the phone.

From the customer?s perspective the only reason for a firm to exist is the value it creates. However, a problem within manufacturing companies is that of the total lead time, only a small part can be considered as value adding. It has further been discovered that when working with improvements businesses often sub-optimizes single processes instead of considering what benefits the entire company. Thus, when improving processes and activities it is important to have knowledge about and understand which factors that affect how the flow can be designed.Several studies have been performed with a wide perspective on process flows in order to obtain a more resource-efficient and value added flow.

By applying a segmentation procedure to two different sets of computed tomography scans, two geometrical models of the abdominal aorta, containing one inlet and two outlets have been constructed. One of these depicts a healthy blood vessel while the other displays one afflicted with a Abdominal Aortic Aneurysm. After inputting these geometries into the computational dynamics software FLUENT, six simulations of laminar, stationary flow of a fluid that was assumed to be Newtonian were performed. The mass flow rate across the model outlet boundaries was varied for the different simulations to produce a basis for a parameter analysis study. The segmentation data was also used as input data to a surface description procedure which produced not only the surface itself, but also the first and second directional derivatives in every one of its defining spatial data points.