By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

Lime Hempcrete consists of lime, water and hemp and creates an insulating, sound-absorbing, lightweight and environmentally friendly material that can be used in wall, roof and floor structures (Bevan & Woolley 2008). This construction method is not yet developed in Sweden as there has been a ban on the cultivation of the hemp plant. This ban on the cultivation of hemp was removed in 2003, when the material got a boost. You can use it in many different ways and not just in the construction industry (Ahlsten, 2010).In this study we have investigated the possibility to produce prefabricated wall elements of LHC. We have also studied its mechanical properties and dehydration time.

The purpose of this study has been to analyze the relationship between commercial brands and a subculture, with a focus on a number of elements of success. These elements could be in the nature of sale stats as well as that of influence within the subculture. All of this within the context of the snowboard culture. In accossiation to this we have formulated a question of study:What marks brands which gains influence within a subculture in addittion to becoming an important factor in the self-expression process of the cultural members?In this study, we have practised a qualitative method based on six (6) independant interviews with participants, active within the snowboard culture as well as one outside marketing executive and one ethnological reseracher.

FSC (Forest Stewardship Council) is the major form of certification system in Swedish forestry today and its more than 11 million hectares are covering almost half of the total productive forest area in the country. Its regulations prescribe that at least 10 wind firm trees should be left behind after every clear cutting operation. This study have taken place on 30 recently clearcut objects in Bergslagen, Sweden, were an inventory of the standing stock have been made. The research shows that, with 90 % security, the retained trees together contain 9-13 m3sk per hectare. Pine is the dominant tree and it covers more than half the numbers of retained trees and its volume cover 65 % of the retained trees total volume. Spruce is on second place with 30 % of the retained trees, but only 21 % of the standing stock.

Denna rapport är ett examensarbete på C-nivå som görs i sammarbete med teknikkonsulten Ramböll. Det vanligaste sättet att ventilera en byggnad idag är med så kallad CAV-ventilation (Constant Air Volume). Denna metod bygger på att ett luftflöde bestäms för rummet och upprätthålls med konstant flöde. En annan metod är så kallad VAV (Variable Air Volume) som bygger på att flödet varierar efter behovet. Anledningen till varför man väljer VAV istället för CAV är att med CAV finns det ofta en stor risk att man överventilerar ett rum eller byggnad, just på grund av att flödet är konstant. Problemet med VAV är att det är en högre investeringskostnad än för CAV så metoden lämpar sig bara där energibesparingen är så stor så den täcker mellanskillnaden i pris.

The purpose with this study is to find out how much dead wood we can expect us to find in a Russian reference river and compare with studies from Swedish streams. Dead wood are an important structure for the biodiversity in forest streams, studies have shown that population of trout can increase with up to 300 % when the amount of dead wood are increasing from 0 to 8 ? 16 LWD (Large woody debris)/100 m2. Dead wood are also an important structure for the stream character, formations of dams and pools which are important habitats and reproduction areas for salmon and brown trout. The study where taken place in tributaries to the Russian river Varzuga in the North West part of Russia outside Murmansk. Varzuga has low impact of human activity and is considered to be a reference river to rivers in northern Sweden.

Sweden is a country with few native tree species. According to Govt. 2007/08: 108, exotic tree species may be seen as an opportunity to increase the growth of tree volume in Sweden. Potential areas where explored In this work for cultivation with Pinus contorta var. latifolia Engelm., Larix sukaczewii Dylis, Abies lasiocarpa (Hook.) Nutt., Populus × wettsteinii Hämet-Ahti (tremula x tremuloides) and Picea mariana (Mill.) Britton et.al.

Piles of deadwood are often retained in forests after management to support the biodiversity ofsaproxylic organisms which depend on deadwood to survive. Any knowledge about the crucial role ofpiles as suitable habitat of saproxylic organisms compared to single distributed deadwood objects thatare around the piles would help conservation actors to motivate more forest owners to supportsaproxylic organisms during their management. Therefore to give facts to this the saproxylic fauna ofdifferent pile positions (up and low) was studied and compared to distributed deadwood samplesaround each pile. Our study was focused on saproxylic beetles. Some other parameters such asdiameter, deadwood volume, pile volume and decay stage were assessed to define any effect.

At the beginning of the 1970´s forestry feared an imbalance in the future wood supply. Because of this anticipated "timber slump" forest companies undertook a variety of measures to counter this. One of these measures was the introduction of exotic tree species. The choice finally ended up with lodgepole pines which were considered a fast growing tree species compared to our native tree species. Theambition for the new lodgepole pine stands were to run these with rotation periods of between 40-60 years, thus smoothing out the ?timber slump? that was anticipated.

Due to increasing product availability and higher demands on fast deliveries, the competition between companies is growing. To be able to satisfy the customers? requests an efficient logistics system with short throughput time is required. By using tools associated with Lean production companies are able to make great improvements in their manufacturing systems and reduce lead times to satisfy customer demands.There are two classifications associated with manufacturing, high variety and low volume (HVLV) and low volume and high variety (LVHV). The general belief is that the concept of Lean production is difficult to implement in a production environment with high variety and low volume due to the concept being adapted to mass production.

The Results of this thesis was the creation of two designed house variants with a module toall the apartments. In addition till the first module there are three other modules ofapartments that can be put in the houses if it so needs. The house are volume prefabricatedand are placed on site in a way that it create an enclosure of the area which faces against thenature and car parks also lies hidden behind these houses.For the actual structure, a cross beam was created to carry the floor above and it is supportby all four walls. The structure between the first and the second floor has no "syll" butinstead there are two differently alternative to linking the floors in order so that it will notmove. The reason with this solution was that there will not be any subsidence when theforces from above are pressed down ward.

This study in the subject of forest planning is made for Sveaskog and its aim is to develop tools that prognosticate outcome in terms of volumes per sort from not yet cut forest stands. The degree of detail is just to get reliable results for at least one months volumes, for Sveaskogs own forestland in the market region of Norrbotten that is about 100 000 m3fub. The course of action to accomplish this is regression analysis and the data consists of cut tracts on own forestland in Norrbotten during the years 2006, 2007 and 2008. That is a little more than 4 million m3fub. Two tools were made.

AbstractEssay in political science, C-level, by Bo-Josef Eriksson, spring semester 2007Tutor: Susan Marton?Universal morality - does it exist? - A case study of small states foreign policy?The purpose of this essay is to examine how well does realism stand of against idealism when the focus of the study is on small states foreign policy? The essay takes it?s starting point at the debate between the two theories of international relations (IR). Realism is the theory that has had the most impact on the study of IR since the second world war. Idealism has been it?s greatest opponent and the debate is still active even up til this day.My case study of Danmarks foreign aid policy constitutes a worst critical case scenario for realism and therfore my assumptions were that idealism would be the theory that could explain the core-elements of the Danish foregin aid.

The purpose of this thesis is to investigate how the metadata format Dublin Core is applied within five Swedish search engines. The objects of the investigation are Rättskällan, studera.nu, Svenska miljönätet, Svesök and the web catalogue of Uppsala University. Dublin Core is a flexible and adjustable format, which can be used in many different ways and in various projects depending on the target groups and objectives of the activity. We compare the differences and similarities between the five search engines concerning their usage of metadata in general and Dublin Core in particular. The material of the investigation consists of metadata records, which are collected by a robot and examined manually.