The objective of this diploma work is to investigate a set of Multiple Input Multiple Output (MIMO) channel models compatible with the emerging IEEE 802.11n standard. This diploma work validates also advanced, innovative tools and wireless technologies that are necessary to facilitate wireless applications while maximizing spectral efficiency and throughput. MIMO channel models can be used to evaluate new Wireless Local Area Network (WLAN) proposals based on multiple antenna technologies. The purpose of this thesis is to investigate means of channel models and their implementation in different environments such as: Matlab, C++ and Advanced Design Systems (ADS). The investigation considers also a comparison between the channel models based on theoretical data and parameter setup to the channel models based on statistical characteristics obtained from measured data.

The voltage regulation in Fortum Distributions medium voltage network in Stockholm does not work satisfactory. This results in too high distribution voltages with many customer complaints as a consequence. The reason is the model responsible for compensating for voltage drops in the distribution network. Despite several adjustments Fortum has not been able to find the source of the high voltages and has therefore appointed an investigation in the form of a thesis work.The aim of this investigation is to locate the error and to produce a proposal regarding the solution of this error using the existing system, common industrial knowledge, state of the art research and the option to use voltage readings from the different substations.The conclusion of this master thesis is that the largest contribution to the high voltage levels is made by the large compensation for distribution loses. Furthermore an additional error in the model has been found.

The goal for this master thesis project has been to investigate the power quality in adistribution grid, which has a high fraction of dispersed power production due towindmills. The study has been done on a grid in Laholm South of Halmstad, whereapproximately 45 windmills are connected to the distribution grid owned by SHKEnergi. The investigation has been focused on to two radialy fed 20 kV lines, wheretwelve windmills are connected.Voltage variations have been studied by creating a model of the grid in the simulationprogram SIMPOW. The largest deviation that has been found in any point of the gridis ±1.9 % of the nominal voltage. This deviation is a result of varying powergeneration from the windmills and the voltage regulation at the connection point ofthe line.

This master thesis has been performed at Vattenfall Power Consultant in Gothenburg and Trollhättan for Vattenfall Vattenkraft. In this report vacuum circuit breaker in small-scale hydropower stations with the rated power 4 MVA and below has been studied. Models of the stations are modeled and analyzed in PSCAD/EMTDC to study the high voltage transients that are created after current chopping with vacuum circuit breaker. Vacuum circuit breaker may chop the current before it reaches zero value, which means that high voltage transients can be created. The equipment of the stations can be destroyed by high voltage transients.The purpose of this thesis is to examine the use of vacuum circuit breaker in small-scale hydropower stations and the risk for high voltage transients from current chopping.According to the results there is a risk of high voltage transients after current chopping with small synchronous generators in stations with the operating voltages 0.4 kV and 3.6 kV.

The aim and goal of this work has been to design and implement a voltage reference network for a 12-bit PSAADC, Parallell Successive Analog to Digital Converter. A chip containing the design has been sent away for fabrication. Because of the long processing time, no measurement data are presented. The main specifications for the voltage reference generator is to generate stable reference voltages with low noise and a good PSRR. Efforts has also been made to minimize the power consumption..

To be able to evaluate different radio waveforms in a laboratory environment FOI in Linköping has developed an experimental system for radio communication called Rasmus. The system consists of a transmitter, a channel emulator and a receiver. The transmitter modulates a digital signal to a desired analogue waveform. The channel emulator is used to simulate a real radio channel. The channel emulator distorts the signal by splitting it up in several propagation paths.

Microproduction, also called distributed generation, is something that has become more and more popular in the electric grid. Microproduction can however lead to unacceptable performance if several units are installed in the same low voltage network. It is therefore good to know a limit where the performance of the low voltage network becomes unacceptable based on given parameters. This limit is usually called hosting capacity.In this report the hosting capacity with respect to voltage and current have been studied in three low voltage networks which are located in Falu Elnäts concession area. This has been done by simulations in a GIS-program where critical times of the grid have been simulated.

Minimizing power consumption is a critical part of many embedded design projects. Thechallenge is to limit the power consumption of the system and at the same time providesatisfactory service to the user. With regards to microprocessors, the main way of limiting powerconsumption during program execution is to adjust the frequency and the voltage at which theprocessor operates.To enable the implementation of real-time scheduling with support for dynamic voltage andfrequency scaling, an exhaustive study of the Freescale i.MX31 embedded microprocessor isperformed. Specifically, the power consumption relationship to all relevant frequency andvoltage settings is investigated. In addition, to enable frequency and voltage scaling in a real-timeenvironment, a complete timing analysis of proposed voltage and frequency scaling methods isperformed and their suitability for use in real-time systems is evaluated.To integrate voltage and frequency scaling capability into OSE RTOS, a software module hasbeen developed for this operating system.

Today?s companies offer their products and services through multiple distribution channels in an increasing extent, in order to reach bigger markets and more customers. Multiple channels result in an increased risk for channel conflict.This essay is an exploratory and descriptive study with the purpose to explore some companies? channel conflicts on the basis of sales commission and price differences. A case study has been made at two different companies and the empirical material has been collected with qualitative interviews.We found more channel conflicts in the company that uses sales commissions than in the company that doesn?t.

In this thesis a rural network in Norrbotten, Sweden, has been to designed and planned with the purpose of improving distribution reliability by exchanging existing overhead lines with underground cables. General network design considerations are discussed as well as the ones for the specific low voltage grid. During the design phase the maximum power of domestic consumers has been estimated using Velander?s method. Currents, voltage drop and impedance of the network have been calculated and fuse operation and selectivity has been considered.

Today?s climate changes will probably give rise to precipitation in Sweden, which will cause more floods in Swedish rivers. Many of the Swedish rivers are regulated and have lots of hydro-electro power plants. Higher floods in the rivers will give greater water loads on the dams, which mean that a higher discharge through the sluice gates and in the spillway channels is needed. High discharge of water in a spillway channel can create scour of the material in the channel.

No other object is in our constant possession such as the mobile phone. The smartphone has been transformed into a worldwide forum for information-rich exchanges between individuals and companies, by which this rapid access to the smartphone has created and continues to create opportunities in terms of communication. Many researchers of today undertake the challenge of studying the smartphone's role as a marketing channel, and the role of the channel is now undoubtedly central in marketing. However, as the importance of marketing communication increases and despite the fact that survey methods are exceedingly dependent on a channel to fulfill its purpose, namely carry out questionnaires, there has been surprisingly little attention to the study of the channel's role and importance when carrying out surveys. The main purpose of this paper is to investigate whether the choice of a communication channel affects the survey outcome and, if so, further investigate how survey methods differ in terms of consumers' attitude and also their perception of their privacy.

Purpose/Aim: The purpose of this essay is to analyze and discuss how MTV is affected by the development that takes place on the world?s media market. The aim is also to see how MTV?s target group?s image of the channel can give guidelines in how MTV should act in this new media era.Material/method: I have examined the development on the media market and then created a model consisting of relevant factors that could affect a TV-channel today. Those factors and the two factors image and profile are then applied on MTV.

The dissertation deals with an account of actual problem, which can arise within EMC and power quality. The cause of power interruption and what can be done to minimise the power interruption is discussed. It also includes a definition of planning levels and which factors one needs to have control over to carry out a possible planning strategy and how the local distributions net could be more secure. The electrical net could be secure but no system can be free from interruption.The dissertation examines two distribution transformers: GLA40T1 (Glansås) and T399 in Tranås Energy which don?t have regulators.

Purpose/Aim: The aim of this thesis was to examine how multi channel publishing in different stages effect the work for journalists.Material/Method: The thesis is based on ten case studies selected from the literature and one conducted especially for this thesis. The case studies have been categorized according to a model that describes three strategies for multi channel publishing. The first strategy is to have a primary publishing channel, the second is to have separate editorial staffs for all publishing channels and the third is to treat all publishing channels equally.Main results: Journalists working for companies using the first strategy have not experienced any major differences in working conditions or work practices. For journalists employed by companies using the second strategy for multi channel publishing the effects on the journalists was noticeable but not major. The effects on journalists in companies using the third strategy are mainly stress and an uncertainty regarding how to use special media techniques..