In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

Companies that invest in e-learning have different expectations regarding the outcome of the investment. According to literature and articles it is common that companies see reduction of costs as the primary benefit with e-learning. Therefore we ask ourselves the question if companies have attained the expected benefit of the investment in e-learning and to what extent cost reduction have been a determining factor in the investments? The purpose of the thesis is to examine if companies that invest in e-learning have attained the expected benefits. We also want to examine what the reason for investing in e-learning is and if cost reduction is the primary reason for investing. The study is founded on a qualitative method that is based on a case study in eight companies.

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

The division of Electricity at Uppsala University is developing a wave energy converter(WEC) consisting of a linear generator connected to a bouy at the water surfacethrough a wire cable called the connection line.During extreme conditions, the wave power plant will experience forces up to 500kN, which lead to unnecessary wear and will ultimately cause the failure of theconverter. To prevent this there is a need for a damper.The wave energy converter works at a maximum efficiency when the translator?sare centered with respect to the stator. Due to tidal movements the position of thetranslator can deviate. There for a mechanical divice that will compensate for this isneeded.This report describes the further development of an earlier project where a tidalwave compensator for a wave energy converter of Seabased AB was developed.

The effectiveness of communication in the Swedish healthcare system context has long been the subject of debate. Issues stemming from usability, accessability and interpretation affect the lives of patients, and yet the vocal groups in the healthcare communication debate are patients and administrators, not healthcare professionals. With the advent of eHealth services and new demands being put forth on the ability of healthcare professionals' to handle increasingly numerous and innovative systems, it is of more importance than ever to understand the healthcare professionals' work context. This article is based on interviews with five healthcare professionals concerning their views on electronic health records (EHR), eHealth services, trends in healthcare services development in Sweden, as well as their views on the future of eHealth solutions and health information technology (HIT). Analysis of collected information shows an apprehension among healthcare professionals towards electronic communication, as well as a dissatisfaction with the usability of modern healthcare systems.

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

Denna studie syftar till att belysa undervisningsmoment utöver musikalisk och sångteknisk träning som i yrkesförberedande sångundervisning förbereder sångeleven för yrkeslivet som professionell sångare. Detta för att främja arbetstrivseln hos professionella sångare. Studien har sin teoretiska utgångspunkt i hermeneutiken och socialpsykologin och har utförts med kvalitativ intervju som metod. Fyra professionella sångare har använts som informanter.I bakgrundsavsnittet presenteras litteratur och tidigare studier kring musikerns yrkessituation, arbetstrivsel, yrkesförberedande sångutbildningar, pedagogens möjlighet till påverkan på musikstudenten och för musikern vanliga yrkesrelaterade hälsonedsättningar.Studiens resultat stödjer tidigare forskning då flera teman är överensstämmande. Denna studies resultat är dock specificerat till sångarens livsvärld till skillnad mot den tidigare forskningen som mer generellt beskriver musikerns yrkessituation.

The examination has been performed at Bjerking AB, which is an architectural and engineering company. Bjerking AB has the ambition to be a member of Green Building.The Green Building program developed in year 2005 by The European Commission, the program is an environmental system with the aim to improving energy efficiency within the sectors of non-residential buildings. The minimum requirements to participate the program are following: in new-built buildings the calculated energy consumption must be 25 % lower than the requirements in the BBR (Building regulations) and in refurbishment the reduction must be 25 % lower than before the optimization.The aim of this study has been to examine and review the company Bjerking AB's energy efficiency work in the project of building the school/kindergarten S:ta Maria Alsike, where the goal is to get this building Green Building classed. A description of requirements to become a member of the Green Building has also accomplished in the thesis.The methods performed in this study are literature review, searches on the Internet, studies on the project database for facts/values, calculation of energy consumption and interviews of members of the Green Building. The following issues have been dealt with in the report;-          Did the building in the project manage the requirement to achieve an   energy consumption that is 25% lower than the requirements in BBR?-          What technical measures/system was selected in the building?-          What kind of cooperation was the project based on?-          What is required for consultancy companies and real estate owners to become members of the Green Building?The study of the project and calculation of estimated energy consumption in the building, give the result 47 kWh/m2, year.

This thesis investigates how energy is used in three public baths today and suggests measures that could reduce the energy demand. The results show that there is a great poteltial for energy savings i public baths, and that it would be interesting to examine some of the proposed measures further..

This report is about logistic efficiency in companies without own production. The authors have interviewed employees working at two companies, Telias store in Skärholmen and Orion Diagnostica AB. The purpose of the report is to find out which logistic functions the two companies are using to create efficiency.Today?s markets are more global. Different parts of a product can be made in different parts of the world.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

Deposited waste material degrades within a short period in anaerobic environments. The methane gas that is formed provides a harmful contribute to the greenhouse effect, 23 times larger impact than carbon dioxide. It is therefore desirable to minimize the emissions of methane gas from landfills. This may be achieved by drain the landfill of gas. In this thesis the amount of produced methane gas at the landfill at Örebro has been calculated. Estimations have also been made of the amount of methane gas that might be produced in the landfill in the future.

Chewing behaviour includes both eating and ruminating activity. Chewing behaviour is of great importance for the feed intake as through the action of chewing (i.e. eating and ruminating) animals mechanically process the forages in small particle sizes and prepare the food for digestion. As cattle grow the chewing behaviour changes along with increasing body weight and chewing efficiency is increased. The aim of this thesis was to review the available scientific literature in order to describe chewing behaviour in growing cattle, as well as the factors that affect this behaviour.

In this study, the efficiency of a newly launched predatory mite, Amblydromalus limonicus, has been examined for its potential to use as a biological control agent in cucumber production. A. limonicus can be used for biological control of two thrips species, Frankliniella occidentalis and Thrips tabaci. Field trials were conducted in greenhouses of two conventional cucumber growers in Scania, the southern part of Sweden. The basic control agent used against thrips was the predatory mite Amblyseius swirskii. In selected areas, additional A.