In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

A Geographic Information System (GIS) is about presentinginformation with the map as a base. This is increasingly being used on internetsites and in mobile apps. With a GPS it is possible to see where you are andhow to reach a destination or check if the bus is in time. A question to ask isif this technology is possible to implement in ordinary primary schooleducation. If it is, learning history, geography, religion and so on with a GISlearning tool might be possible.

This thesis investigates the possibilities offered to a working landscape architect by anincreased and altered use of digital 3D environments. A basic assumption is that increased useof digital three-dimensional environments promotes the creative processes and presentationoptions of landscape architects.The thesis is based on literature studies and communication with working landscapearchitects, and includes an investigation of the visualization methods available in the Blender3D modelling software. The thesis provides a thorough survey of what it means to model inthree dimensions, as well as of what modelling methods are feasible for a landscape architectto use. As landscape architects, we work with human and unique processes, and thus it isdifficult to develop standardized and automatic software for our profession. One possiblesolution is to turn to open source development, where software and models are shared andanyone can contribute.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

In some cases there are no methods to identify raw material which are included in dietary supplements such as tablets. The identification can be done with TLC. A general method description was developed using the raw material gotukola and appel cider vinegar. This includes processing to achieve higher concentration of the active ingredient if needed; evaluation of solubility agents to dissolve the active substance; evaluation of mobile and stationary phase and visualization of the stationary phase. The report also includes an evaluation of stationary plates..

Detta examensarbete är gjort för Kårhuset Trappan AB genom att använda ramverket Geovisual Analytics Visualization (GAV), som är utvecklat av National Center Visual Analytics (NCVA). Examensarbetet producerade en applikation för att följa företagets inköp och försäljning av artiklar. Applikationen är en webbplats i flash, och skrevs i Actionscript med Adobe Flash Builder 4. För att göra applikationen användarvänlig genomfördes en förstudie, och kriterier för den visuella designen sammanställdes..

This report discusses developing a software log tool for analysis of industrial processes. The target was to develop software that can help electro Engineers for monitor and fault finding in industrial processes. The tool is called PLS (Process log server), and is developed in Visual Studio.NET Framework 2005. PLS works as a client with Beijer Electronics OPC Server. The program is able to read data from PLC (Programmable Logic Controller), trough the OPC Server.

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

Development and accuracy tests of advanced exchange trading systems require well adjusted tools for testing. Aptness of these tools are probable to have a major impact on identification of bugs and verification of new functionality. Identifying erroneous parts and bottlenecks of the trading system is of outmost importance for the exchange as a whole since stability and correctness are two of the determinant factors its viability is measured by. This paper covers how this test-tool was created and the motivation behind the design choices made. The tool was created with the goal to be broad enough to cover the majority of cases that could arise, fast enough to be able to test the trading systems speed limitations (i.e.

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

Volvo Human Monitoring (VHM) is an ongoing project at Volvo Cars where they measure, amongst other parameters, inhalation and exhalation through a device called Respiratory Inductance Plethysmograph (RIP), on drivers. RIP measures changes in the cross-sectional area of the chest and abdomen. When the driver is in motion, such as when she is turning the vehicle, the cross-sectional area changes and noise in the RIP signal may arise.The noise results in a large number of manual adjustments in the analysis of the RIP signal, which is very time consuming and the validity of the device for measuring inhalation and exhalation is questioned.The purpose of this study was to improve the efficiency of the analysis of the RIP signal. The goal was to create a new data processing tool in Matlab that automatically detects inhalation and exhalation from a RIP signal with higher validity compared to the previous data processing tool.In this study, nine tests were performed on drivers while they were driving in different scenarios such as highway, country road and in city traffic. Inhalation and exhalation was measured using a RIP, a pneumotachograph with a tightly sealed facemask and a thermocouple placed between the nose and mouth, which was used as reference to the RIP.The result of this study was a data processing tool that automatically detects inhalation and exhalation with higher validity compared to the previous data processing tool.

This thesis presents the work of developing and testing a programming tool specially designed for children. The purpose of this tool is to make children capable of creating visual simulations and games that consist of actors interacting in a virtual world. The name of the programming tool is Behavior Cards, which comes from the fact that actors are programmed by giving them cards representing different kinds of behaviors. Behaviors are to some extent pre-programmed and can include general events specifying how the actors should act in different situations, in contrast to specifying every possible situation that can occur. The idea is that Behavior Cards should be easier to use than a more traditional text based programming tool, but it should also be expressive within the domain of visual games.

The aim of this study is about how school librarians useweblogs as a working tool. I wanted to examine how someschool librarians use weblogs as a working tool and why theyare using them. I also wanted to know the advantages anddisadvantages they see with this tool. I believe that children andteenagers are interested in social media- tools and also are bigusers and consumers of these tools. Therefore I thought it mightbe interesting to examine how school librarians who havechildren and young people as their main target group, work withweblogs which is one of many social media tools.The methodology used for this study is interviews.