This report brings up the question - ?Is BIM profitable when planning a single-family home??.The methodology for finding the answer to this question is firstly to state the definitions of BIMand the company that is projecting by using the BIM-model. The answer is then obtained byanalyses of the factors of profitability with respect to: time, opportunity of revision, problemvisualization, preference adjustments and energy. A BIM-model has been made simultaneously asthe writing has proceeded to get a perception of how a BIM-model really matters for the analysis.The analysis shows that the answer for the question depends on further factors. The factors thatare mostly discussed are the company?s intentions and the complexity of the house.

Bakgrund: Smärta är för intensivvårdspatienten en unik, subjektiv, obehaglig och flerdimensionell upplevelse. Intensivvårdssjuksköterskan har ett moraliskt ansvar att lindra patienternas smärta. Verbalt icke-kommunicerandepatienter kan inte skatta sin smärta med hjälp av Numeric Rating Scale (NRS). På en neurointensivvårdsavdelning (NIVA) i Stockholm har det beteendebaserade smärtskattningsverktyget- the Critical-Care Pain Observation Tool (CPOT), implementerats. Intensivvårdssjuksköterskorna på NIVA använder CPOT dagligen i sitt arbete.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

The purpose of the study is to highlight educators' preferences and attitudes towards tablet in preschool by describing the use of this digital tool in the preschool educational activities. The use of tablet in preschool is in the study looked upon as a phenomenon. The description of the phenomenon is built on the analysis and interpretation of educators' statements about it. The research questions focus on the following aspects: educators' attitudes towards the tablet and its use in pre-school educational activities, the tablet's current area of use, the culture surrounding the use of this digital tool and the educators? statements about advantages and disadvantages of tablet's use in preschool.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The aim of this study was to conduct an instrument test of the Canadian questionnaire Alberta Context Tool (ACT) version Long-Term care for Swedish conditions. ACT is designed in order to measure the context in the care environment and different behaviours related to the changes in clinical practice. In total, 159 Licensed Practical Nurses (LPNs) and Registered Nurses (RNs) within municipality care of the elderly were included in the survey. The test included the instrument's reliability and face validity.The reliability test was implemented through calculation of Cronbach´s Alpha, and showed internal consistency for five of the scales of the ACT-instrument with Cronbach´s Alpha values ranging between 0,728 and 0,873. However, three dimensions got lower values (0,558 - 0,683).The analysis was carried out with content analysis and carried out for LPNs and RNs in separate groups.

For this study I use a critical realism approach and the aim with the thesis is to elucidate humor as a socially reflexive tool. My investigation has its starting point in the stand-up comedy arena, which I mean can exemplify a social context where the communication is focused around humor. I mean that humor can be used to create imaginary variations of the knowledge and truths, which we live our lives according to. The asymmetrical interpretations of the socially reflexive tool humor can be used to identify, elucidate, and cope with the diverging truths of life. But even though humor has boundless possibilities to reshape knowledge, it is also limited by the social contexts where it is mediated and by the involved individuals that create the humor or sanction the humor positive and/or negative..

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Thesis purpose: The purpose of this study is to investigate the interdependencies within the process of partner selection in the fashion and design sector and the emanating criteria for finding the ideal co-branding partner in order to use co-branding as a strategic brand activation tool. Methodology: Multiple Case Study Theoretical perspective: Brand Building and Brand Activation, Relationship Marketing, Strategic Alliances, Affinity Partnering, Co-Branding, Consumer-Brand Relationships Empirical data: Interviews with expert consultants and company representatives (adidas, BMW, BMW MINI, Diesel, H&M, Opel, Philips, Sharp, Volkswagen) Conclusion: Partner selection depends decisively on the different co-branding aims and incorporates the crucial step when using co-branding as a tool for strategic brand activation. The co-branding aim and the corresponding partner lead to various types of relationships, which, in this study, are anthropomorphized to connect the world of marketing and branding to real life. Fashion and design brands have proven to be particularly eligible as co-branding partners for brand activation due to their innovative and trend-oriented nature..

This thesis aims to examine the possibility of understanding social change by using new institutionalism approaches on a specific case, The case, which describes the implementation of new public management reform in the Swedish health care system, is analysed from two separate new institutionalismperspectives; the tool perspective and the symbol perspective. These approaches differ from one another in the sense that the first relies on a rational choice ontology, while the latter rather refers to a sociological tradition. In the analysis, causal explanations as well as aim related explanations are presented. Formative moments such as economic stagnation, non-socialist governments and ideological isomorfism are presented as important factors behind the reformation. By using the tool perspective, the motives of the idea spreading and reformation of the Swedish health care system, are connected to a strictly rationalbasis such as cost efficiency and quality improvements.

As the title insinuate, this essay illustrate Event Marketing as a marketing instrument, and how it can be used as a tool to facilitate brandbuilding and improve relationships. We have come to the understanding that Event Marketing is in the course of constant development. It seems like Event Marketing as a marketing tool is starting to get its well-merited position in the marketing mix throughout the world, since companies and other organisations have realized that Event Marketing is a powerful tool for differentiation. We have also seen that Event Marketing in the business world lately has come to be more important for building and maintaining relationships, as well as carrying marketing messages.In this essay we discuss Event Marketing in three sections; brand, relationships, and customer experience. Among these topics, inter alia Integrated Marketing Communications, Sensory Marketing, and Service-dominant Logic are presented.

This paper deals with the difficulties of applying user-centered design practices as an independent developer, based on the visualization of a game concept in the form of a prototype. The aim is to evaluate the usability of user-centered design practices, specifically in the field of games development. Throughout this paper, I will give an account of the methods used for testing, as well as a review of previous research done in this field of study. Finally, I will end with a discussion regarding the pros and cons of user-centered design, as well as some thoughts about its importance in similar projects..

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.