The aim of this paper is to find an algorithm to establish and maintain a virtual enclosure around a mobile unit. The area may take any form and should be scalable up to and including national borders. The enclosure is managed on the mobile unit. The target system is Android. Smartphones, tablets and more recently, cameras is examples of mobile units. A modern mobile unit is part of a computer network.

The aim of this masters thesis was to study how the members of a small non-profit organisation perceived the web forum, compared to the other information channels of the organisation. The organisation was defined as a virtual community. A literature review was conducted. The theory construction was based on the sensemaking theory. Interview questions were constructed based on the literature review and the sensemaking theory.

This master thesis was written in the purpose to study how the location and access to computers in the physical realm of the public library reflects the undergoing changes in the public libraries role in Swedish society. This study is done in a form of a case study of three small public libraries. All of them were in the process of transforming both their physical and virtual space. The thesis focuses on where in the library the computers are placed and how their location interacts with the libraries main tasks. It also focuses on the analysis of the relationship between these two elements and how that relationship reflects the alteration of the public libraries place in society.

Avsikten med detta arbete har varit att undersöka huruvida någon prestandaskillnad föreligger mellan nätverksnodernas vidarebefordring av prioriterad trafik i en nätverksmiljö med Quality of service-funktioner (QoS) implementerade och nätverksnodernas arbete i samma nätverksmiljö med separata, virtuella nätverk uppsatta med hjälp av Virtual routing and forwarding (VRF). Målet var att resultatet ska ha möjlighet att väga in när för- och nackdelar mellan olika sätt att separera nätverkstrafik jämförs ur prestandasynpunkt. Rapporten beskriver arbetet med samt resultatet av ett empiriskt experiment som kontrollerade VRF:ers påverkan på QoS-funktioner. Ett fysiskt nätverk sattes upp för att kontrollera hur QoS påverkades av logisk separering av experimentmiljöns nätverk på lager tre med hjälp av VRF. I detta nätverk utfördes även ett kontrollexperiment utan logisk separation för att skapa en baseline samt ett experiment där separering utfördes med hjälp av accesslistor.

During the 1990?s a large number of building projects were revealed where lack of moistsafety precautions during the construction process had led to extensive moisture damage. Alsoresent implemented studies have shown that the problems with moisture damages have ratherincreased than decreased during the past few years. Moist is considered to be one of the mainfactors to cause unhealth due to deficiencies in the indoor-environment and does also causeunnecessary expenses and a reduction of the confidence in the construction industry.In this Bachelor of Science thesis three projects have been reviewed to examine how moistsafetyhas been observed during the construction process. Main focus has been to identify thebuilding components that are the most exposed to moist, and to examine how they have beentaken into account during the period of design and construction.

Syftet med detta examensarbete är att på uppdrag av Volvo Construction Equipment hitta en metod för att hantera och kategorisera idéflödet i deras idéhanteringssystem Interact. Den metod som användes var kvalitativ innehållsanalys. Slutsatsen är att metoden gick att använda för att kategorisera idéflödet men att ett material som sträcker sig över många ämnen tenderar att sänka tillförlitligheten på resultatet. Vidare bedöms materialet som detta arbete har producerat kunna användas för att bättre ta tillvara på idéer, vilket uppskattas av Volvo Construction Equipment..

The purpose of this study is to investigate the method called zero recognition that is used in accounting for construction contracts when the outcome is uncertain. When this is the case it is hard to make the necessary estimates needed for the percentage of completion method to be used. Both the meaning of the method from an accounting perspective and the practical importance and purpose of the method is investigated. The method used for this study is the qualitative one and the deductive model is used to relate the theory with the empirical research. The theoretical background consists of accounting theory and theories about individuals, companies and markets.

Looking at the debate on nuclear power in Sweden, the issue of risk is central to understanding the difficulties in resolving differences between proponents and opponents. I sought to answer the research question: "how is the concept of risk constructed in the nuclear power debate in Sweden?" Four main aspects of risk construction were defined and investigated to identify differences between sides in the debate. Through a qualitative study of the debate and its actors I found clear differences in respect to all four aspects of risk construction. First, the perception of nuclear power as a "normal risk" is common among nuclear opponents in contrast to a largely probabilistic view among proponents.

Safety in the construction industry has become a question of top priority in recent years. Despite a massive investment of time, money and knowledge, the occur-rence of fatal accidents in Sweden alone is around one a month.The purpose of this study is therefore to improve the safety on the construction site. By an examination of the role of the safety agents and their cooperation with the construction workers and supervisors as well as examine how safety agents can improve safety on the construction site, which is the goal of the study.Four questions were formulated based on the purpose and the goal of the study.The methods used to answer the questions were a questionnaire survey, multiple interviews, a literature review and a document analysis.The report describes the safety agent?s role as a complex one with many different tasks. The role of the safety agents is regulated in the health and safety law, but it can sometimes be difficult to interpret and the agents can therefore interpret their role differently.

Work Environment problems on construction work sites are very extensive and discussed. The construction industry is one of the most dangerous industries in Sweden. The construction industry occupies about 290 000 employment (2009), and the investment was 250 billion SEK. This report will investigate the issues of the work environment and offer advice on how these can be measured and imporved. The study includes review and analyses of occupational injury statistics, interviews, inspections and audit and review of the literature.

Today?s construction buildings contain more advanced technologies than before. The development of newer and stricter regulations to the construction industry makes the door environment more and more complex.In large construction projects the door environment is held up as a major challenge to get to in a good way. It turned out after a discussion with one project manager and a site manager at NCC, that the door environment is difficult to get right in major construction projects and it often causes many error reports in to the aftermarket after that the final inspection is completed.Interviews have been done with key figures in the building process at NCC and Akademiska hus. A study on a university building for around 3500 students and with 300 workplaces was made.

During my studies to become a guitar builder at Carl Malmsten CTD, I have found an interest in the construction of the classical guitar. I am fascinated by the simplicity of its construction. A simplicity that becomes more complex when you start to study it in detail.In my final thesis I will not try to explain this complexity. The subject is to investigate two different principles regarding its construction. I would like to find out if the sayings concerning one of the principles will yield a guitar with greater ability to produce volume and projection.At a close distance the difference between the guitar?s volumes is not to speak of, but a significant difference can be seen regarding one of the guitars ability to project its sound.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

When constructing a road the risk of emission of substances from the used materials to the surrounding environment has to be evaluated. The aim of this study is to present a proposal for how to evaluate the risk of contamination as a result of emission from the materials in a road construction. The study is based on literature studies, an inventory and a questionnaire that examines how experts in governmental agencies, industries and universities evaluate the risk of contamination. The inventory indicates that guidelines for evaluating the risk of emission from secondary materials in a road construction do not exist. The conclusions from the questionnaire are: that there is no common way to evaluate the risk of contamination as a result of emission from materials in the road construction, there is no uniform interpretation of the terms "minor" and "significant" risk of contamination and that the evaluation is subjective.

The purpose of this thesis is to outline an appropriate model in order for companies to successfully act and compete physically as wholesalers at the same time as acting on the virtual market by selling directly to the end consumer. The approach of this thesis is hermeneutical and abductive with elements of hypothetically deductive approach. Our research has a qualitative research strategy based on case studies and interviews as well as on secondary data. Interviews were conducted with the case company JaymJay Wear AB as well as with other companies, so called mini cases. The secondary data consists mainly of textbooks, web sites and journals.