Background: The construction industry is Sweden?s single most important industry branch with a significant influence on Sweden?s wealth. The political restrictions that once controlled the industry are today almost gone. This combined with an unbalanced supply and demand situation on the Swedish constructions market, caused by urbanisation, has led to increased pressure on the Swedish construction companies who now are forced to find new methods in their struggle to contain or increase their competitive advantage. Purpose: The purpose of this thesis is to survey: which strategic variables are of great importance in today?s Swedish construction industry with focus on the four main actors, JM, NCC, PEAB and Skanska.

In Sweden there is no legal regulation for the obligations and responsibilities between the contracting parties within the construction, civil engineering and installation sector. To clarify uncertainties regarding the liability, actors from theses sectors have agreed upon a voluntary regulation, called the General Conditions of Contract.When insurance companies want to enter the Swedish construction insurance market, they face a regulatory framework that not only regulates the construction market, it also imposes requirements on terms and conditions that must be included in the construction insurance. These terms are perceived as ambiguities and create difficulties and inhibit the ability for these insurance companies to offer competitive insurances. One of the terms that create these difficulties is the guarantee period, which is period of time starting from handing over the construction project to the employer, during this period the contractor still has the responsibility for the construction project. The guarantee period regulated by the General Condition of Contracts differs from the international use of the term both in length and in content.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

This study includes several purposes which are to describe the concept of working environment, explain who is responsible for its functioning and how the working environment should look like. Other purposes the study have is to investigate how the working environment is in both Swedish and the two investigated companies construction sites and to share some operators proposing measures for the shortcomings and problems that exist in the construction sector working environment. To achieve these purposes was a qualitative study made with unstructured observations, interviews and survey where three construction sites were observed. The result shows that the concept of the working environment cover many aspects and is essentially about the environment we live in and experience in our work and this environment can be both an indoor as an outdoor environment. In this work, the concept is divided into four areas; it is the physical, the ergonomic, the psychosocial and the chemical.

The purpose of this thesis is to outline an appropriate model in order for companies to successfully act and compete physically as wholesalers at the same time as acting on the virtual market by selling directly to the end consumer. The approach of this thesis is hermeneutical and abductive with elements of hypothetically deductive approach. Our research has a qualitative research strategy based on case studies and interviews as well as on secondary data. Interviews were conducted with the case company JaymJay Wear AB as well as with other companies, so called mini cases. The secondary data consists mainly of textbooks, web sites and journals.

The construction industry depends on functioning logistics; if the logistics isn?tworking the construction site will risk to be interrupted due to material shortages orproblems with deliveries. Despite this, the construction industry is battling logisticproblems daily. This problem is very time consuming and costly for the companies.These theses are written for Peab Bostadsproduktion and investigate if it is possibleto focus on logistics earlier in the building planning process to reduce the problemsthat occur. Peab has partnerships with three companies that could be helpful for themin the work of reducing logistic problems.

Styr is a computer program that the construction company NCC use in their construction projects. The program is used to keep the economy of their projects in a good order and things for the best in an early phase. The problem is a low extent of utilization. During the latest decade NCC has put a lot of job and money trying to develop the program. The question is how to get the employees to use the program in a greater extent.

Denna studie har undersökt hur en grupp elever använder ett virtuellt rum som klassrum. Effekten blev att de lärde sig fakta med hela kroppen. Det virtuella klassrummet kan bli ett nytt pedagogiskt redskap för skolungdomar där de kan vara med och bygga upp eller påverka innehållet. Studien är en etnografisk undersökning där jag har studerat multimodalitetsteorier av bl.a. Gunther Kress i vilken man tar hänsyn till alla teckenvärldar som ljud, bild, gester och kroppens rörelse i rummet.

Arbetet syftar till att undersöka förutsättningarna för att skapa en virtualiserad utvecklingsmiljö för Windows som installeras och konfigureras utan manuell övervakning. Utvecklare på Sandvik Systems Development (SSD) arbetar ofta med olika utvecklingsverktyg eller använder sig av olika versioner av utvecklingsmiljöer och detta är ett problem. Det är också vanligt att utvecklarna blandar sina kontorsapplikationer med utvecklingsmiljön vilket kan vara en stor säkerhetsrisk. Ett annat stort problem är att tiden kan vara väldigt lång för inhyrda konsulter och nyanställda att få sina utvecklingsmiljöer installerade, vilket resulterar i stora kostnader för SSD. En möjlig lösning till problemen är att använda virtuella maskiner som utvecklingsmiljöer.

Logistics planning for a construction site is usually limited by traffic flow to and from the workplace. The geographical location of the construction site is determined by roads around the workplace and opportunities for well-functioning logistics. Inventory of material is often impossible because of the frequently small workspaces. As a result, a concern relating material handling remains . Even before the establishment of a construction site, it is required in the construction industry to eliminate errors that might arise in the planning stage.

This bachelor thesis addresses the problem of appeals against house building in Gothenburg. The thesis investigates whether there is a statistically significant relationship between demographic factors and the occurrence of approved, appealed and revoked permits for new construction of residential buildings in the ten districts of Gothenburg. This is done with a correlation analysis. The report also investigates whether there is a statistically significant regression in the same demographic factors and how these individually affect the average processing time for appeals in the districts. This study is done with a multiple regression analysis.

This report compares two different types of insulation with regards to fire and moisture. The materials were tested for the company Fiskarhedenvillan AB, for a wall and a roof construction that the company currently uses in the establishment of Sweden's first certified passive house for international standards.Their current material, Rockwool, is compared to a relatively new material on the Swedish market called SEALECTION Agribalance sold by the company ISO Green AB. The material is a type of polyurethane insulation. This insulation material would result in a more efficient execution of the construction as it provides waterproofing and is applied more easily than Rockwool. From a fire standpoint, literature studies and discussions with fire experts led to results.

This study has been conducted on behalf of Vectura Consulting AB with the purpose to examine how different actors perceive the dimensions of sustainability and sustainable construction. The purpose is also to provide an understanding of existing barriers and opportunities for sustainable construction within the industry and exemplify with different directions for the actors in order to develop sustainability. The study has approach the research problem by using systems theory, developed by Checkland, to identify the relevant system. Other systems theories has been used as an theoretical framework in order to identify barriers and opportunities, which in this study are based on Hughes?s theory about reverse salients and salients.