This thesis was performed at Indusec ABin Stockholm. Indusec AB is a companythat develops security solutions.Together with the Police of Sweden theyhave gotten the assignment to develop anapplication based on one of theiralready existing product Inferno soundbarrier. This application is supposed tobe mounted on a ballistic shield thatthe police use, the application consistsof a speaker box (the sound barrier) anda trigger with wire. The trigger withwire is the part that will be addressedin this thesis. The application willthen be used as a tool to surprise atarget at various skirmishes.The project consists of three majorphases, pre-study, concept generationand modeling.

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.

The intention of this essay has been to investigate how the new digital technology has affected the tourism industry and marketing, as well as how travel agents and tour operators adapt to this. We also aimed to get a broader view of how the future might look like when it comes to marketing and virtual service landscapes. We decided to base our research according to these following four questions:? What affect travel agents? way of adoption to the technical development?? What purposes do the travel agents have for building up their virtual service landscape?? How much does the travel agents emphasize on digital marketing?? What can travel agents do to better adapt to the technological development in the future?We have chosen to use a qualitative research for this essay. The reason for choosing a qualitative research was to gain a wider understanding that would represent a big part of the changes of technology development.

The purpose of this project was to design an adjustable gutter bracket for Lindab Profil AB. Lindab currently manufacture a gutter bracket that is adjustable in angle, however, this model has some drawbacks.  One of it´s shortcomings is that it is somewhat difficult for the customer to mount.  Another problem with Lindab?s current model is that the design makes manufacturing unnecessarily complex. The new gutter bracket, that we have constructed, does not have these problems. It is adjustable for different roof pitches.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

Background - Swedish trade and industry primarily involves small corporations, including small manufacturing corporations. Currently, most costing models that are used are based on studies accomplished at large corporations. This conveys to the fact that product costing that occurs at small manufacturing corporations is based on all complexities that large corporations bring, which rarely match with small corporations. It occurs that small manufacturing corporations unconsciously rely on incorrect information that has been calculated based on great corporations? product costing.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

Corporate Social ResponsibilityThis thesis intends to exam the strategic use of Corporate Social Responsibility within fifthteen different companies, classified/divided into three various industries. The aim is to compare the three different industries, to look for disparities and similarities in their use of CSR. The disseration looks into both variance and resemblance in the use of Corporate Social Responsibility between the companies within the same branch of trade and between the industries.The industries of intrestThe three industries that the study has focus on is consumer, manufacturing and service related industries. Where the consumer industry is classified as companies with direct sales towards private consumers, the physical citizen. The manufacturing industry is classified as companies that manufacture products but that does´nt sell their products directly to the regular consumer.

The aim of this master?s thesis is to examine the virtual reference service Ask the Library [Bibblan svarar] from a postmodern perspective. Ask the Library is a Swedish online reference service that is run by the country?s public libraries. The postmodern theories of Jean-François Lyotard are used to study how information is managed and transmitted within the service.

The aim of this paper is to find an algorithm to establish and maintain a virtual enclosure around a mobile unit. The area may take any form and should be scalable up to and including national borders. The enclosure is managed on the mobile unit. The target system is Android. Smartphones, tablets and more recently, cameras is examples of mobile units.

The purpose of this study was to investigate the levels of social distance used by the librarians and users in the virtual reference interview. With a conversational analysis and applied politeness theory 49 chat transcripts where analysed in order to answer the question of how the interlocutors positioned themselves regarding the social distance between them. By identifying what communicative strategies where used the following results were found. Generally the social distance between librarians and users is low in the Swedish virtual reference interview. Even though both parties used informal and casual language the results indicate that the librarians face wants were valued slightly higher than the users which were illustrated by a some what higher social distance in the stages of the conversations when the librarians face was under most threat.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

This Master thesis discusses the development of a virtual human soft tissue object for use in exercise applications of various medical procedures.The soft tissue object to be developed shall look like, feel like and behave as living human tissue. It shall give the user a realistic feeling of weight, softness and roughness, and shall behave in a correct way for exercise purposes. The soft tissue model is to be used in a three dimensional stereo graphic environment with haptic feedback. A prototype for practicing the procedure of inserting a catheter is built. The prototype is used to evaluate the potential of the virtual environment for medical exercise applications, and to assess the realism and usability of the soft tissue object.

In this day and age we carry out our purchases through different channels. We can shop our clothes and computers in a store or online. Nowadays we can even purchase our groceries through the Internet. The biggest retailer chains within groceries in Sweden have established virtual stores online and are distributing the goods in cities throughout the country. This thesis is dedicated to investigating crucial success factors when going about selling groceries online.