This report is the final result of the master thesis that have been done at  Sharpman Engineering. Sharpman Engineering is a small development and manufacturing company that produces and make drawings for everything from heavy duty log raft to aids for disabled people. The purpose have been to make one concept that make it easy for elderly and people having problem with knee- and back problem to stand up from a sitting position. The final result will the company have for further investigations and use for a pre-serial production with the goal to produce a new working product.To get an overview of what is on the market have a comprehensive survey has been done, followed by a survey on patent. This patent survey are for no intrusion on existing patents should occur and give new ideas.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.

The aim of this thesis is to investigate if an automation of the manual packaging process at Legosan AB is profitable. Legosan AB, located in Kumla, performs subcontract work of dietary supplements and medical products to companies within Europe. The chapterportal robot is used in the other. As there are several options in the choice of packaging robot the suggestions of improvement are divided into two different designs. Other machines and equipment necessary for the different suggestions of improvement are showed and their measurements are presented.

To be able to protect themselves from credit risk, the banks must constantly check the performance of  the companies they have lent money to. There are many mathematical models for predicting financial distress. These models use accounting-based ratios, which often are historical and not representative for the present situation. This study describes how the banks do in practice to find signals of insolvency in time and the variables they are observing for doing that.In addition to financial reports which the company sends in to the bank at least once a year, also the relationship between them and information from different information  agencies are of great importance to track  signals of insolvency. Poor profitability is the primary cause of insolvency.

A water treatment unit consisting of two aeration basins, two settling tanks, a residence basinand a horizontal subsurface flow wetland were used to treat wastewater from an eggprocessing factory in Brazil. The aim of this paper was to determine the efficiency of thesystem in reducing nitrogen, phosphorus, BOD5 and TSS (among other parameters) andgetting a further understanding on different kinds of constructed treatment wetlands as well astheir nitrogen and phosphorus removal processes. The wastewater from the factory consistedof process water from manufacturing and water used for cleaning, no stormwater or sewagewater entered the system. Tests were taken three times a month from October 2013 ?til April2014.

The purpose of this study was to explore the use of a blog in the classroom. This paper describes why the teacher created the blog and how the blog is used by teachers and pupils in and outside the classroom. The study also describes teachers? thoughts regarding future use of the blog. Seven primary school teachers were interviewed and the material was analysed using a multimodal design theoretical perspective on learning (Selander & Kress 2010).The conclusion of the study was that the teachers created and designed blogs to give parents, pupils, relatives and others an opportunity to have an insight into the pupils? school day.

The public health care sector has come under increasing pressure to cut down costs, maximize productivity and satisfy patients' needs during the 1990s and onwards. As a way of "getting more for less" quality management has been introduced. Originating in the private manufacturing industry, quality management has a strong focus on productivity and efficiency, aspects which are measured in quantitative terms. However, there are strong concerns that quality management is a means of speeding up the marketization of public health care by introducing core values much different from the ethic and medical norms that traditionally underpin health care organizations.This essay focuses on how quality management has been introduced to, and transformed by, public health care. A theoretical framework based on new institutionalism is constructed, and translation theories are used as a way of illustrating how the medical institutional environment, in fact, changes the concept of quality management.

To challenge the competition within the construction business there are requirements ineffectiveness and use of operating computer based programs and work-methods. Thecomputer based programs are continuously improved and can at some point be the start of anew work-method. The work-method of tomorrow can be Building Information Modeling(BIM).This Master of Science Thesis gives an understanding in what BIM is and what therequirements for Sweco Theorells are in a future BIM-use as a consulting-firm. Theunderstanding is presented through a study of theory within the subject. The way of thinkingand acting among different disciplines and individuals within the building process isexplained through an interview study.The term BIM is regularly used.

The development of the web has become an attractive area, with continuously and rapid development in the area it has led to a big change in the way of learning. Learning is a concept with many definitions, but a definition that is many at hand is that learning means that individuals seeking new knowledge and experiences that shape their goals, behavior and environment.With the development of the web a new way of learning emerged, E-learning. E-learning integrates information technology with the traditional learning to offers a flexible way of learning for students where they won't be dependent on time, place or others issues that would prevent their learning. E-learning takes shape of an application, LMS (Learning Management System). Today LMS are widely used in many universities, but with new technique comes new problems. The constant developments of the LMS have made the decision to use LMS difficult.

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

The aim of this project is to examine the needs and problems that exists amongst homeless people and to develop a solution that will help them in their everyday life. Since the homeless are a relatively large vulnerable group i Sweden, their everyday lives could be made easier in many ways.A clear definition of the target group is put together to create a good starting point. What state and help orginazations do to help the homelss and the society?s view of the homeless is also relevant and has been documented. Four personal stories have been put together to desicribe cases of clear problems existing in everyday life.Several interesting problems has been defined from the research and acceptance in the communtiy, desire to be seen and heard and a lack of confidence were the main needs.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

Syftet med denna studie var att undersöka vilka upplevelser unga vuxna har beträffande den virtuella gemenskapen på Internet communities och hur det påverkar deras hälsa och lärande. Studien grundar sig på folkhälsopedagogiskt perspektiv och bygger på en kvalitativ studie. Under genomförandet av arbetet har åtta individer deltagit i individuella intervjuer. I bakgrunden belyser jag hur den teknologiska utvecklingen förändrar det sociala samspelet i samhället. Ökande kommunikation via Internet communities har bidragit till att människor kan ha större sociala nätvärk utan fysiska hinder.

This examination project has been performed in collaboration with Husqvarna AB, one of the world?s leading manufacturers of both commercial and professional garden products such as chainsaws, trimmers and lawnmowers. Husqvarna AB always strive to develop and improve new and existing products and components to ensure an attractive product and a competitive position on today?s market One of these components is filled balances. This is a component unique to the company and is one of the parts in their fuel-powered chainsaws.

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.