The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

Osseointegrated titanium implants have become a commonly used method in edentulous jaws and today there are success rates in the magnitude of 82 % in the lower jaw and 98 % in the upper. During first year after implantation a fully normal marginal bone loss of 1-2 mm occurs. If the bone loss continues there is a risk of implant failure. High tensions in bone and inflammation caused by bacteria are possible reasons for this problem. It has been shown that a leakage of bacterias occurs between the parts of the implant and there are theories that this has effects on the marginal bone loss. The aim of this thesis has been to increase the knowledge about microbial leakage with help of in vitro tests and virtual simulations.

This report describes the development process of a pipe clamp used on exhaust system for cars. It is made based on the manufacturers desire to improve and make the clamp easier to manufacture and to reduce its price to their customers. This should be done either by manufacturing the clamp in one piece without an expensive and work intensive welding process, or by generating ideas of how to develop a brand new type of clamp. Investigating the market for similar products was done to eliminate intrusion of other manufacturers? patents but also to generate ideas.

AbstractResource efficient manufacturing is a term that has been increasingly applied within manufacturing, where one of the key points is to reduce waste of such forms that do not add value for the end customer. By the Lean principles, there are seven plus one types of waste, in which the definition of the eighth point varies among sources. In this study, the eighth type of waste has been interpreted as the untapped creativity and competence among employees that has not been put to use. From this, our question was incubated; How can you make the most of the employees? untapped creativity and potential within manufacturing? The case study will be developed with empirical data obtained from Dometic Group by conducting interviews.From the gathered literature, it was concluded that the communication between employees contributed to an increased understanding of one another as well as it allowed for improvement in work.

Den svenska byggbranschen står i nuläget inför en stor teknisk förändring, införandet av Bygg-informationsmodeller(BIM)/Virtual Design and Construction (VDC) i stor skala. Branschens olika aktörer ser olika vinster med implementeringen som kommer påverka hela byggprocessen, från projektering till förvaltning. Denna studie fokuserar på organisation och process i projekteringsskedet och grundar sig på en fallstudie av Veidekke Entreprenad AB. Företaget har implementerat VDC i delar av organisationen och i nuläget, efter lyckade pilotprojekt, utvidgas satsningen och implementering görs i större skala. Studiens syfte är att kartlägga Veidekkes VDC-mål och strategier, för att därefter studera process och organisation i projekteringsfasen och hur de bör utvecklas för att skapa goda förutsättningar för att VDC-målen ska kunna uppfyllas.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

The aim of this thesis is to explore the relationship between the surrounding world and the library with respect to the library?s need to provide a Library 2.0 web site. We also explore the relationship between the physical and the virtual library. Our research objects are the public libraries of Stockholm and the Umeå region, that maintain the web sites Biblioteket.se and minabibliotek.se respectively. By applying Dorte Skot-Hansen's theory of rationales we found that the Stockholm public library is acting in accordance with the experience rationale, whereas the libraries of Umeå are influenced by the instrumental rationale.

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Bygghantverk, 27 hp, 2012.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.

Recent studies show that manufacturing companies to a larger extent use historical cost accounting in their internal accounts, at the expense of calculated costs. The explanation behind this is claimed to be that firms are subject to careful scrutiny by the stock market. Consequently, top management stresses the need of evaluating all parts of the firm from external accounting. However, lower management levels express a general concern that the incentive to invest in machines will decrease. This master thesis aims to investigate whether or not there is an objective reason behind this concern.

3D modeling is a common tool in landscape architecture. Today, there have been new ways in which virtual 3D models are successful tools in the dialogue with the public. These new methods involve children and young people who are groups that is hard to reach and engage in citizen dialogues. The purpose of this work was to investigate how a virtual 3D model works in the landscape architect?s communication with the public through the project Gruvstadsparken in Kiruna. Through workshops, I wanted to communicate Gruvstadsparken to get ideas from participants on how the park can be used and be revisited.

This Master Thesis is a product development project that has been carried out in cooperation withLappset Sweden AB.The purpose has been to develop a group of products suited for parks andtraditional playground locations. The specific target area has been courtyards of newly builtresidential areas. (These pieces of open land resemble glades that can be found in the forest,which in Swedish is called ?gläntan? and has given name to the product family). Therefore thedesign should match contemporary architecture.

Ett problem entreprenörer ofta ställs inför vid uppstarten av ett företag är en avsaknad av antingen kapital eller kompetens eller en kombination av dessa båda. Hur avgörande är nätverket för ett företags möjlighet att genom ett tillskott av kompetens och kapital förverkliga en vision och bli framgångsrik? Vilken betydelse kan en inkubator ha för ett företags framgång? Syftet är att beskriva hur en specifik inkubator fungerar i praktiken samt utreda när denna utgör ett lämpligt alternativ för en entreprenör. Vi vill även förklara hur ett nystartat företags utvecklingspotential påverkas av att få tillgång till både kapital och handgriplig hjälp med kompetenstillförsel, genom att vara en del av denna inkubatorverksamhet. Vi har tillämpat en induktiv ansats, genom att vi låtit studien ha sin utgångspunkt i empirin.

Problem: In society of today corporate competence is an important factor for survivor and development. IT is developing rapidly and can not be ignored by companies. Then need for people with IT-competence is conquent increasing. A survey of corporate IT-competence is therefore of interest for companies as well as for local authorities. To determine the IT competence within an organisation, this competence has to be measurable.