This study has been conducted on behalf of Vectura Consulting AB with the purpose to examine how different actors perceive the dimensions of sustainability and sustainable construction. The purpose is also to provide an understanding of existing barriers and opportunities for sustainable construction within the industry and exemplify with different directions for the actors in order to develop sustainability. The study has approach the research problem by using systems theory, developed by Checkland, to identify the relevant system. Other systems theories has been used as an theoretical framework in order to identify barriers and opportunities, which in this study are based on Hughes?s theory about reverse salients and salients.

This paper examines and compares several different sites in Sweden in addition to one in Mexico regarding whether the ecological requirements theses sites have had during planning and construction has affected the design in any way. Is it possible that, for different reasons, one thinks ?like nature? when one thinks of ecology and, if true, how does this reflect on the spatial and structural design? This paper tries to identify if some sort of general design expression is used in projects with requirements on ecological sustainability. In total, five projects have been compared in different areas such as choice of materials and their composition. These projects have an ecologically sustainable processing of water in common, although most also have ecological consideration in other areas as well.

A large cost at the construction sites today is the labour cost of the workers. But unfortunately the worker potential is not used to full. It is not unusual to take into a count with a work-­?place-­?additional-­?time of 50% in some cases. By increasing the workers' motivation and responsibility for their tasks may reduce the time considerably, which also increases the potential for greater gains in construction projects.By using the situational leadership may the workers level of maturity develop entirely.

Trough a literature study based on both philosophic and objective fact this essay is taking off in the meaning of public space. It investigates how the information society and its virtual world are affecting the idea and use of public space in the city. The city and the actual world have developed from the traditional meeting between people while the virtual world is based on flows of information. The information flow has expanded through the Information and Communication Technique (ICT). ICT covers among others Internet, mobile phones and computers.

Det har blivit allt mer populärt på senare tid med inredning av hemmet, och det finns idag stora möjligheter med virtuell 3D, vilket gör projektet relevant för tiden vi lever i. Projektet handlar om att skapa en första prototyp av en möblerbar 3D-miljö med tillhörande användarvänligt gränssnitt som ska kunna användas i Mios varuhus. Prototypen bygger på två demofilmer av applikationen där gränssnittet och användarens interaktionsmöjligheter har visualiserats i en vanlig skärm, och 3D-miljön i en 3D-skärm, dessa har sedan synkats med varandra för att ge ett helhetsintryck av applikationen. Gränssnittet skulle vara så pass användarvänligt att Mios kunder själva skulle kunna använda applikationen och med hjälp av speciella 3D-skärmar och renderingstekniker skulle miljön framstå som verklig. Projektet startade med en förstudie, med intervjuer och research.

A case study of professional interaction designers' usage of design materials was conducted. Five interviews were performed in order to gain insight in the systems used by designers, how these work, how they collaborate within them, and what they think of recent research about them. Design studios allow collaboration for several users at once. Digital material (mockups, pictures, etc.) are commonly used, but needs to be made analog, e.g. printed, to be usable in the design studio environment.

Webexhibits is a growing but unexplored, cultural phenomenon that indicates a new use of the Internet for cultural communication. In the essay two quantitative methods, logganalysis and websurveys, have been used to study the visitors in 5hus.nu. The purpose is to generate knowledge about webexhibits as a cultural manifestation and medium by studying the experience and actions of its visitors. To achieve the aim the paper explores the methodological questions of how to study webusers. Theories about the exhibition as a medium and the web as a virtual area of exhibits have been used to understand and interpret the results.

Contents:The evolution of today?s computer influenced society has taken giant steps towards virtual reality, game addictions and the possibility of not having to meet the people we communicate with. What is a reality today?To give a more concrete image of our question we?ve chosen the online game World of Warcraft as an example and to describe our connection to an alternative reality. We have performed different investigations, interviewed both gamers and non gamers, all this to give us the opportunity to see if the term reality has started to change in a direction that will allow us to call this alternative world a reality, or if it?s just a world wide phenomena of for example gaming addiction.

In today?s modern society with high-speed connections covering the globe people are more than ever finding themselves gazing into the cold lights of the computer screen. On the other side a strange and exciting world yet to be explored awaits. Many are those who spend hour after hour running over green hills swimming in vast blue oceans in the lands of Azeroth, the playfield in the MMORPG game World of Warcraft. In media we often read and hear alarming reports on players stuck in this virtual world, ceasing to play a part in the real world.

This master thesis has been a product realization process. Having BRIO:s walking cart as thestaring point the purpose was to further develop the principle of such products and at the sametime broaden their sector of use. The final result is to be regarded as a complete solutionmeant as a foundation for further development at the BRIO Company. The product aims tosatisfy the demands and needs of the target group called theon the go parent. Trends, qualityand purchase power are features that characterize this particular target group.The project resulted in a walking stool namedBRIO Circus after its source of inspiration.

This Diploma work investigates internal air ventilated crawl-space in respect to construction and damp. The Diploma work assumes from a general description of crawl-space and general dump problems in ground construction. An internal air ventilated crawl-space is a construction where you take the ventilation air from the building and bring it down to the crawl-space and lets the air circulate before it passes through a retaining aggregate on the way out from the crawl-space. In this matter you get a worm space under the building and a lot less dump problems in form of · Ground damp · Build damp The ground dump reduces through draining around the building, different layer of gravel between the ground and the building and ventilation of the crawl- space. The build dump reduces through ventilation of the crawl-space as fast as possible.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

A new site- and construction-law came into effect in May 2011. The new law, PBL2010:900 implies several different changes of the law. These changes concern bothconstructors, people working in municipality and county councils and other peoplethat in some way are related to the building sector. Except from the change in orderof the chapters and the renewed and modernized language, the law has now beenextended with a few new phases.According to the new law a certificate has to be issued to start and finish theconstruction; the construction consulting has changed name into technical consultingand the protocol for the controls has to show what the control is being compared to.This diploma work concerns control visits on construction sites as related to the newlaw. The reason why visits on construction sites are now implemented in the law isbecause the government saw a lack of trustworthiness in the old law.

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

Design management är ett arbetssätt som har börjat tillämpas av allt fler företag de senaste åren, men det kan fortfarande vara svårt att förstå betydelsen av design management. I uppsatsen undersöks det vilken betydelse en design managers kompetens och position har för samarbetet mellan det designköpande företaget och en designkonsult under ett designinköp. Genom ett flertal intervjuer, utifrån både design managers och designkonsulters perspektiv, undersöks det hur samarbetet fungerar mellan dessa parter. En analys av intervjumaterial med hjälp av en teoretisk referensram bestående av design management-teori, design som en integrerad process och beslutsrollsteori har lett fram till ett antal slutsatser om design management. Några av slutsatserna är att design management, enligt teorierna, som arbetssätt inte är så vanligt och att det finns en viss samarbetsbrist enligt de intervjuade designkonsulterna, som i viss mån underlättas om design managern har kunskap om vad design innebär..