The aim of my study is to get an idea of how some teachers use homework, what they consider a good homework is, and what considerations they take to the students' home circumstances. I have made a qualitative interview study with four middle school teachers. The results of my study show that teachers can flip the classroom and use so-called preparatory tasks. The time saving aspect is a strong reason they choose that model. That students are able to practice their own responsibility and perform meaningful homework seems to also be in focus, but the biggest reason they use flipped classrooms seems to be because it is a more equivalent homework then traditional homework, and that students and their guardians also appreciate the flipped classroom model as they become more involved in their children's schoolwork..

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

This master thesis deals with problems in the arc length control in Pulsed MIG/MAG Welding. The main problem is that it is not possible to measure the arc length. In the present solution the voltage over both the electrode and the arc represents the arc length. To improve the arc length control a model of the electrode melting has been built. One output from the model is the voltage over the electrode and with this voltage together with the measured voltage it is possible to calculate the voltage over just the arc.

The aim of this Masters thesis is to examine librarians attitudes and values when it comes to the question if a new media, video games, should be introduced at the library or not. Video games are here seen as media primarily for youths. In our study we also wanted to study the discussions of quality and purchase, when computer games were introduced at the library. In order to answer our questions we conducted nine interviews with librarians working with children and youths, in eight libraries. By analysing their statements, using Maj Klassons theory where she defines the librarians role in three different strategies, we could demonstrate how the librarians reason when it comes to video and computer games, youths, quality and purchase.

This is a pattern project for textiles, with main purpose to develop and challenge my design process and to experiment with a mix of different printing techniques. The goal of the project was to create three textile individuals as representatives of my experiments, inspired by natural surfaces.The world of fashion have been an inspiration and has been the model for these textiles, with its powerful and playful patterns. With the world of fashion as a model, I also chose to work with the materials habotai silk and silk velvet. The qualities of these materials has also been influential in my design language.The work has been very focused on experiementation and exploration, and resulted in three printed fabrics that I have chosen to call Björkalm, Lindstam and Lavbädd..

This study aims to examine preschool teachers' thoughts about the child libraries functions. The purpose is to highlight preschool children's early read and writing skills, before they even can read and write, which is a theory called emergent literacy.This is made by conducting five qualitative interviews, with the intention to investigate how the preschool teachers think about the cooperation and the function of the child library, partly for their own work with the children and partly for their organization. By using a tablechart which shows each preschool teachers mostly common thoughts in the interview and by using a model based upon Harrysson and Joelsson (2006) model, which shows the functions of the public library in the society. The results of the study are presented in the four categories of the model which are; to borrow, to learn, to ask and to find, to reside. These are functions that the preschool teachers see with the library, for their work with the childrens' early literacy.

This study presents a methodology that enables the annual average power of a wind turbine to be increased by automatically optimizing it?s airfoil, twist and chord dis- tribution. As a part of the study the software SiteOpt has been developed. This software connects the open source software XFOIL with the blade element momen- tum theory. XFOIL gives lift and drag coefficients which enable the blade element momentum theory to predict the power of a wind turbine at different wind and ro- tational speeds.

The problems with train-induced vibrations are increasing with heavier and faster trains. Therefore the work with propagating vibrations is of outmost importance, and that is what this thesis relates to.To get a sensible idea of the propagation, calculation models are often used. Propagation calculation models takes into account factors such as distance to the railway, the ground material and the velocity and weight of the train. This work is mainly about finding suitable existing models and, if necessary, adjust them to be more useful with modern trains and railways.The report contains the work of adjusting one such model and does, despite the fully functional adjusted model, describe how much more there can be done within this topic. Finally, a few tips about specific areas that preferably should be studied to get even further knowledge about the troublesome problems from railways..

This thesis includes a review of scientific studies of tree injuries following mechanized thinning. Interviews have been made with drivers of single grip harvesters and forwarders in forest thinning and a number of essential factors have been identified as the most important to take into account in order to minimize and/orprevent injuries to stems and roots of remaining trees..

AbstractTitle: When book becomes film... ? a comparative analysis of the book and film Catch me if you can (När bok blir till film?En jämförande analys av boken och filmen Catch me if you can)Number of pages: 46Author: Majlinda JunikuTutor: Amelie HössjerCourse: Media and Communication Studies CPeriod: Autumn term 2007University: Division of Media and Communication, Department of Information Science, Uppsala University.Purpose/Aim: To study what model of dramaturgy belongs to the film Catch me if you can and to see what has been crossed out, altered and added from the book so the narrative will fit this model.Material/Method: The film Catch me if you can and the book with the same name has been used to analyze the differences between them. I have divided the differences into three categories: Crossed out, Altered and Added. In the analysis section these have been presented in each section of the film.Main results: Catch me if you can is definetly a film made with the design of the Anglosaxon model, mostly because of its timestructure and that it portrays an action and not just a condition which is normal in the epic-lyric model.

The aim of this thesis is to analyse the possibility to identify the FRBR entity expression from existing catalogue records performed within the context of Swedish cataloguing rules. The empirical study uses a sample of records from the catalogue within the library at the University College of Borås. To begin with, the thesis reports some of the earlier discussion about the FRBR model. That gives an understanding of which problems the model has and justifies the study?s delimitation towards expression.

For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

Objective: In recent years there has been an increasing interest within the clinical (medical) science in measuring people?s health. When estimating quality of life, present practise is to use the EQ-5D questionnaire and an index which weighs the different questions. The question is what happens if the individuals estimate there own health, would it differ from the public preferences? The aim is to make a new prediction model based on the opinion of patients and compare it to the present model based on public preferences.Method: A sample of 362 patients with unstable coronary artery disease from the Frisc II trial, valued their quality of life in the acute phase and after 3, 6 and 12 months.

The purpose of this project was to design an adjustable gutter bracket for Lindab Profil AB. Lindab currently manufacture a gutter bracket that is adjustable in angle, however, this model has some drawbacks.  One of it´s shortcomings is that it is somewhat difficult for the customer to mount.  Another problem with Lindab?s current model is that the design makes manufacturing unnecessarily complex. The new gutter bracket, that we have constructed, does not have these problems. It is adjustable for different roof pitches.

The purpose of this report is to find a model of statistics for construction and demolition waste, which makes it useful for the local manager at the building site. The intention with the model is that it will be used as a support of the local manager, to direct his project towards reduced strain of the environment. The model will also be used to make it easier to control that the claims from authority and aims for the environment are achieved. To familiarise with the subject waste handling within the building and construction sectorI have done a literature search. I have also been studying rules and regulations regarding the waste handling.