This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Syftet med detta examensarbete är att vidareutveckla glasfiberbalkar så de kan användas som mellanbjälklag i småhus. Förebilden var ett ?Delta Deck? som utvecklats av Altakor Group och används i brokonstruktioner. Denna profil har vi sedan modifierat och optimerat för bruk i småhus. Den största skillnaden är att vi valt att inte använda den så kallade ?snap-fit?-tekniken.

With the huge amount of computers connected to the Internet the IP-addresses are starting to run out. The Internet Engineering Task Force, IETF, have decided that it is about time to exchange the old 32 bits Internet protocol, Ipv4, to a more modern 128 bits protocol called Ipv6. This thesis explores the possibility to install Ipv6 in different operating systems. By testing various operating systems and by set up criteria compare them to each other we give the reader a picture of how the installation is done. We also show which operating systems to prefer if you want to use IPv6.

This report describes the scientific work of designing and manufacturing an intelligent controller module prototype for automobile trailer connections. The functions of the module are both to drive the lamps and detect failures. The module also contains functions to handle other functions of the trailer. To learn about controller modules the group does extensive feasibility study.The group receives three already existing modules, the functions of the three modules are studied and tested in the lab, this is done too get a overview of the construction. The method used I called reversed engineering, a way of constructing by analyzing constructions already done.When the modules are analyzed, the functions of the prototype are tested and designed without copying the analyzed modules.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Through this thesis, we want to discuss how the marginalization of people, several precedent political, city planning- and engineering decisions resulted in a catastrophic outcome after hurricane Katrina in New Orleans 2005. We also put forward a case study of the Make It Right Foundation, to demonstrate how the residents of the Lower Ninth Ward are involved in the urban development of their community. We would like to draw attention to the power of citizens and how they can influence the urban development of a community after a trauma. This study also focuses on the mission of The Make It Right Foundation: which is to rebuild the Lower Ninth Ward with firm concepts on sustainable development where all dimensions are accounted: ecological, social, cultural and economic. The empirical data was collected by a field study in New Orleans 2010-03-22 and semistructured interviews were made during the same days..

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Due to their complexity and heavy wear from rail traffic, switches are a sensitive part of the railway infrastructure and moreover expensive to maintain. Furthermore, increasing railway traffic not only accelerates the wear rate but also obstructs the necessary maintenance measures. This paper examines the opportunities for a transition to a long-term maintenance strategy in the Swedish railway network. It contains a study of the maintenance strategy of Banverket, and also analyses statistics of errors in the railway infrastructure. The survey was completed utilising interviews with infrastructure managers, maintenance contractors, planners of railway operations and the Banverket material service department.

Styr is a computer program that the construction company NCC use in their construction projects. The program is used to keep the economy of their projects in a good order and things for the best in an early phase. The problem is a low extent of utilization. During the latest decade NCC has put a lot of job and money trying to develop the program. The question is how to get the employees to use the program in a greater extent.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

The communication with government and municipality through Internet has in-creased during the last couple of years. Therefore we have chosen to focus our bachelor thesis in this particularly area and the needs for usable web services for the citizens. In this bachelor thesis we are studying a increasing group users, namely elderly citizens. During the study we have analysed E-governments ser-vices usability through usability tests. The combination of conversations and meetings with individuals, observations of interactions and literature studies give us the opportunity to explore the users needs.

This project was conducted during the spring semester 2013 at mechanical engineering program at University Halmstad. The project was conducted in collaboration with MPQ Consulting in Halmstad. MPQ Consulting is a newly established company looking to take step into the product development world. The company has already had ideas and existing products. One of the ideas is to construct and design a form of beach games whose rules are based on the volleyball rules.

IT-användandet i byggbranschen har banat väg för nya, effektivare arbetssätt och det finns visioner om hur det ska fungera. Syftet med vårt examensarbete är att ta reda på byggbranschens användande av, och vision om BIM. Vad är BIM ? Building Information Model?Kort beskrivet är BIM en modell där all information för ett byggprojekts hela livscykel kan hanteras. BIM förenklar det fortlöpande arbetet genom hela byggprocessen genom att tillhandahålla information om projektet som är relevant, uppdaterad, integrerad, fullt koordinerad och av hög kvalité.

This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.