District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

Purpose: The purpose of this thesis is to examine the ERK model's relevance, validity and potential need of development to better reflect how it looks today (2013). Method: The study is conducted through three surveys; the first two were face interviews with companies that sponsor Swedish soccer teams and the third study was conducted with a questionnaire to supporters outside a soccer stadium. Results: A model that would better reflect the reality of today (2013) could contain company pride, chairman?s whim, exposure, relationships and associations..

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

Numerical simulations play a vital role in both static and dynamic stability assessment of electric power systems and the foreseeing of voltage collapse. Simulations performed by Svenska Kraftnät(SvK) are mainly done in the specialized voltage collapse predicting software tool, SPICA and the more all?purpose software tool, ARISTO.The grid operators at SvK use SPICA to predict the maximum transfer limit at specified sections (in this report the section in concerns is the southern part of Sweden i.e. interface1 4). SPICA is mainly used as an online application by using actual states from the grid, these states update every quarter of an hour.This thesis is a continuation of the master thesis SPICA ? ARISTO JÄMFÖRELSE by Jakob Katzman and Johan Fält.

I ett samhälle där relationer, även sådana av icke romantisk karaktär, har en central roll imänniskors liv är det viktigt att försöka förstå vad som ligger till grund för individers engagemangi relationer. The Investment Model säger att engagemang i relationer ökar då individerupplever ökade belöningar, minskade kostnader, färre attraktiva alternativ samt att deinvesterat mycket i relationen. I föreliggande tvärsnittsstudie undersöktes 61 grundskolelärarei Göteborgs Stad, med hjälp av the Investment Model, angående upplevt engagemang tillsitt arbete via ett frågeformulär. Studien visade att grundskolelärare med längre anställningstidupplever att de investerat mer i sitt arbete än vad de med kortare anställningstid angav..

Distrilux International AB, a company within the Electrolux-group, works among other things with storing of products from other companies in the Electrolux-group. This rapport contains a cost analysis of the two Distrilux warehouses in Motala and Mariestad. The company offers five services in these warehouses, in-loading of products from a local factory and from external factories, storing, out-loading of products to Sweden (domestic) and for export. Since there has been some hesitation of the accuracy of the price-model of today, a master's thesis has been advertised. The purpose of the thesis has been to investigate the agreement of the price-model of today and the apportionment of the costing in warehouses.The main problem is to determine which activities is to be considered important in the price-model.

In modern industrial robots the components in the transmission contain nonlinearities. These nonlinearities need to be to estimated either for better control or to use the parameters for diagnosis of the system. There is a lot of work done within system identification and mainly within the field of iterative parameter estimation.This thesis considers recursive grey-box identification for a nonlinear model of the transmission in an industrial robot. The nonlinearities that are identified are friction, spring stiffnes, hysteresis and backlash. These nonlinearities are a part of the models that are presented in this thesis.

As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

Making the work in the public sector more efficient is something that has been seen as necessary during the later years. One way to do this on municipal level has been to apply solutions former used mostly by private companies. The organisational parts have also been adjusted to existing conditions in this work of change. For example more and more municipalities have come to use the purchaser-supplier model since the beginning of the 1990's. Norrköping, Linköping and Motala have been chosen in this essay for a closer study of the effects of the changes of the 90's, from an efficiency point of view.

In this paper I have sought a suitable level of abstraction in my models describing the landscape; the models are made to be viewed from eyelevel. Because of the spectator being ?in the model? the objects included need a certain degree of realism. I have sought what is needed in the model to be able to comprehend that the model is showing a landscape. Some details might be unnecessary.

Foreign invested SMEs have recently become increasingly interested in China. The enterprises are in this report categorized as second wave companies since they follow the footsteps of previous pioneers, of which mostly were larger companies. The ambitions of the SMEs are either to sell products on the ever expanding Chinese market or to utilize the potential of low cost production for global markets. The existing literature is fragmented and solely based on the experience of larger companies. We believe that SMEs are facing new and different challenges, and thus a new generic theoretical frame work is desirable.

In order to facilitate testing of anesthesia machines a patient simulator has been required by Maquet Critical Care AB. A patient simulator has been developed to reduce expensive and time consuming animal experiments and temporary lab arrangements. The patient simulator has been developed and designed to simulate human lungs with regards to anesthetic uptake, production of carbon dioxide and heating and moisturizing exhaled air.The system comprises a container and a test lung to simulate the volume and the dynamic of the human lung. The simulation of uptake of anesthetics has been implemented by pumping a fraction of the gas from the container through a bypass circuit with an active charcoal filter that adsorbs volatile anesthetics. The flow through the bypass circuit is generated by a pump and is controlled by a linear valve.The resulting performance of the patient simulator has fulfilled the requirements.

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.

Background: Many authors consider knowledge to be a significant source for competitive advantage. Replicating companies found their competitiveness on an ability to leverage its knowledge base by replicating its business model in new contexts, a process often referred to as the McDonalds approach. Several authors emphasize that an efficient method for knowledge transfer may increase the risk for imitation. Purpose: The purpose of this study is to examine in an explorative manner how strategies for replicating complex knowledge systems are employed and developed. Furthermore, our ambition is to explore the notion of replication strategy.

An important task for Region Skåne is to allocate resources to the health care districts. From 1999 to 2002 Region Skåne used needs-based resource allocation as a model for allocating resources. In a needs-based resource allocation individuals with the same socioeconomic and demographic characteristics are assumed to have the same level of need and are therefore allocated the same amount of resources. During the period of needs-based resource allocation a matrix model was used as a method. In the matrix model individuals were divided into cells after each combination of the socioeconomic and demographic variables.